"rec30 pvc-f"

Wiring Duct Cover, for 2" Wide PANDUCT Wiring Duct, Lead-free PVC, Intrinsic Blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Eaton commercial specification grade duplex receptacle, #14-10 AWG, 20A, Commercial, Flush, 125V, Back and side, Brown, Brass, High-impact nylon, PVC, 5-20R, Duplex, Screw, PVC, Core pack

Category: 20 Amp Commercial Grade Duplex Receptacles

Panduct® type FS solid wall wiring duct, 1 W x 1 H, 6' length, PVC, white.

Category: 2-Piece Non-Metallic Raceway

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

Panduct® Solid Divider Wall, 2.00" Nominal Duct Height, 6' Length, PVC, Light Gray

Category: Wall Duct Dividers

Wide Slot Wiring Duct, 3" W x 2" H x 6' L, PVC, Black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Metallic, Fusible disconnects are available in 30 and 60 Ampere models Pullers are removable or reinstallable in the OFF position for user safety during equipment maintenance Listed for use as service entrance

Category: Metallic Pullout Type Air Conditioner Disconnect Switches

70 Amp, 3-Pole Series C NEMA F-Frame Molded Case Circuit Breaker, Type FD, Cable In/Cable Out, 35 kAIC, 600 VAC, 250 VDC, Fixed Thermal-Magnetic Trip. Includes: Load Terminals only

Category: 600V Rated Molded Case Circuit Breakers

6" PVC 22-1/2 X 60" RADIUS WITH BELL ENDS

Category: 22-1/2° PVC Sweeps

Labels Can Be Permanent Or Repositionable; Once Applied, Numbers & Letters Are There To Stay - Unless You Want To Change Them. Made Of B-498 Plastic Coated Cloth With Pressure Sensitive Adhesive That Sticks To Any Clean, Dry Surface. Choose From 8 Diffe

Category: Repositionable Labels

90 Amp, 3-Pole Series C NEMA F-Frame Molded Case Circuit Breaker, Type FD, Cable In/Cable Out, 35 kAIC, 600 VAC, 250 VDC, Fixed Thermal-Magnetic Trip. Includes: Load Terminals only.

Category: 600V Rated Molded Case Circuit Breakers

Detectable Cable Tie, Bright Blue Polypropylene for Temperatures up to 85 Degrees Celsius (185 F) for Indoor Applications, Length of 343mm (13.5 Inches), Width of 6.86mm (0.27 Inches), Thickness of 1.5mm (0.06 Inches), Tensile Strength Rating of 267 Newtons (60 Pounds)

Category: Non-Releasable Cable Ties

PAS PT-2097HGRED

Category: 20 Amp Hospital Grade GFCI Receptacles

PAS 2097 RADIANT SELF TEST GF

Category: 20 Amp Specification Grade GFCI

400A 600V F Thread Stud Panel Mount, Female, Orange

Category: Electronic Fast Acting Fuses

Coax Prep Tool, 3-in-1 tool for loosening/tightening Cable TV "F" connectors from jacks, as well as flaring the cable jacket and holding the connector during cable assembly

Category: F-Connector Tools

Ul 508 Type F - Xt Iec Fvnr Combination Motor Controller, 1a, 45 Mm Frame Size,24 Vdc Coil

Category: Combination Manual Motor Controllers

Nimbus4Flex Insulated Flexible Aluminum Multi-Tap Connector, Conductor Range 3/0-6, Flex 2/0-6 H,I,K,DLO 1-6 M, 4 Ports, Dual Sided Entry, Mountable, Tin Plated, UL, CSA

Category: Dual Sided Entry Wire Connector Blocks

1/3 insert with 15-pin high density female to female coupler, SVGA capable, white.

Category: Multimedia Outlet System Wallplate Inserts

Self-Regulating Heating Cable, 100-130 Volt, 150°F (65°C), Electrical Freeze Protection for Nonhazardous and Hazardous Locations

Category: Wet Area Heat Cable

Cmc Type F Fvr 4-6.3a B-mmp B-cont 110/50 120/60

Category: Combination Manual Motor Controllers

Vinyl Insulated Flange Spade, 16-14 AWG, #8 Terminal Size, 300 Volt, Blue, 100 Per Pack

Category: Vinyl Insulated Standard Fork Terminals

Cmc Type F Fvr 20-25a B-mmp C-cont 24-27vdc

Category: Combination Manual Motor Controllers

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.

Category: Poke-Through Mounting Plates