"phj-9100a9blk formula systems north america inc"

CVJ 1412 W/ CLEAR FRONT / NON-METALLIC HINGE / 2 PL LATCHES

ENG CVJ606HWPL1 CVJ 606 W/ CLEAR FRONT / HINGE / 1 PL LATCH

RVJ 1210 W/ RAISED COVER / NON-METALLIC HINGE / 2 PL LATCHES

VJ enclosures feature raised overlapping cover that offers increased internal space for components. This RVJ Raised Opaque Cover Type 4X, RVJ2016W item measures 21.32x17.32x11.57 with a material Fiberglass color Lt Gray.

Concept stainless steel enclosure for indoor/outdoor use with 3pt latching and disconnect mounting. This Concept Wallmount Disconnect Enclosure 3Pt Latch, CDSC302610SS6 item measures 30x26x10 inch with a material of SS316 finish Brushed.

4 Hole Offset Lug, 6" x 3" x 0.25", 0.563" Hole

Copper Ground Plate, Bare, 24" x 24", No Pigtail, 1/4"

Function as copper conductors, but appear to be non-copper conductors and are difficult to cut and steal. It is 157-stranded,  has an OD of .572".  It is also 200' (61m) long.

CAD LPC34012 BASE CU CAST STE

VM 775 W/ OPAQUE COVER

Hubbell Wiring Device Kellems, In-Floor Delivery Systems, Fire RatedPokeThroughs, SystemOne, 6" Series, Cover Assembly, Black

Category: Poke-Through Cover Assemblies

Self-Adhesive Mat System, Heated Floor Mat, Heated Area: 81 - 94 Square Feet, 120 Volt

Category: 120V Floor Warming Mats

The EL3100 is a self-powered ground-fault and phase voltage indication system for 3-phase systems.

Category: Starter & Contactor Ground Fault Sensors

Plasti-Bond OE Series Conduit Outlet Boxes are installed in hazardous location conduit systems to serve as pulling and splicing fittings, to connect runs of conduit, to change the direction of a conduit run, or to provide access to conductors. They are provided with covers. Electrical continuity of the conduit system is maintained across assembled joints."

Category: PVC Coated Type T Conduit Bodies

OLS75 power supply/charger converts a 115VAC, 50/60Hz or 230VAC, 50/60Hz input into a 12VDC or 24VDC output @ 2.5 amp continuous supply current (see specifications). This unit has a wide range of applications for access control and security system accessories that require additional power. Input: Universal input 115VAC, 50/60Hz, 0.95 amp. or 230VAC, 50/60Hz, 0.6 amp. Output: 12VDC or 24VDC selectable output. 2.5 amp continuous supply current. Filtered and electronically regulated output. Short circuit and thermal overload protection. Battery Backup: Built-in charger for sealed lead acid or gel type batteries. Automatic switch over to stand-by battery when AC fails. Maximum charge current 0.5 amp. Supervision: AC fail supervision (form "C" contacts). Low battery supervision (form "C" contacts). Visual Indicators: AC input and DC output LED indicators. Electrical: Operating temperature: -20° C to 49° C ambient. BTU/Hr.: - 12VDC: 15.35 BTU/Hr. - 24VDC: 30.7 BTU/Hr. System AC input VA requirement: - 115VAC: 109.25VA. - 230VAC: 138VA. Features: Power ON/OFF switch. Includes battery leads. Dimensions (approximate): 4.125"W x 7.5"L x 2.125"H (104.775mm W x 190.5mm L x 53.975mm H) Weights (approximate): Product Weight: 1.55 Lbs (0.7 kg) Shipping Weight: 1.75 Lbs (0.79 kg)

Category: CCTV & Video Surveillance 12V DC Power Supplies

All communication device accepts up to eight UTP, fiber optic, audio, or video connectors. Finish with a brushed brass and a black device plate. Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Anodized Aluminum

Category: Assembled Poke-Through Units

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LB Conduit Bodies

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LL Conduit Bodies

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LL Conduit Bodies

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

1/3 insert with 9-pin female to female coupler, white.

Category: Multimedia Outlet System Wallplate Inserts

Plasti-Bond PVC coated strut is a versatile system of structural elements that can be used to build supports for a variety of applications. When combined with coated conduit hangers and other accessories, coated strut is a versatile and economical way to provide reliable support for conduit runs and other electrical and mechanical installations.

Category: PVC Coated Solid Strut

600V Power Distribution System

Category: Compact Circuit Protectors

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies