"it-4"

NSI L414P #4 AWG MAX WIRE SIZ

Heavy Duty 1 Cable Parallel Ground Connector for 1/2-3/4in 2/0-4 AWG. Pipe Made of high-copper-content alloy for grounding to 1/2" - 1" ground rods and ground pipes from 1/4" - 3 1/2" in parallel or 90 degree position. Suitable for direct burial in earth and concrete. Nuts and lockwashers are silicon bronze.

NSI HWHS6-40-6 6-4/0 AWG HEAV

Category: Heavy Wall Heat Shrink

12 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

TORK 5441A 4 CONTACTORS 40AM

Category: Time Switch Enclosures

1 Port Aluminum Lug 500 MCM - 4 AWG Aluminum Single Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Temperature Rating 90 degrees C. Rated 600 volts (2000V max. per UL486B). UL 486A/B Listed. .

Category: 1-Conductor Aluminum Mechanical Lugs

NSI CAL40-48 4/0 STR CAST ALU

Category: 1-Hole Copper Compression Lugs

Ring Terminal, Nylon Insulated, 12 - 10 AWG, Stud Size: 1/4, Color: Yellow, Package of 50 Each.

Category: Nylon Insulated Ring Tongues

Heavy Duty Copper C Tap Grounding Connector for 350 MCM to 4/0 AWG APPLICATIONS: Copper "C" Taps ensure positive, all-around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

Standard Duty Silicon Bronze Ground Rod Clamp for 3/4 Inch Rod Standard Duty Ground Rod Clamps are made from silicon bronze with 304 stainless steel screws for maximum strength. cULus Listed 467 Grounding and Bonding.

Category: Ground Rod Ground Clamps

Copper Terminal Lug 4 - 14 AWG Copper Terminal Lugs are made of high copper alloy. They are used for joining a wide range of cables or terminal blocks.

Category: 1-Conductor Copper Mechanical Lugs

Electronic 2/4/8/12 Hour Wall Switch Timer, 15 Amp, 120 Volt, SPST, White

Category: In-Wall Preset Time Switches

Insulated Multi-Cable Stacked Connector Block, Wire Entry Either Side, 600V, Number of Ports: 6, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 12, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Ground Clamp With Lay-in Lug, Heavy Duty, 1-1/4 to 2 Inch Diameter, Bronze With Steel Hardware, Suitable for Direct Burial

Category: Bare Wire Ground Clamps

1 Hole Long Barrel Copper Compression Lug 4 AWG - 3/8" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .

Category: 1-Hole Long Barrel Copper Compression Lugs

NSI L4N-141P #4 AWG MAX WIRE

NSI L4N-14P #4 AWG MAX WIRE S

Heavy Duty Bronze Ground Clamp with Wire Adapters for 2.5-4 in. Pipe Heavy Duty Bronze Adapters have serrations that match the serrations on the ground clamp, assuring positive lock. All adapters fit all clamps for the ultimate in flexibility. Zinc plated steel hardware. Used to connect grounding conductor to rigid conduit on water pipe. UL Listed 467 Grounding and Bonding.

Category: Ground Clamps With Hub

NSI L4N-38 4 AWG CU COMPRESSI

Category: 2-Hole Long Barrel Copper Compression Lugs

NSI CTH-44 COPPER C TAP 6 SOL

Category: C-Tap Press-On Lugs

Ring Terminal, Nylon Insulated, 16 - 14 AWG, Stud Size: 1/4, Color: Blue, Package of 100 Each.

Category: Nylon Insulated Ring Tongues

GROUND CLAMP 1 1/4-2IN DB RATED

Category: Bare Wire Ground Clamps

Nsi 4tc 4-14 Cu Lug

Category: 1-Conductor Copper Mechanical Lugs