"pto-250 industries, llc"

Vinyl Insulated Male Disconnect, 12-10 AWG, 300 Volt, Yellow, 50 Piece Pro Pack

Category: Male Vinyl Insulated Wire Disconnects

Winged Wire Connector, Grey, Easy Twist, 18-8 AWG, Bag of 250

Category: Color Coded Twist On Wire Connectors

NSI HWHS1500-2500-12 1500-250

Category: Heavy Wall Heat Shrink

NSIIPLDS-750-6

Category: Dual Sided Entry Wire Connector Blocks

12 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

insulation Piercing Connector 250-1 Main, 4/0-4 Tap

Category: Splices - Insulation Piercing

Nsi Pt400 Pin Terminal 400 Str Cu Pin 250 Pink

Category: Copper Pigtail Adapters

Nylon Insulated Male Disconnect, 22-18 AWG, 600 Volt, Red, 100/Pack

Category: Male Nylon Insulated Wire Disconnects

12 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Heavy Duty Copper C Tap Grounding Connector for 350 MCM to 4/0 AWG APPLICATIONS: Copper "C" Taps ensure positive, all-around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

Non-Insulated Male Disconnect, 12-10 AWG, 600 Volt, Silver, Tin Plated Copper, 50/Pack

Category: Male Non-Insulated Wire Disconnects

16-14 AWG Nylon Insulated Male Disc., 100/Pack

Category: Male Nylon Insulated Wire Disconnects

ON OFF ON - SPDT - Large Nickel .250 QuikConnect Bat Toggle Switch

Category: 1-Pole Toggle Switches

NSI IPLMD2505 NSIIPLMD2505

Category: Dual Sided Entry Wire Connector Blocks

10 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

NSI 250SR ALUMINUM SPLICER RE

Category: Aluminum Splice Reducing Lugs

2-Port Clear Multi-Tap Pre-Insulated Connector, 250 MCM – 6 AWG

Category: Dual Sided Entry Wire Connector Blocks

Compression Lug, 600 - 250 MCM, 2 Hole, 1/2 Inch Stud Size, Aluminum, Dual Rated CU/AL

Category: 2-Hole Aluminum Compression Lugs

Heavy Duty Copper C Tap Grounding Connector for 300 MCM to 2/0 AWG APPLICATIONS: Copper "C" Taps ensure positive, all-around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

.500/ .250 Easy-Splice Thin Wall Tubing 48" - 1 Count Flexible flame-retardant, thin wall, general purpose heat shrinkable polyolefin tubing has a 2:1 shrink ratio. Used for electrical insulation, wire harness bundling, wire jacket marking and color coding, it also splices and makes functional terminations. Available in black, white, red, green, blue and clear. Standard packaging is either 6" lengths in blister boxes or in economical 25' spools. UL recognized to Standard 224. Black, white and colored thin wall tubing meet MIL-DTL-23053/5, Class 1. Clear meets MIL-DTL-23053/5, Class 2 and is not flame retardant. Rated 600 Volts, 125 C.

Category: Thin Wall Heat Shrink

12-10 AWG Nylon Insulated, 50/Pack

Category: Wire Disconnect Adapters

Easy-Splice Direct Burial Splice Kit with Rubber Cover 250 - 750 MCM Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Direct Burial Datacom Splice Kits

Thin Wall Heat Shrink Kit Assortment: 25Pc - 125 x 6", 25Pc - 187 x 6", 20Pc - 250 x 6", 12Pc - 375 x 6", 7Pc - 500 x 6", 5Pc - 750 x 6", 600V

Category: Heat Shrink Kits

ON OFF - SPST - Nickel .250 QuikConnect BatToggle Switch

Category: 1-Pole Toggle Switches