"it-4"

Lighting Control Panel, 365 Day, SPDT, 4 Channel, 120-277 Volt, Metal Indoor/Outdoor NEMA 3 Enclosure with Locking Hasp

Category: 365 Day Digital Time Switches

Copper Compression Lug, Conductor Size: 4/0 AWG, 1-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 1-Hole Long Barrel Copper Compression Lugs

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 5, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

Copper Multiple Connector 4-14 AWG 8 Hole Copper multiple connectors are made copper and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper wire only.

Category: Non-Insulated Multi-Tap Connectors

Dual Range Lug One 600 MCM - 4 AWG, Two 250 MCM - 1/0 AWG - 1 Count Dual Range Lugs are set screw connectors that will accept either one or two wires. Made of 6061T-6 aluminum alloy. Electro-pin plated for low contact resistance. For use with copper or aluminum conductors. Rated 600 Volts (2000V max. per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C.

Category: 1-Conductor Aluminum Mechanical Lugs

Ring Terminal, Nylon Insulated, 4 AWG, Stud Size: 1/2, Color: Yellow, Package of 15 Each.

Category: Nylon Insulated Ring Tongues

Compression Lug, Aluminum, 4/0 AWG, 2 Hole, 1/2" Bolt Size, 1-3/4" Hole Spacing

Category: 2-Hole Aluminum Compression Lugs

NSI EWG-7060-9 GENERAL PURPOSE *** Discontinued ***

Category: Color Coding Tape

Nsi 4-800ll4 800-300 Mcm 4 Hole 8 Screw Mounting Hole 1 3/4 Center To Center

Category: 3-Conductor Aluminum Mechanical Lugs

1 Hole Long Barrel Copper Compression Lug 4 AWG - 1/4" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .

Category: 1-Hole Long Barrel Copper Compression Lugs

Insulated Multi-Tap Connector, Dual Entry, 10 Port, 4 AWG - 500 MCM, Aluminum Alloy with Plastisol Insulation, Black

Category: Dual Sided Entry Wire Connector Blocks

Nylon Insulated Ring Terminal, 4 AWG, 5/16? Stud, 15 per Pack

Category: Nylon Insulated Ring Tongues

NSI S22-4 22-18 AWG BARE SPAD

Category: Non-Insulated Locking Fork Terminals

NSI 4-14-818 MUST HAVE

Insulated Multi-Cable Stacked Connector Block, Wire Entry Either Side, 600V, Number of Ports: 8, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Professional Vinyl Electrical Tape, 3/4 Inch x 60 Feet, Yellow, Flame-Retardant, UV Resistant

Category: Color Coding Tape

Copper Lay-in Lug with stainless steel screws for grounding or in continuous loop bonding. UL Listed for direct burial in earth or concrete with copper wire, 4-14AWG.

Category: 1-Conductor Bronze Mechanical Lugs

NSI 4-1000L4 NEMA PANELBOARD

Category: Aluminum Panelboard Lugs

Aluminum Ground Clamps for 2.5-4in. Pipe Dual-rated ground clamp that ground aluminum or copper to water pipe, galvanized pipe or steel conduit. They are constructed from high-strength extruded aluminum alloy and are plated to provide low-contract resistance. cULus Listed 467 Grounding and Bonding. Zinc plated steel screws.

Category: Bare Wire Ground Clamps

NSI VM-B-4 VOLTAGE MARKERS 20

Category: Voltage Markers

4 Wire Polaris 250 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Nsi Wmc-4 Wire Marker

NSI S-4 60-70 AMP CU SOLDERIN

NSI EC-4 SERVICE CONNECTOR

Category: Copper Service Entrance Lugs