"57-469/s/bl"

SOG 16-03-02-57 STOUT SJ / BL

Snap-In Connector, Cat 5e, Color: Blue.

Category: Snap-In Cat 5e Jack Inserts

WAG 750-469/003-000 THERMOCOU

Milwaukee; Cutter; Hole Saw; Hole Diameter: 1-3/4 In; Cutting Size: 3/16 In Depth

Category: Carbide Tipped Hole Saws

Milwaukee; Cutter; Hole Saw; Hole Diameter: 2-1/2 In; Cutting Size: 3/16 In Depth

Category: Carbide Tipped Hole Saws

Step-Down Jumper; Insulated; From 16/10 Mm² To 10/6/4/2.5 Mm²; Nominal Current: 57 Amps; Light Gray

Category: Terminal Block Jumper Bars

For materials up to 3/16ö, these carbide tipped sheet metal Hole Saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the carbide. Milwaukee recommends the use of Hawg Wash« cutting fluid for best results. Hawg Wash« fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 inch diameter. Bullets: 7/8 in. bit diameter For use with quick change arbor 49-57-0035 3/16 in. cutting depth 05547

Category: Carbide Tipped Hole Saws

Milwaukee; Hole Saw Cutter; Hole Diameter: 1-3/8 In; Cutting Size: 3/16 In Depth

Category: Carbide Tipped Hole Saws

Milwaukee; Hole Saw Cutter; Hole Diameter: 1-1/8 In; Cutting Size: 3/16 In Depth

Category: Carbide Tipped Hole Saws

2 Ft. x 4 Ft. LED Flat Panel TAA certified (Trade Agreement Approved). Installed as a New Fixture. Selectable Wattage 30/40/50W and CCT 3500/4000K/5000K. Lumens 3900/5200/6500. Sensor ready; stand alone or networked lighting controls. 5 Year Warranty. DLC Code: S-N155V0

Category: LED - Flat Panels

Cat 5E Sdj-Series Keystone Jack Blue Single

Category: Snap-In Cat 5e Jack Inserts

Electrical Color Coding Tape, Vinyl, 3/4 Inch x 66 Foot Length, 7 mm Thickness, 600 Volt, Temperature Rating: 221°F, Blue

Category: Color Coding Tape

Desk Console, NEMA 12, Top: Quarter Turn Latches, Front: Handle Latch, 25 Degree Sloped Top, 1175 mm x 946 mm x 469 mm, Steel/Gray Powder Coat

Category: Industrial Desk Consoles

Refill Cartridge, Vinyl Tape, Dimensions: 0.75" x 21', Color: White on Blue, Compatible With: Brady BMP 21 Mobile Printer, ID PAL, LABPAL Label Printer Labels

Category: Permanent Tapes

Conduit Piston, Diameter: 1-1/4". *Dottie Part # 32036*.

Category: Conduit Pistons

15 Amp, 120/277 Volt, Decora Rocker Single-Pole AC Quiet Switch, Residential Grade, Grounding, Quickwire Push-In & Side Wired - White

Category: 15 Amp Residential Grade Decorator Switches

3-Gang, Screw-On, New/Old Work, Switch/Outlet Box, Non-Metallic, Depth: 3-1/4". Cubic Inches: 57".

Category: Non-Metallic New Work Switch / Outlet Boxes

Jumper, For 2010 Series, Insulated, 4-Way, Nominal Current: 57 Amps; Maximum Voltage: 800 Volts; Light Gray

Category: Terminal Block Jumper Bars

Jumper, For 2010 Series, Insulated, 2-Way, Nominal Current: 57 Amps; Maximum Voltage: 800 Volts; Light Gray

Category: Terminal Block Jumper Bars

Electrical label in dispenser, .75" W x .75" H, ground symbol (ISO 3864), polyester adhesive, green/white, 300 labels per package.

Category: Voltage Markers

40.0 - 57.0 Amp, IEC, Overload Relay, Type: Thermal Bi-Metallic. Trip Class 10. Selectable Manual or Automatic Reset. For use with XT Series, Frame D Contactors.

Category: Overload Relays - Thermal Type

Diva Fluorescent/LED Dimmer; 120-277V, 30mA, 0-10 VDC, Single-Pole/3-Way, Works w/ LED Drivers, Fluorescent Ballasts and HID Ballasts, Color: Black, Gloss Finish

Category: Decorator Fluorescent Dimmers

Assembled Jumper Bar without IP20 Protection. 10 Pole. 57 Amp. Type: BJM10. Used with 10 mm Blocks.

Category: Terminal Block Jumper Bars

Milwaukee; Cutter; Hole Saw; Hole Diameter: 2 In; Cutting Size: 3/16 In Depth

Category: Carbide Tipped Hole Saws