Search results

Wiring Duct, Type G, Wide Slot, 1/2 Inch Wide x 1 Inch Deep x 6 Foot Long, PVC, Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

End Cap Fitting / T-45 Series Raceway, Off-White

Category: 2-Piece Non-Metallic Raceway End Fittings

Coupler Fitting For Use With LD3, LDPH3, And LDS3 Raceway

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Cable Tie w/ Metal Barb, Nylon, Light-Heavy Cross Section, Natural Color, 14.9 Inch Long, .275 Inch Wide, 4" Maximum Bundle Diameter, 120 Pound Minimum Loop Tensile Strength, Pack of 50

Category: Non-Releasable Cable Ties

Insulated Ferrule, 14 AWG, 0.31 Inch Pin Length, Yellow, Copper, Package of 500 Each

Category: Single Insulated Ferrules

NetKey® Category 6 UTP Patch Cord with Tangle-Free Latch, Off-White, 14 Foot Length, 24 AWG

Category: Category 6 Patch Cords

Female Disconnect, Nylon Fully Insulated, 16 to 14 AWG, .25 Inch x .032 Inch Tab, Blue, Package of 1000 Each.

Category: Female Nylon Insulated Wire Disconnects

Panduct® Type G Wide Slot Wiring Duct, 1.75" W x 4.10" H x 6' L, Lead Free PVC, White, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

DIN Rail Mount Adapter, 1 Port, Mounts to Standard 35mm DIN Rail, International Gray, Includes Label and Label Cover

Category: Snap-In Fiber-Optic Jack Inserts

Pan-Ty® Cable Tie, Extra-Heavy Duty, UV Resistant, Black, PA6.6, 20.1" Long, 250lb, PK100

Category: Non-Releasable Cable Ties

Strain Relief Bar, 5" Depth

Category: Patch Panel Accessories

Heat Shrink, Thin Wall, Flexible Polyolefin Tubing, 600V, Color: Black, Shrink Ratio: 2:1, Size: 1", Expanded Insulation Diameter: 1/8", Recovered Insulation Diameter: 1/8", Tube Length: 6 Inch Piece. Provides: Flame, Moisture and Abrasion Protection in Stain Relief and Wire Bundling Applications.

Category: Thin Wall Heat Shrink

Female Disconnect, 12 - 10 AWG, .250" x .032" Tab, Pack of 500

Category: Female Non-Insulated Wire Disconnects

Panduct® Type G Wide Slot Wiring Duct, 2 W x 1 H, 6' Length, PVC, Light Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

NetKey® Faceplate, Label Pocket, 1-Gang, 1-Port, Off White

Category: Snap-In Wallplates

Outside Corner Fitting For Use With LDPH5 And LDS5 Raceway

Category: 1-Piece Non-Metallic Raceway Elbows

The low profile cable tie mount in natural color is applied with a #8 (M4) screw. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniature, intermediate, and standard cable ties.

Category: Cable Tie Bases

Wallplate, Vertical, with Labels, 1-Gang, 4-Port, Box Mount, NetKey, Ivory

Category: Keystone Wallplates

Punchdown Jack Module, CAT5e, 8-Position, Red, Component-Rated, NetKey, Keystone

Category: Snap-In Cat 5e Jack Inserts

Cable Tie w/ Metal Barb, Nylon, Intermediate Cross Section, Natural Color, 6.1 Inch Long, .141 Inch Wide, 1.5" Maximum Bundle Diameter, 40 Pound Minimum Loop Tensile Strength, Pack of 100

Category: Non-Releasable Cable Ties

Raceway Base, T-70 Series, 4.07" x 1.77" x 10', Off White, Tamper Resistant

Category: 2-Piece Non-Metallic Raceway

48-port, Category 6A, 10 Gb/s patch panel with 48 RJ45 8-position, 8-wire ports, Black.

Category: Category 6A Patch Panels

HD Flex Enclosure, 4 Rack Units, 6 Ports, Black

Category: Rack Mount Data, Audio, & Video Enclosures

Single gang two-piece screw together extension outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 4.99"L x 3.30"W x 1.00"H (126.7mm x 83.8mm x 25.4mm). Breakouts for 1/2", 3/4", or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes