Covers, Flanges & Adapters

Flangeless cover for use in tile installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. Finish - Aluminum

Category: Square / Rectangle Recessed Box Covers

Traditional Floor Cover For Use With Leviton 5" Poke Through Floor Box (PT500) Only, Accommodates All Standard Duplex Receptacles, The Flip Lids Are A Double-Hinge Design That Can Open 180 Degrees And Lay Flat, Also Includes Metal Subplate And Pre-Assembled Gasket And Mounting Screws, And Cover Mounting Screws, Nickel

Category: Round Recessed Box Covers

Cover Plate, Powder-Coated Aluminum, 3/4" Plugs, Color: Nickel

Category: Square / Rectangle Recessed Box Covers

Duplex Power Plate with Flip Lids, Color: Brass

Category: Round Recessed Box Covers

Available in black (BK), gray (GY), painted brass (BS), and ivory (VY). NOTE: To abandon the RC4 Series Poke-Thru Device, the internal gasket, duplex receptacle, and communication modules must not be removed in order to maintain UL Classification. Also the stem must remain in the hole. Black

Category: Round Recessed Box Covers

Polycarbonate communications or power cover plate. Includes one plug with 3/4" (19mm) opening, one plug with 1" (25mm) opening, and one plug with 2 5/8" (67mm) opening. For pass-through only. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Black

Category: Round Recessed Box Covers

Two Gang Rectangular Floor Box Cover, Width 7.13 Inches x Length 8.25 Inches, Stainless Steel

Category: Square / Rectangle Recessed Box Covers

5-1/2" Round Cover, Non-Metallic, Cover Type: Two Door/Dual Service. Device Type: Duplex Receptacle. Color: Aluminum.

Category: Round Recessed Box Covers

Cover Kit With Two Receptacles, 5-1/2 Inch Diameter, Antique Bronze, Steel Flange With Zinc Plated Cover

Category: Round Recessed Box Covers

ALL FB-3DBCVR ROUND DPL DRK B

Category: Round Recessed Box Covers

Combination Carpet and Tile Flange, 3-Gang, Powder-Coated Aluminum, Nickel

Category: Square / Rectangle Recessed Box Flanges

AI FLBT6615MB BRS POP-UP CVR W/RECPT

Category: Round Recessed Box Covers

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA.

Category: Square / Rectangle Recessed Box Covers

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Nickel

Category: Square / Rectangle Recessed Box Covers

Combination Carpet and Tile Flange, 1-Gang, Powder-Coated Aluminum, Nickel

Category: Square / Rectangle Recessed Box Flanges

Two-gang powder-coated aluminum combination carpet and tile flange, 6" x 9" (152.4mm x 228.6mm). Accepts Ortronics MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series Open System inserts, sold separately. NOTE: UL Listed for tile, terrazzo, and carpet floors. Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Bronze

Category: Square / Rectangle Recessed Box Flanges

GFI Cover Plate, 3-1/4 x 4-5/32 Inch, Flip Lid, Aluminum/Bronze Powder-Coat

Category: Square / Rectangle Recessed Box Covers

Combination Carpet and Tile Flange, 3-Gang, Powder-Coated Aluminum, Black

Category: Square / Rectangle Recessed Box Flanges

"Door-In-Door" Cover For Use With Leviton 5" Poke Through Floor Box (PT500) Only, Includes 2 Flip Lids That Fold Into The Main Lid To Hide All Hinges And Doors While In Use, Comes With Pre-Wired, Modular, 20A Receptacles and 4 QuickPort inserts, Also Includes Pre-Assembled Gasket And Mounting Screws, Gray

Category: Round Recessed Box Covers

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Furniture Feed Cover For Use With Leviton 5” Poke Through Floor Box (PT500) Only, Includes 2 Screw Caps, 1 Large Cap For Accommodating Data (1.5" Diameter Cap), And 1 Cap For Accommodating Power (0.75" Diameter Cap), Also Includes Pre-Assembled Gasket And Mounting Screws, Black

Category: Round Recessed Box Covers

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Finish - Gray

Category: Square / Rectangle Recessed Box Covers

Flangeless Blank Cover Assembly, No Cut-Out, Color: Nickel, Material: Die-Cast Aluminum

Category: Square / Rectangle Recessed Box Covers

ALL FB-6DBCVR RCT DEC DRK BRN

Category: Square / Rectangle Recessed Box Covers