Search results

Plasti-Bond PVC coated strut nuts are used to assemble strut components and to secure coated all thread rod in a section of strut. These are available with or without a spring to aid in placement and assembly.

Category: PVC Coated Beam Clamps

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PBC149-1/2 1/2 PIPE STRAP

Category: PVC Coated Conduit Support Straps

ROB PRUNY905SA 3-1/2 FEM-MALE UNION AL

Category: PVC Coated Female-Male Unions

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRNIP-AL-2-1/2X12 2-1/2X12 AL NIPPLE

Category: PVC Coated Nipples

ROB PR5233GRAL 3/4 STRAIGHT LT CONN W/GRN AL

Category: Straight PVC Coated Type LT Connectors

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PREYD56 1-1/2 M/F SEALING FITTING W/DRN

Category: PVC Coated Type EYD Sealing Fittings

ROB PRNIP-AL-1X6 1X6 AL NIPPLE

Category: PVC Coated Nipples

ROB PRNIP-AL-2X4 2X4 AL NIPPLE

Category: PVC Coated Nipples

Plasti-Bond reducing couplings are used to connect two pieces of conduit of different size. They are available in 17 different size combinations."

Category: PVC Coated Couplings

PVC coated Mark 9 conduit bodies covers are offered separately for convenient maintenance or installation when the replacement of entire bodies are not necessary.

Category: PVC Coated Conduit Body Covers

ROB PBU-BOLT-2-1/2 2-1/2 COATED STEEL U-BOLT

Category: PVC Coated Conduit Support Straps

Plasti-Bond LBY type elbows are used as service entrance elbows between service entrance and vertical weatherhead conduit runs, to change direction of a conduit run 90degree when space is limited, and for pull outlets. They are available for general service (Series LBY-50-GS through LBY-150-GS) and hazardous (Series LBY-50 through LBY-55) locations.

Category: PVC Coated Type LB Conduit Bodies

ROB PRREC43SA 1-1/4 - 1 AL REDUCING COUPLING

Category: PVC Coated Couplings

ROB PRHNIP-1-1/2X2-1/2 1-1/2X2-1/2 NIPPLE

Category: PVC Coated Nipples

ROB PRC889 3 AL MARK 9 C FITTING

Category: PVC Coated Type C Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PREYD8SA 3 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

Rob-r Prlbd3300 1 Pulling Elb

Category: PVC Coated Type LB Conduit Bodies

Rry Pbpar11/2 11/2" Parl Clmp

Category: PVC Coated Parallel Beam Clamps

Rry Pbpar2 2" Parl Clamp

Category: PVC Coated Parallel Beam Clamps