"ab-6636swg the austin co."

3M™ Scotchlok™ 40100 2 Hole Compression Lug is suitable for use with copper or aluminum conductors. The lug has a standard barrel that ensures a secure fit. Aluminum construction offers high conductivity and an electro tin plated finish resists corrosion. It is rated for 35 kV voltage applications.

Category: 2-Hole Aluminum Compression Lugs

Circ-a-w R1123hdd 600a 4w Bus way, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

The PKB Platinum Electronic Portable Utility Heater, 208V, 15 kW, 51.2 BTUH, 36.1 Amps, 3 Phase

Category: Portable Unit Heaters

Eaton resi meter breaker, Meter mains, 200A, C, Aluminum, NEMA 3R, Bottom and top, Provisions, Surface mounting, Five-jaw, 1, Single-phase, Ringless, 120/240 Vac, Horn bypass, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

C-H UATH7213UFLCH METER SOCKE, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

Eaton meter socket, Comm, 320A, Over/under, 5x5 inch hub open, 3/8 inch stud, 5-jaw, 3-ph, 3/8 inch stud, Anti-inver clip factory installed, Lever bypass, Gnd conn (#14-#2 Cu), Triplex, 3-wire, Ringless, 600 Vac, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

The 4-way adhesive backed cable tie mount in black is mounted with rubber adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of ABS plastic. It is used with miniature, intermediate, and standard cable ties. It is designed for indoor environm

Category: Cable Tie Bases

The 4-way adhesive backed cable tie mount in black is mounted with acrylic adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of weather-resistant ABS plastic. It is used with miniature, intermediate, and standard cable ties. It is designed

Category: Cable Tie Bases

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Weather Resistant Nylon 6.6 mate

Category: Non-Releasable Cable Ties

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Weather Resistant Nylon 6.6 mate

Category: Non-Releasable Cable Ties

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in red premium nylon housing. It has a tab size of 0.187 x 0.020" (4.8 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.78" (19.8 mm

Category: Female Nylon Insulated Wire Disconnects

The HD Flex 12-position Trunk Transition Clip comes in a quantity of 2 and is black.

Category: Rack Mount Data, Audio, & Video Enclosures

The Panduit Bend Radius Control Clip Kit manages and protects cables as they transition from patch panels, creating a safe and accessible pathway with proper bend radius control. 1 RU, 5.0in deep (129mm), 2pc.

Category: Rack Cable Management Devices

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Weather Resistant Nylon 6.6 mate

Category: Non-Releasable Cable Ties

The vibration resistant DiscoGrip™ male disconnect is made of brass and is nickel-plated. It is fully insulated in blue premium nylon oversized housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²

Category: Male Nylon Insulated Wire Disconnects

Plasti-Bond pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond PVC coated beam clamps are used to securely support conduit runs by attaching them to beams, angles, trusses and other structural members. Parallel : to attach the conduit run parallel to a beam or structural member.

Category: PVC Coated Parallel Beam Clamps

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 304 AISI stainless steel with a fold-over lock, it is ideal for indoor and outdoor conditions. Low-profile buckle, 31"L (787mm), 0.5"W (13mm), Tensile Strength: 297

Category: Non-Releasable Cable Ties

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in a red, nylon housing. It has a tab size of 0.110 x 0.032" (2.8 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.71" (18.0 mm) lo

Category: Female Nylon Insulated Wire Disconnects

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in red vinyl housing. It has a tab size of 0.187 x 0.02" (4.8 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.77" (19.6 mm) long a

Category: Female Vinyl Insulated Wire Disconnects

The vibration resistant male tab disconnect is made of copper and is nickel-plated. It is fully insulated in a yellow, nylon housing. It has a tab size of 0.250 x 0.032"" (6.3 x 0.8 mm) and supports a wire range of 12-10 AWG (4.0-6.0 mm²). It is 0.96" (24

Category: Male Nylon Insulated Wire Disconnects

Easy-Mark Plus Labeling Software - CD-ROM, Quickly Generate Labels With New And Improved Easy-Mark Plus™ Labeling Software, That Is Now Even More Powerful, Advanced Features Such As `Drag and Drop’ Functionality And Wizard Tools Help You Create Customized Labels To Suit Your Specific Needs, Current Easy-Mark™ Software Users Can Still Rely On The Features You Already Like Such As WYSIWYG (What You See Is What You Get) User Interface, Data Import, Symbol Import, And Pre-Loaded Label Formats

Category: Labeling Software

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 316 AISI stainless steel with a fold-over lock, it is ideal for severe weather, intense UV rays, high vibration and galvanic corrosion. Low-profile buckle, 12"L (30

Category: Non-Releasable Cable Ties

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Black, 2 meters.

Category: Category 6 Patch Cords