"end caps"

Entrance End Fitting, DS4000 Series, Black

Category: Large 2-Piece Metallic Raceway End Fittings

WMD AD3WP-PW EX CAP FPC WP, P

WMD 1002368 MUD CAP FOR 880MP

WMD AD3WP-NK EXTRA-CAP WALL P

EX CAP FPC WP WHITE ON WHITE

WMD AD3WP-MG EXTRA-CAP WALL P

WMD AD3WP-LA EX CAP FPC WP, S

Steel, Blank End Fitting, DS4000 Series, Knockouts: (2) 3/4", 1". Black.

Category: Large 2-Piece Metallic Raceway End Fittings

WMD AD3WP-GG EX CAP FPC WP, G

Two-compartment large capacity pole. Furnished unwired without outlets. Box ended with industry sized knockouts. Standard heights: 10' 2" (3.1m) (NP800C-10-2B), 12' 8" 3.9m) (NP800C-12-8B), 15' 2" (4.6m) (NP800C-15-2B) Finish - Anodized Aluminum

Category: Aluminum Power Poles

W-mold G20-c2 Cord-ended Plug mold

Category: Single Circuit Steel Plugmold

For mounting up to three power or communication devices at one location inline and offset with 5400 Series Raceway. For use with 5507 Series Faceplates, Ortronics TracJack and Series II Modules, Pass and Seymour Activate Series Inserts, Wiremold Open System Communication Modules. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules. S2-EPL End Plates are required when using Orthonics Series II Inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 3-Gang Raceway Device Brackets & Plates

For mounting up to four power and communication devices at one location. Utilizes 5507 Series Faceplates, Wiremold Open System communication modules, Ortronics TracJack and Series II inserts, and Pass and Seymour Activate Series inserts. For faceplate options, see 5507 Series Faceplates. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Ortronics Series II inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: Small 2-Piece Metallic Raceway Connectors & Adapters

For closing open end of DS4000B Raceway Base. Has two 3/4" and 1" trade size KOs. Designer Gray

Category: Large 2-Piece Metallic Raceway End Fittings

Entrance End Fitting, DS4000 Series, Gray

Category: Large 2-Piece Metallic Raceway End Fittings

MudCap, For Use With RFB9/11 Series Floor Boxes, Metallic

Category: Recessed Floor Box Service Fittings

Available in 5' (1.5m) length with 9" spacing. 15A tamper-resistant receptacles. 3-wire, #12 THHN (1 hot, 1 neutral and insulated ground conductor). .040" (1.0 mm) steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. USB is 2.4 Amps (shared between two ports) 5VDC. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product. Black

Category: Single Circuit Tamper Proof Plugmold

Two-compartment Pole. Nominal Material Thickness .040" (1.0mm). White Boot Base.furnished Unwired Without Outlets. Mounting Hardware, Entrance End Plate And Ceiling Trim Plates Furnished. Length: 12' 5" (3.8m). Rs Adapt To Yourcurrent Or Future Work Environments..

Category: Steel Power Poles

Accessory pack for 30TP-2V and 30TP-4V Series poles. Includes two ceiling trim plates, hanger clamp assembly, feed end fitting, and floor mounting assembly. One Accessory Pack supplied with each Tele-Power pole at no extra charge. Boots are not offered in accessory packs.

Category: Power Pole Covers

Two-compartment pole. Nominal material thickness .050'' (1.8mm). Length: 15' 5'' (4.7m). Furnished unwired without outlets. Two 8'' (203mm) removable covers with KOs for modular jacks and modular furniture communication outlets. Mounting hardware, entrance end plate and ceiling trim plates

Category: Aluminum Power Poles

Two-compartment Pole. Nominal Material Thickness .040" (1.0mm). Gray Boot Base.furnished Unwired Without Outlets. Mounting Hardware, Entrance End Plate And Ceiling Trim Plates Furnished. Length: 12' 5" (3.8m)

Category: Steel Power Poles

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. NOTE: Add suffix “TR" to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. "NA" indicates North American made and complies with the Buy American Act, NAFTA, and ARRA requirements.

Category: Square / Rectangle Recessed Box Covers

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling. NOTE: Add suffix ôTRö to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Aluminum

Category: Square / Rectangle Recessed Box Covers

Power Pole, Two Compartment, Aluminum, (2) Duplex Receptacles, 20 Amp, 125 Volt, 2-1/4 In Wide, 2-5/16 In Deep, 15 Ft, 5 In Long, Satin Anodized Finish, Includes Entrance End Plate and Ceiling Trim Plate

Category: Aluminum Power Poles