"ln2060 use siemens indus"

Replacement In-Use Cover, 1-Gang, Vertical, White, Weatherproof, Non-Metallic, Color: White. For Use With In-Use Boxes.

Category: 1-Gang Metallic Weatherproof Box Covers

Channel Nut W/O spring, Thread Diameter: 1/4", Material: Steel, Finish: Electro-Galvanized. For Use with: PS 100, PS 150, PS 200, PS 210 and PS 300 Channel. *Can be used with PS 400, PS 500, PS 520 and PS 560 Channel.

Category: Strut Channel Nuts

Comfort Grip Gloves, Lining: Nylon, Size: Medium, Color: Gray, Application: General Use

Category: Dipped Gloves

Fifth Jaw Kit, Used With 1MP, 1MM, and 3MM Modular Metering Stacks. Bolted onto neutral in the 3, 6, or 9 o’clock position. Typically used on network metering systems (3-phase in/single-phase out) or when specified by utility company. ***Not for use as a replacement Jaw***

Category: Group Metering Fifth Jaw Kits

TYM MR420CW 1G WP EXTRA DTY R

Category: Recessed Weatherproof In-Use Boxes

Sunnata 6-Amp Accessory Switch, For Use with Sunnata LED+ Dimmers, White ***Not For Standalone Use - For Use As An Accessory On/Off Switch With The Sunnata LED+ Dimmer Only (STCL-153MH-xx, Sold Separately)***

Category: Universal Dimmers - Decorator

1-1/4", Snap-In Bushing, Non-Metallic, Package Quantity: 50. Re-useable, for use with Punched Panel Holes. *Dottie Part # 12130*

Category: Knockout Bushings

3/4" Strap, 1-Hole, Material: Zinc Plated Steel. For use with: EMT.

Category: Steel 1-Hole Conduit Straps

Single Gang Electrical Box For Use With Nonmetallic Sheathed Cable

Category: Non-Metallic New Work Switch / Outlet Boxes

Three Phase Commercial Inverter With RSD Multiple Input (Fuse-less) Configured to 10kW or 17.3kW at 208 Volt AC, 30kW or 40kW at 480 Volt AC, NEMA 3R, 31.800 x 12.500 x 11.800 Inch, To Be Used Exclusively with C651U Optimizers

Category: Commercial Solar Inverters

(2) 2 AWG, (1) 4 with (1) 6 AWG Ground, Quadplexed Type USE-2/RHH/RHW-2, Aluminum Conductor, 600V, Triple Rated.

Category: Quadruplex URD Direct Burial Wire

2-in-1 Penta/Hex Flip Socket With Adapter, Easy-To-Use Flip Feature Allows For Quick Changes Between Penta And Hex Socket Sizes, Includes Two Of The Most Common Socket Sizes (13/16-Inch Penta And 3/4-Inch Hex) In One Tool, 5-Point, 13/16-Inch Penta Socket Works With Security Bolts Commonly Used In Underground Distribution Work, 6-Point, 3/4-Inch Hex Socket Is Easier To Position, Deep Well Socket With 1/2-Inch Drive Works Great For Hardware Installation And Removal, 1/2 to 1/2-Inch Square Adapter Has A Black Manganese Phosphate Finish For Rust Resistance, Includes A Ball Detent That Helps, Prevent Unintentional Separation Of Adapter And Socket, Socket Engineered For Use With Impact Drivers Including Klein's 1/2-Inch Compact Impact Wrench (Cat. Nos. BAT20CW, BAT20CW1), Color Coded To Easily Identify The Size Of The Socket

Category: Sockets & Socket Sets

W-Style Crimping Die Die Type: W-O For use with Service Entrance Connectors, C-Taps, H-Taps, Overhead and Underground Connectors Require UAW Adapter when used w/ ECCXL Tools, and Requires CJD3, CJD3BG, or CJD30 Jaws when used w/ EK628L Tools

Category: Wire Crimping Dies, Adapters, & Blades

1-1/2", Snap-In Bushing, Non-Metallic, Package Quantity: 25. Re-useable, for use with Punched Panel Holes. *Dottie Part # 12140*

Category: Knockout Bushings

Replacement Blades And Bit For The Adjustable Hole Saw With Auto-Set Arms (Cat. No. 53710), The Adjustable Hole Saw With Auto-Set Arms Provides Smooth Cuts From 2 To 7-Inches (5.1 To 17.8 Cm) In Drywall And Ceiling Tile, Features Integrated Gears For Easy Blade Adjustment And Centered Pilot Bit, Replacement Kit Comes With 2 Blades, 1 Pilot Bit, 2 Hex Keys, 4 Washers, 2 End Screws And 1 Set Screw, Using The Large Hex Key, Remove And Replace End Screw, Washers, And Blade, Using The Small Hex Key, Remove And Replace Pilot Bit Set Screw And Pilot Bit, After Replacing, Ensure All Screws Are Fully Seated And Snug-Tight Before Using The Adjustable Hole Saw With Auto-Set Arms To Cut Drywall Or Ceiling Tile

Category: Hole Saw Adapters

For materials up to 3/16ö, these carbide tipped sheet metal Hole Saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the carbide. Milwaukee recommends the use of Hawg Wash« cutting fluid for best results. Hawg Wash« fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 inch diameter. Bullets: 7/8 in. bit diameter For use with quick change arbor 49-57-0035 3/16 in. cutting depth 05547

Category: Carbide Tipped Hole Saws

Square Splice Washer, Use With CE 30 and EZ BN 1/4 To Splice Any Two Sections of Wire Mesh Tray, Also Use For Fabricating Bends Turns and Tees Electro Zinc For Indoor Use

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Channel Safety End Cap, For Use With PS 200 Series Channel, Plastic

Category: Strut Channel Safety End Caps

Self-Leveling Red Laser Level Has An Easy-To-Read Bright Red Horizontal And Vertical Line With A Working Range Of 35 Feet (10.7 M), Projects Horizontal And Vertical Lines To Address Various Alignment Tasks, Compact And Lightweight Design Is Easy To Use In Tight Areas And To Store When Not In Use, High Precision Laser Project Clean Lines With Accuracy Of 3/16-Inch At 30 Feet (9.1 M); Auto Out-Of-Level Detection Flashes Lasers When No Longer Level, Magnetic Mounting Bracket Screws Into Integrated 1/4-Inch Tripod Mount, Over 18 Hours Of Runtime Provides Enough Laser Power To Ensure Extended All Day Use, Durable Overmold Design That Is Ip54 Rated Protects The Laser Level From Water And Dust

Category: Levels

Shielded 48 Port Unloaded Panel Flat, Use With Tks6A Keystone Jacks, 2Ru , 3.5X 19

Category: Unloaded Patch Panels

Indoor Decora 24-Hour Programmable Timer 120VAC, 60HZ, 1800W Incandescent/Halogen, 15A Resistive/Inductive, 5A LED, 1HP Motor, for single pole, 3-way or more locations when used with VP0SR remote switch. Astronomic clock, backlit LCD display, timer settings at a glance, green LED locator, neutral required, can be used to comply with California Title 24, Part 6, Residential Outdoor Control Device Requirements – White Faceplate Included

Category: In-Wall Programmable Time Switches

Modbox™ Components Easily Interconnect For A Customized Mobile Workstation, Multi-Hook Easily Attaches And Moves Onto Any System Side Rail With One-Handed Release For Added Convenience, Use Multi-Hooks To Secure And Quickly Access A Variety Of Items Such As Cords, Fish Tapes, Hard Hats, Jackets And More At The Jobsite, Versatile Two Pack Can Be Used Together, Separately, Or Inverted, Secure Larger Items Such As Fish Tapes By Placing Hooks Next To Each Other On The Rail, Wrap Extension Cords By Placing Multi-Hooks Separately On Side Rails; Can Be Used For Both Horizontal And Vertical Cord Wraps, Store Multi-Hooks Inside The Rolling Toolbox And Medium Toolbox (Cat. Nos. 54802Mb, 54803Mb) With The Internal Rail Accessory (Cat. No. 54818Mb), Sold Separately

Category: Components Kits

Cover Screw, 1" Length, Used with BR and CH Series Loadcenter Covers, Order of 1 Each = 1 Screw

Category: Load Center Cover Screws

Flashing Panel, Used on 1-Coat Stucco & EIFS Systems, Rise: Flat, Fits Specified 4/0 Steel Boxes (See Compatibility Chart), 11-1/8" x 11-1/8" x 3/32".

Category: Weatherproof Box Flashing Panels