"ab-66l90 the austin co."

For transitioning from MXN2A08 Corner Drop to a horizontal run of 5400TB Series Raceway to the left. Ivory

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Terminal Block Bracket Assembly For Junction Box, Length: 10 Inch, Material: Steel/White, (2) Brackets Per Package Which Mount on the Weldnuts of Junction Box.

Category: Enclosure Grounding Kits

Replacement Coil For The Advantage Starter, Coil Size 5 - 6, 110/120v, 60 Hz

Category: Starter & Contactor Replacement Coils

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. TR indicates tamper-resistant version secured with tamper-resistant screw. Finish - Aluminum

Category: Square / Rectangle Recessed Box Covers

Protects against Knife Injuries on the Job, Cleanly Strips Cu THHN/XHHW Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

CUT 3MM320RC 200A MTR STACK, 3PH, 3 SOCKET, RING, COPPER, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Residential Meter Stacks

C-H 37MM140R1240300 37MM-THRE, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Commercial Meter Stacks

C-H UHT4R2352TCH METER SOCKET, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Meter Packs

Install HMI components or add holes and cutouts to the Front Plate for Concept HMI Enclosure. This Replacement Front Plate for Concept HMI, CPFP3740 item fits 370x400mm with a material of Aluminum colored Lt Gray.

Category: Enclosure Front Plates

Cable Runway Center Support Kit supports center of ladder rack from the ceiling. This Runway Center Support Kit, LCSK24 item fits 24.00 with a material of Steel finish Black.

Category: Cable Tray - Runway to Ceiling Kits

Kit Comes Complete With Adapter Ring To Secure Into The Boxes, (1) 3/4" Trade Size Screw Plug And Conduit Fitting For Power, 1-1/4" Trade Size Screw Plug And Conduit Fitting For Low Voltage (Communications Or Audio/Video) Services

Category: Round Recessed Box Covers

For dropping cables from ceiling into the raceway. Has 1/2" and 3/4" concentric trade size KOs. Includes PN153R Reducer Adapter for use with PN03 Series Raceway.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

App 4250us 2-1/2" Emt Stl Ss connector Made In The Usa

Category: Steel EMT Set Screw Connectors

Glass Fiber Optic Cable, Enhanced 50 Series, Forward Viewing, Sensor Distance: Depends On The Controller Used, PVC/Monocoil Enclosure, Fiberoptic, Diffuse

Category: Sensor Cables

Tunnel allows for a single service to be fed from one external compartment across the opposite external compartment while maintaining service separation.

Category: Recessed Floor Box Service Fittings

Replace The Numbers, Letters And Characters You Need In Your Porta-pack Books With Our Convenient Ten Pack Refills. Made Of Durable B-500 Vinyl Cloth Materialand Available In Over 250 Different Refill Packs. Each Refill Pack Contains 10pages.

Category: Wire Marker Cards

30 Amp, 2-Pole, Compact Definite Purpose Contactor, 600V Rated, Box Lug Terminals, 120V AC Coil. ***No Replacement Coils Available for the Compact Series***

Category: 2-Pole Definite Purpose Contactors

Meter Pack, Ring Style Meter Socket Covers, 1-phase, 4 Meter Sockets, 125 Amp Socket Rating, 400 Amp Bus Rating, Copper Bus, Underground Incoming Feed, Does Not Include 5th Jaw, Requiresplug-on Type Main Tenant Circuit Breaker, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Meter Packs

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type TB Conduit Bodies

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 304 AISI stainless steel with a fold-over lock, it is ideal for indoor and outdoor conditions. Low-profile buckle, 37"L (940mm), 0.6"W (15mm), Tensile Strength: 372

Category: Non-Releasable Cable Ties

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Blue, 5 meters.

Category: Category 6 Patch Cords

The cable identification sleeve in aqua is for 2mm simplex cable with labels S100X150YAJ (laser/inkjet), S100X150VAC (LS8E handheld printer), and S100X150VA1Y or S100X150VATY (thermal transfer printer). It is 1" long and made of flexible PVC. It comes in

Category: Clip-On Wire Markers

The self-laminating cable marker holder in orange measures 3.00"W x 1.31"H. It is made of self-laminating vinyl and comes 25 tags to a package, sold individually.

Category: Self-Laminating Labels

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Orange, 7 meters.

Category: Category 6 Patch Cords