"ab-242412sb the austin co."

Double-Braided Composite Rope for Cable Pullers, 1200' length with 8,000 pound Maximum Rated Capacity. Double-braided inner core with an extra double-braided outer jacket for added strength and less stretch. White with green tracer. Rot and mildew resistant. Factory spliced eyes at both ends. Lowest stretch. Select a rope with a maximum rated capacity that meets or exceeds the cable puller's maximum pulling force.

Category: Pull Rope

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Nylon 6.6 material, it's ideal f

Category: Non-Releasable Cable Ties

Suitable for use on Class A (trash, wood and paper), Class B (liquids and gases) and Class C fires (energized electrical equipment). The Pro 2.5MP unit is fitted with a pressure gauge that provides at-a-glance status, cylinder is manufactured from impact

Category: Fire Extinguishers

The closed cable tie connector ring in black is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is 0.57" long x 0.36" wide (14.5 x 9.1 mm) and is used with miniature, intermediate, stan

Category: Cable Tie Bases

The Supra-Grip™ female disconnect is made of brass and is tin-plated. It is fully insulated in red nylon. It has a tab size of 0.187 x 0.020 (4.8 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.89" (22.6 mm) long and 0.29" (7.4 mm)

Category: Female Nylon Insulated Wire Disconnects

Super-Grip® Cable Ties are designed with high strength and flexibility to tightly grip bundles and resist lateral movement despite the rough conditions of MRO and construction environments. Plus, with weather-resistant Nylon 6.6 material, it's ideal for i

Category: Non-Releasable Cable Ties

The cable tie mount in black is applied with a #4 (M2.5) screw and is 0.32" (8.1 mm) wide. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in package

Category: Cable Tie Bases

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 316 AISI stainless steel with a fold-over lock, it is ideal for severe weather, intense UV rays, high vibration and galvanic corrosion. Low-profile buckle, 31"L (78

Category: Non-Releasable Cable Ties

The low profile flat cable tie mount in gray is applied with rubber adhesive tape. It is 0.13" (3.4 mm) high and can support a maximum flat cable width of 1.44" (35.6 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resista

Category: Cable Tie Bases

Includes insert stem with disposable plate and two-gang service head with housing, base, scrub water gasket, and barrier. Service head and insert install together to make a poke-thru assembly. Combine with faceplates (sold separately) to complete service head assembly. Shown assembled. Service head is shipped unassembled with the insert stem. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Requires a minimum 3 1/16" (78mm) diameter hole.

Category: Assembled Poke-Through Units

The Panduit Pan-Steel® low-profile buckles are designed to maintain a safe, secure connection. Built with 304 AISI stainless steel with a fold-over lock, it is ideal for indoor and outdoor conditions. 0.6"W (16mm), 100pc.

Category: Non-Releasable Cable Ties

TPI EPETD8S SPST HAZ LOC REMO

Category: Line Voltage Thermostats

Pan-Steel® Polyester Fully Coated Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, 316 stainless steel is wrapped in UV-resistant, halogen-free, low-smoke Polyester to promote worker safety

Category: Non-Releasable Cable Ties

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 304 AISI stainless steel with a fold-over lock, it is ideal for indoor and outdoor conditions. Low-profile buckle, 24"L (620mm), 0.6"W (16mm), Tensile Strength: 372

Category: Non-Releasable Cable Ties

Pan-Steel® Polyester Fully Coated Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, 316 stainless steel is wrapped in UV-resistant, halogen-free, low-smoke Polyester to promote worker safety

Category: Non-Releasable Cable Ties

Exclusive Bi-Layer Comfort System For Superior Support And Comfort, Top Layer: Moisture-Wicking With Both Cooling And Thermal Insulating Properties, Bottom Layer: Poron® Cushioning Absorbs Impact, Resists Water, And Conforms To The Leg For Comfort, Protective Polyurethane-Coated Leather Resists Weathering, Water Absorption And Cracking, One Size Fits Most, Sold In Pairs, Includes Metal Inserts, Poron® Is A Registered Trademark Of Rogers Corp

Category: Pole Climbing Pads

The push button cable tie mount requires a 0.25" (6.4 mm) hole and is natural color. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases

Install HMI components or add holes and cutouts to the Front Plate for Concept HMI Enclosure. This Replacement Front Plate for Concept HMI, CPFP3740 item fits 370x400mm with a material of Aluminum colored Lt Gray.

Category: Enclosure Front Plates

Complete cover and stem assembly. The flange is a one-piece design with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Finished color gray.

Category: Assembled Poke-Through Units

Accessory Door Shelf, For the Right inside door, For Model 99, 109, 111, 112, 139

Category: Mobile Storage Boxes

Modbox™Tool Tray Nests Within The Modbox™ Medium Toolbox (Cat. No. 54803Mb) And Rolling Toolbox (Cat. No. 54802Mb), Sold Separately, Removable Tool Tray With Handle Provides Extra Organization And Convenience, Dual Compartments With Deep Storage For Hand Tools, Meters, Worklights, And Knives, Handle Has Indent To Store Smaller Items Such As Writing Utensils, Modbox™ Medium Toolbox (Cat. No. 54803Mb) And Rolling Toolbox (Cat. No. 54802Mb) Accommodate Two Tool Trays, Toolboxes Are Made With Impact Resistant Polymers And Ip65 Rated For Protection Against Debris And Rain, Modbox™ Components Easily Interconnect For A Customized Mobile Workstation

Category: Compartment Boxes

Chicago Grip For Pvc-Covered Conductors, Serpentine Jaws Are Specially Machined To Allow Insertion Of Insulated Conductor Through The Jaws, Which Reduces Danger Of Slippage Which Might Result In Insulation Damage

Category: Utility Pole Dead End Grips

Cable Runway Ceiling Support Kit has a variety of components to support ladder rack from the ceiling. This Ceiling Support Kit Threaded Rod Kit, LTR item mesasures 5/8inx6ft with a material of Steel finish Plated.

Category: Straight Cable Ladder Tray

The vibration resistant female tab disconnect is made of brass and is tin-plated. It is fully insulated in a blue, nylon standard receptacle housing and has an expanded wire entry area for wires with large outside diameters. It has a tab size of 0.250 x 0

Category: Female Nylon Insulated Wire Disconnects