"connector waterproof"

Aluminum Splicer Reducer 750 - 250 MCM Aluminum Splicer Reducers are used for splicing two copper or aluminum wires of equal or different sizes. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600 volts.

Category: Aluminum Splice Reducing Lugs

Easy-Splice Heat Shrinkable End Cap 4/0 AWG - 750 MCM These caps replace greases, tapes, epoxy, encapsulation, or dips. In most sizes, installation may be accomplished in less than one minute. Heat-shrinkable end caps provide for efficient and positive cable end sealing. Made of thermally stabilized polyolefin, the interior of the HSC is coated with a meltable sealant to assure a watertight seal, complete insulation, abrasion and corrosion resistance. Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit. HSC end sealing caps are qualified to ANSI C119.1-1986 and rated to ICEA electrical withstand test for 1,000 volts. HSC end sealing caps can be used as a live seal for cables carrying up to 1,000 volts. They can also be used as end seals for storing and pulling de-energized cable.

Category: Heavy Wall Heat Shrink

(1) 500-6 Primary (12) 4-14 Secondary, Power Distribution Block

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

NSI GLC-440DB "HEAVY DUTY GRO

Category: Bare Wire Ground Clamps

Nylon Insulated Ring Terminal, 4 AWG, 5/16? Stud, 15 per Pack

Category: Nylon Insulated Ring Tongues

8 AWG Nylon Insulated Ring #10 Stud, 25 Per Pack

Category: Nylon Insulated Ring Tongues

NSI APS41 1/0 STR - 250 MCM A

Category: Aluminum Split Bolts

NSI 6-350LL8 LUG 350 MCM-6 AW

Category: 4-Conductor Aluminum Mechanical Lugs

Copper Compression Lug, Conductor Size: 3/0 AWG, 2-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 2-Hole Long Barrel Copper Compression Lugs

Nsi 600l2 NEMA Panel Lug 600 mcm-2 Awg Mounting Hole 1 3/4 Center To Center

Category: Aluminum Panelboard Lugs

NSI L2N-382P #2 AWG MAX WIRE

Category: 2-Hole Long Barrel Copper Compression Lugs

NEMA PANEL LUG (4)800-300

Category: Aluminum Panelboard Lugs

600 MCM-2 , 4 Hole Stacked Lug Mounting Hole, 1 3/8

Category: Aluminum Panelboard Lugs

Copper Compression Lug, Conductor Size: 4/0 AWG, 2-Hole Stud, Long Barrel, Stud Diameter: 3/8".

Category: 2-Hole Long Barrel Copper Compression Lugs

1 Hole Long Barrel Copper Compression Lug 1/0 AWG - 3/8" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .

Category: 1-Hole Long Barrel Copper Compression Lugs

NSI APS11 6 SOL - 1/0 STR ALU

Category: Aluminum Split Bolts

Nylon Insulated Ring Terminal, 12-10 AWG, #8 Stud, 600 Volt, Yellow, 50 per Pack

Category: Nylon Insulated Ring Tongues

Vinyl Insulated Ring Terminal, 22-18 AWG, #6 Stud, 300 Volt, Red, 1000 per Pack

Category: Nylon Insulated Ring Tongues

Nylon Insulated Ring Terminal, 12-10 AWG, #6 Stud, 600 Volt, Yellow, 50 per Pack

Category: Nylon Insulated Ring Tongues

Vinyl Insulated Ring Terminal, 12-10 AWG, #8 Stud, 300 Volt, Yellow, 500 Per Pack

Category: Nylon Insulated Ring Tongues

NSI R6-10 # 6 TERMINAL

Category: Nylon Insulated Ring Tongues

Ring Terminal, Nylon Insulated, 16 - 14 AWG, Stud Size: #10, Color: Blue, Package of 100 Each.

Category: Nylon Insulated Ring Tongues

Nylon Insulated Ring Terminal, 12-10 AWG, 5/16" Stud, 600 Volt, Yellow, 40 Per Pack

Category: Nylon Insulated Ring Tongues

NSI N-6L 6 AWG 3 WIRE COPPER

Category: Copper Alloy Split Bolts