"ab-6672rtg the austin co."

OCC's Category 6A field terminable plug is designed to support 10 Gigabit networks and can be easily terminated using parallel jaw pliers. Termination is accomplished by simply inserting the conductors into the wire manager, squeezing the wire manager to terminate the conductors and inserting wire manager into the plug housing. All eight conductors are simultaneously terminated when the wire manager is squeezed. This process ensures consistent, reliable terminations.

Category: Snap-In Cat 6 Jack Inserts

Combo Drill/Tap Bit, Size: 10-32NF, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

2-Gang, 1-Duplex 1-Decora/GFCI Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: Duplex Receptacle / Decorator-GFCI Combination Wallplates

Multi-Purpose Adapter Makes The Sockets Compatible With The Klein Knect™ System For Unlimited Driving Potential, Five Deep Well, Color-Coded, Impact Flip Sockets, Eight Color-Coded Low Profile Sockets, And Six Adapters For Maximum Flexibility, Set Includes A Pass Through Ratchet, 1/4 X 5/16, 3/8 X 7/16, 1/2 X 9/16, 5/8 X 3/4, And 11/16 X 13/16 Inch Deep Well Sockets, And 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16-Inch Low-Profile Sockets, Three Smallest Sockets (1/4-Inch To 9/16-Inch) Are Stackable On 650Qsal Shaft To Quickly Change Socket Sizes And Reduce The Number Of Tools Needed, Klein Knect™ Specialized Square Drive Adapters Compatible With Klein Tools Pass Through Socket Wrench (Cat. No. 65400) And Any 3/8-Inch Square Drive Ratchet, Small Parts Storage Tray Inside The Case To Secure Loose Fasteners, Washers And Extra Bits, Compact, Modular Storage System With A Clear Lid Is Compatible With Modbox™ And Stackable With Other Cases Of Its Similar Design, All Components Are Compatible With The 90-Tooth Pass Through Ratchet With Minimal Arc Swing For Ratcheting In Tight Spaces

Category: Sockets & Socket Sets

Conduit Strap, 1-Hole, 3/4 Inch Diameter, Malleable Iron With Hot Dipped Galvanized Finish, For Use With Rigid/IMC/EMT Conduit

Category: Malleable Iron 1-Hole Conduit Straps

Diva Smart Dimmer Switch for the Caséta System, Works With 150W LED Bulbs or 600W Incandescent Bulbs, Does Not Require Neutral Wire, Tap Buttons For Full On/Off; Adjust Slider To Dim Or Brighten Light Level, Preset Allows You To Turn Your Lights On To Your Preferred Predetermined Level, Soft-Glow Light Bar Provides Easy And Precise Dimming Control, Add A 2nd Switch Anywhere By Pairing With A Mountable Pico Remote (Sold Separately), Use With A Mechanical Switch To Create A 3-Way Application, Add A Smart Hub To Connect With Alexa, Apple Home, The Google Assistant, Ring, Serena Shades, SONOS, And More Control At The Wall, With A Pico Smart Remote, With A Phone, Or Voice Assistant (Smart Hub Required For Phone And Voice Assistant Control)

Category: Wired Smart Devices

Fluorescent Lampholder, Non-Shunted, Medium Base, Bi-Pin, Slide-On, Turn-Type, Low Profile, Quickwire 18AWG Solid/Str Tinned, White, Includes Captive Nut Screws

Category: Medium Base Bi-Pin Fluorescent Lampholders

Non-Contact Voltage Tester, UL Certified CAT IV 600V AC, 50 to 600 V AC, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), The Tester Will Emit One Long Beep (~0.5s) And Then Shut Off, Note: If The Flashlight Is On, It Will Be Also Shut Off, Low Battery Indication - If Battery Voltage Is Less Than Around 2.4V, The Green LED In The Tip Will Flash 3 Times And The Buzzer Will Send Out One Long Beep, Then Turn Off The Device

Category: Voltage & Continuity Testers

Plastic Wallplate Adapter; Blank Toggle. No Hole. White.

Category: Blank Wallplate Inserts

Padlockable Handle with 3 Padlocks in the OFF-position, Door Interlock in the ON-position. Units/type = 1 pcs. Screw Fixing from the Back Side of the Handle, No Screws on the Front, Ensures Double Insulation, Black

Category: Molded Case Circuit Breaker Operating Handles

The LBI junction box is used to connect LBI wiring to branch circuits. Connections are made from the LBI Junction box to the Light Bar using seamless connector or linking cable. The junction box includes an optional 120V ON/OFF switch that can be installed into a rectangular knock-out on the cover. Kit includes 1pc RP-LBI-SSC-DIM

Category: LED - Retrofit Kits/Accessories

(3) 10 AWG Conductors and (1) 10 AWG Ground, NM-B, Pink (Some Remaining Orange Inventory), Solid Copper Conductor, 90°C Insulation, 600V, 250 ft. Package, Non-Metallic Sheathed Cable *** There is a current initiative among manufacturers for Purple to be the default color for 10/3 NM-B instead of the traditional Yellow. As inventories adjust, customers could receive either color. ***

Category: 10 AWG NM-B

M210 Portable Label Printer Kit, Auto-Format Labels With 11 Pre-Loaded Application Design Guides For Rapid And Accurate Label Creation, Military-Grade Shock And Vibration Resistance Per MIL-STD-810G Method 5.16.6 SA4.6.5 – Drop Tested To Withstand The Roughest Job Sites, Easy-To-Access Hot Keys And Menus For Fast Label Creation, On-Board Symbols And The Ability To Store 12 Label Files Up To 2MB, Ability To Create UPC, DataMatrix, And QR Codes, Onboard Label Material Gauge Tracks The Amount Of Material Left In The Cartridge, Includes: (1) AC Adapter/Battery Charger (M210-AC), (1) M210 Label Printer (M210), (1) M21 Series Nylon Cloth Patch Panel and Wire and Cable Labels (M21-750-499), (1) Li-ion Rechargeable Battery (M210-BATTERY), (1) Quick Start Guide, (1) Replacement Power Cord - North America & (1) Hard Case (M210-HC)

Category: Portable Label Printers

1-Gang, No Device Blank Wallplate, Standard Size, Thermoplastic Nylon, Box Mount - Ivory.

Category: 1-Gang Blank Wallplates

50 Amp, 125/250 Volt, NEMA 14-50P, 3P, 4W, Plug, Straight Blade, Industrial Grade, Grounding, Angle - Black

Category: 50 Amp Straight Blade Plugs

15 Amp, 120/277 Volt, Duplex Style Single-Pole / Single-Pole AC Combination Switch, Commercial Grade, Grounding, Side Wired - White.

Category: 15 Amp Combination Toggle Switches

20 Amp, 120/277 Volt, Toggle 3-Way AC Quiet Switch, Commercial Grade, Grounding, Side Wired - White.

Category: 20 Amp Commercial Grade Toggle Switches

Padlockable Handle with 3 Padlocks in the OFF-position, Door Interlock in the ON-position. Units/type = 1 pcs. Screw Fixing from the Back Side of the Handle, No Screws on the Front, Ensures Double Insulation, Black.

Category: Padlockable Circuit Breaker Handle Locks

Claro Smart Switch for the Caséta System, Works With 5A LED, 3A General Purpose Fan, or 600W Incandescent, Neutral Wire Required, Provides On/Off Control of Lights or Fans, LED Indicator Light on Right Side of Switch Produces a Soft Glow When Control is Activated, Useful for Areas Where Dimming is Not Needed, Such as Garage or Outdoor Porch Lights, Add a 2nd Switch Anywhere by Pairing With a Mountable Pico Remote (Sold Separately), Use With a Mechanical Switch to Create a 3-Way Application, Add a Smart Hub to Connect With Alexa, Apple Home, the Google Assistant, Ring, Serena Shades, SONOS, and More, Control at the Wall With a Pico Smart Remote, or With a Phone (Smart Hub Required for Phone Control)

Category: Wired Smart Devices

Socket Set Contains Most Common Metric Deep-Well Impact Socket Sizes Up To 24 Mm, Deep-Well Slim Profile Impact Sockets Provide Increased Access And Reach For Longer Bolts And Hard To Reach Areas, Klein Knect™ (M) Specialized Adapter Allows Any 1/2-Inch Drive Sockets To Be Used On The Knect™ (M) Pass Through Socket Wrench, Clearly Stamped Size Markings With White In-Fill And A Color-Coded Ring Ensure Easy Socket Size Identification, Includes A 3-Inch (7.6 Cm) Long 1/2-Inch Drive Impact Adapter Which Allows The Socket To Be Used With A 1/4-Inch Impact Driver, Cold Forged, Heat Treated Cr-Mo Steel Impact-Rated Sockets Are Engineered To Withstand The Torque Of The Toughest Jobs, Compact, Modular Storage System Is Designed To Nest Neatly Within The Klein Modbox™ System

Category: Sockets & Socket Sets

Combo Drill/Tap Bit, Size: 8-32NC, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

Incandescent Lampholder, Medium Base, One-Piece, Glazed Porcelain Outlet Box Mount Lampholder, Pull Chain, Single Circuit, Top Wired, White

Category: Pull Chain Incandescent & HID Lampholders

Combo Drill/Tap Bit, Size: 6-32NC, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

Beam Clamp, Malleable, 2", 2-1/16" High, 3/8-16 Threads, Hot Dipped Galvanized

Category: Beam Clamps - Adjustable