"7731w-box cooper wiring devices"

Eaton Blank wallplate, Box mount, Lt. Almond, Blank Cutout, Polycarbonate, Single- gang, Mid-size

Category: Midway & Oversized Blank Wallplates

WMD 44DEC 4IN EVO DECORATOR D

Category: Poke-Through Cover Assemblies

100 ft All Weather Extension Cord with Oil/Water Resistant Jacket/Insulation and Quick Check Light Indicator. SJEOOW/SJTOOW, NEMA 5-15. Size/Number of Conductors: 16/3. Rating: 10 Amp, 125V AC, Blue, stays flexible in extreme cold or heat

Category: All Weather Extension Cords

Isobar 4-Outlet Surge Protector, 4-Outlet, 6' Cord, Right Angle Plug, 3330 Joules, Diagnostic LEDs, Metal Housing

Category: General Duty Power Strips

Hole Seal, for 0.75" Conduit. Size/Dims: 1.56", Material/Finish: SS Type 304.

Category: Stainless Steel Enclosure Hole Seals

Liquidtight System, Swivel Male Liquidtight Connector, 3/4 inch,Non-Metallic, Black

Category: Zero To 90 Degree Adjustable Non-Metallic Liquidtight Flex Connectors

Available in black (BK), gray (GY), painted brass (BS), and ivory (VY). NOTE: To abandon the RC4 Series Poke-Thru Device, the internal gasket, duplex receptacle, and communication modules must not be removed in order to maintain UL Classification. Also the stem must remain in the hole. Black

Category: Round Recessed Box Covers

Panel, 34.20x34.20, Size/Dims: fits 36.00x36.00, Material/Finish: Steel/White.

Category: Enclosure Back Panels

Non-Metallic, 2-Gang, Device Box. Size: 4-7/8" Length, 4-3/4" Width, 1-3/4" Depth. PVC, Fog White.

Category: 2-Gang Raceway Device Boxes

1/2 Npt X Cst Iron Fd Box Sngl Gng Mtg Lugs

Category: 1-Gang Malleable Iron FS & FD Device Boxes

OZG FSCT1100 FS 1G CB 1 I

Category: 1-Gang Malleable Iron FS & FD Device Boxes

4 Inch Square Cover, 1-Device, Mud Ring, 1/2 Inch Raised, Drawn, Metallic

Category: 4" Square Metallic Box Mud Rings

OCA CFSRG-G VERT GFI PLATE

Category: PVC Coated FS & FD Device Box Covers

3/4 INCH 2 GANG FS BOX

Category: PVC Coated FS Device Boxes

THB FDC12-TB 1/2IN 2G-DEEP B

Category: PVC Coated FS Device Boxes

OCA FSR2-B DEV BOX R HUB 1GNG

Category: PVC Coated FD Device Boxes

Holds four (4) Legrand AVIP or Extron Electronics MAAP devices. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

OCA IH31-G PVC CTD WTHRPRF BO

Category: PVC Coated FD Device Boxes

KRA FSE05 SG. CSA BOX

Category: 1-Gang Non-Metallic FS & FD Device Boxes

OCA FD3SA-G DEADEND BOX DEEP

Category: PVC Coated FD Device Boxes

THB 3731-RS BOX FD SINGLE GAN

Category: 1-Gang Stainless Steel FS & FD Device Boxes

THB 3732-RS 50A BOX FD CAST 2

Category: 2-Gang Stainless Steel FS & FD Device Boxes

APP EGC210 GROUND FAULT IND BOX CSA

Category: Explosion-Proof Assembled Receptacles

38369WS-UL Low Voltage Enclosure, w/ Splice Chamber. This enclosure is made of 14-gauge zinc-coated fabricated steel with a hinged door. Both are powder coated with a tan finish. This surface mounted service box is fully enclosed. The door is embossed with the word “Communication”. It also includes a 3/4? plywood backboard for easy mounting of low-voltage utility equipment and a 4-position #4-14 wire ground bar mounted inside. The BN38369WS-UL is UL listed (UL1863) and designed to NEMA 3R Specifications. The reinforced hinged door fastens with a standard 7/16? box wrench. This enclosure is nailed or screwed to an existing surface. This enclosure includes 2 bottom knockouts 2-1/2? to 3-1/2? (for 3? t0 4? conduit) and 8 bottom knockouts 1-3/8? to 1-3/4? (for 1? to 1-1/2? conduit). This enclosure also includes 2 “J-Hooks” for ease of mounting. This exterior surface mounted enclosure is specifically designed to house communication / utility/security/home audio-video wiring demarcation devices.

Category: Outdoor Surface Mount Data, Audio, & Video Enclosures