"651 a"

LED Enclosure Light with quick-install feature allows fitting to the 25mm hole pattern of enclosure profiles. This EL LED Light With Socket and Motion Sensor B, 100-240V, EL1200MS-US item measures 76x364x48mm with a material of Plastic color Black.

Category: Enclosure LED Light Packages

9.8 Watt; A19 LED; 2700K; Medium Base; 220 deg. Beam Angle; 120V

Category: A-Type Traditional LED Lamps

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

A200/B100 Heater for Type A and B Overload Relays, Size 0,1, & 2 Starter, Range 2.20 - 2.99 FLA (Full Load Amps).

Category: Heater Elements - A200/B100 Series

Zonex Enclosures certified to meet ATEX and IECEx standards for Zone 1 and Zone 2. This ZonEx ATEX- and IECEx-Certified Type 4X 1 GP, ATEX262616SS61 item measures 260x260x160mm with a material of SS 316, Brushed.

Category: Stainless Steel Wall Mount Enclosures

Easy Stripper Replacement Blade Version 2

Category: Wire Strippers

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

A200/B100 Heater, Ambient 12.5-13.5, 14.4-15.7A, Non-Comp 11.6-12.6, 14.1-15.3A, Type A and B

Category: Heater Elements - A200/B100 Series

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

A200 Heater for Type A and B Overload Relays, Size 3 & 4 Starter, Range 73.00 - 84.00 FLA (Full Load Amps)

Category: Heater Elements - A200/B100 Series

RAK 55632

Category: Portable Wire Dispensers

Tuff-Seal™ Support Grips are designed to hold the weight of cable that is vertical or sloping. Support grips serve an important function; electrical cables must be supported or their dead weight can cause excessive strain or pullout at the connections resulting in power failure. Tuff Seal™ Support Grips are woven with non-magnetic, tinned bronze wire that absorbs strain and flexing while resisting cable pull-out, flexing and vibration. These grips are available in a variety of eye styles and cable ranges, can be used either indoors or outdoors, and will support cable, metal rods and tubing with loads up to 600 lbs.

Category: Closed Mesh Single U Eye Support Grips

Eaton B-Line series bussed gutter and termination cabinets, 400 A, 3R, 10 kAIC, #4 - 600 MCM, 5 positions, 5/16" mounting holes for load lugs, Galvanized steel, 1Ø/3W, (2) 1/0-250 MCM cables, NEMA type 3R, 1Ø/3W, Surface mount

Category: Straight Busway Sections

20A Power Pack for Occupancy Sensors, Features Include Auto ON, Photocell, Latching Relay; Line Voltage Input: 120/208/220/230/240/277V, 50/60Hz; Low Voltage: Input-24VDC, 2mA, Output-24VDC, 225mA. Housing: 1/2" Threaded Nipple w/Locknut (Fits On Or In a 4" Square Box), RoHS Compliant, Title 24 Compliant, ASHRAE 90.1 Compliant, Gray

Category: Occupancy Sensor Power Packs

ABB C3SS210B-11; Selector Switch; Compact; Amperage Rating: 1 Amp At 220/240 Vac, 1.5 Amp 24/127 Vac, 0.2 Amp At 125 Vdc, 0.3 Amp At 24 Vdc; Action: Spring Return From A And C To B; Actuator: Short Handle; Size: 03 Mr Width X 03 Mr Height X 072 Mr Depth; Enclosure: Ip20; Operating Temperature: -25 To +70 Deg C; Bezel Material: Black Plastic; Function: Three Position Return To B; Iit Publishing Status: Level 0- Information Enabled; Endurance: Mechanical: 0.5 Million Cycles; Illumination:non-illuminated

Category: 22mm Knob Selector Switches

Low Power DC Power Supply, 85 To 264 VAC/90 To 375 VDC Input, 24 To 28 VDC Output, 30 W, 2.1 A, DIN Rail Mount

Category: 1-Phase DC Power Supplies

Palmer Micro Foam Gloves, Thin Layer of Micro-Foam Over Fingers And Palms Over A Comfortable, Knit Liner, Size: X-Large

Category: Dipped Gloves

Designed for indoor use for applications that require a junction or pull box to secure and manage electrical connections.

Category: NEMA 1 Screw Cover Enclosures

Receptacle, Self-Test GFCI, 20 Amp, 125 VAC, NEMA 5-20R, 2-Pole, 3-Wire, Extra Heavy Duty, Hospital Grade, Self Grounding, Color: White ***Wiring Module Required When Ordering Any LevLok Receptacles (MSTWL-A)***

Category: 20 Amp Hospital Grade GFCI Receptacles

Adhesive backed latching clip, .36" (9.1mm) square bundle, light gray.

Category: Cable Clamps & Clips

Lev-Lok Decora Plus Duplex Receptacle Outlet, Extra Heavy-Duty Hospital Grade, Smooth Face, 20 Amp, 125 Volt, Modular, NEMA 5-20R, 2-Pole, 3-Wire, Self-Grounding - Ivory ***Wiring Module Required When Ordering Any LevLok Receptacles (MSTWL-A)***

Category: 20 Amp Hospital Grade Decorator Receptacles

18" Aluminum Offset Pipe Wrenches, 2" Jaw Capacity, Designed to Fit in Tight or Odd Spaces, Jaw Opening Parallel to the Handle and a Narrower Hook Jaw Head

Category: Pipe Wrenches

Screw-Cover Pull Box Extender Type 1 creates additional wiring space for existing pull box. This Screw-Cover Pull Box Extender Type 1, A12124SUG item measures fits 12.00x12.00 inches with a material of Steel finish Galvanized.

Category: Enclosure Surface Covers & Doors