"HD98 TAC20 AND TAC22"

15 Amp-120/277 Volt Ac. Three-way Decora Rocker Switch Back And Side Wired. Light Almond

Category: 15 Amp Commercial Grade Decorator Switches

Long-Line Coupling with Conduit Stop, Size 2 Inches, Material PVC, Color Gray, For use with Schedule 40 and 80 Conduit

Category: PVC Long Line Couplings

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses come with a 3 (size D) or 4 (size E) inch diameter barrels with ferrules and are mounted in spring reinforced clips. 1500 Volts 3 Amps A480R series.

Category: R-Rated Motor Circuit Protection Fuses

Fuse Bases, 200 Amp, Stud Height: 1.75 Inch, Stud Thread: 5/16-18, Base Material: Phenolic, The Simpler Design Is The C5268 Series Modular Fuse Base. With This Design, The Fuse Terminal and Cable (With Termination) Are Mounted on The Same Stud, Minimizing Labor Needed For Installation.

Category: Terminal Junction Blocks

Crimping Die, "U" Style, For Use With Service Entrance Connectors, C-Taps, H-Taps, Overhead and Underground Connectors, 12 Ton Tools, With EK1230L, EK1240L, HK1230, HK1240, RK1240, HKL1232, and E12CCX Tools, and RK1550 Equipped with 48802 Die Adapter

Category: Wire Crimping Dies, Adapters, & Blades

Raised 3/4 In. and Flat for Device and Wire Protection, Flat, Gangablefor RACO® 686, 687, and RACO Gang Masonry Boxes

Category: Snap-On Safety Plates

OZ-Gedney Type 900 Non-Watertight Connector, Size: 1-1/4 IN, Connection: Male NPS Hub X Set Screw, Conductor Range: 0.73 - 1.34 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 2-7/8 IN Diameter X 1.34 IN Width, 13/16 IN Thread Length, 9/16 IN Hub Turning, Third Party Certification: UL File Number E-11856 (SE Cables), UL File Number E-11858 (NM And SE Cables), Applicable Third Party Standards: UL 514B, Federal Specification W-F-406E, For Securing SEU And Other Round Non-Metallic Cables To Boxes And Enclosures In Dry Locations

Category: Zinc Die Cast NM Cable Connectors

High speed steel teeth provide a strong, long lasting cutting edge. Bi-metal blades bend and resist breaking and extend blade life. Professional performance and competitive pricing provide extraordinary cost per cut value

Category: Bandsaw Blades

Explosion-Proof Junction Box, Hub Size 1/2 Inch, Overall Size 9.13 Inch L x 7.13 Inch W x 6.13 Inch D, Inner Size 6 Inch L x 4 Inch W x 3.75 Inch D, Cover Type Bolt-On, Hinged, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, NEMA 4/9EFG, IP66, Body Material Sand Cast Copper-Free Aluminum, Body Finish Shot Blast, Cover Material Sand Cast Copper-Free Aluminum, Cover Finish Shot Blast, Mounting Horizontal/Vertical with Slotted Feet, Approval UL 886, CSA C22.2, Application Hazardous Location, Used On Terminal, Splicing wire, Pull box, Bus box, Includes Stainless Steel Cover Bolt, Neoprene O-Ring, Galvanized Steel Mounting Pan

Category: Hazardous Locations - Industrial Enclosures

ALTV1224C CCTV Power Supply, 16 Fused Outputs, (8 @ 12VDC and 8 @ 24VAC) @ 7A, 115VAC, BC400 Enclosure

Category: CCTV & Video Surveillance 24V AC Power Supplies

Aluminum Multiple Connector 2/0-14 AWG 8 Holes Multiple connectors are made from eithercopper or aluminum bar and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper or aluminum conductors.

Category: Load Center Neutral & Ground Bars

1/2" (Tb) Threaded Conduit Bodies With Covers And Gaskets

Category: Type TB Aluminum Conduit Bodies

Easy-Splice Direct Burial Splice Kit with Rubber Cover 14 - 2/0 AWG Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Low Voltage Direct Burial Splice Kits

Crimping Die, "U" Style, For Use With Service Entrance Connectors, C-Taps, H-Taps, Overhead and Underground Connectors, 12 Ton Tools, With EK1230L, EK1240L, HK1230, HK1240, RK1240, HKL1232, and E12CCX Tools, and RK1550 Equipped with 48802 Die Adapter

Category: Wire Crimping Dies, Adapters, & Blades

Heat Pump, Unit Only, Outdoor, High CFM: 715, 208/230V, 22.0 SEER, 19,000 BTU, Rated For Heat Operation And -5°F, Max Lineset Length Without Adding Refrigerant: 98' Total. ***Requires EPA Section 608 certification for installation

Category: Outdoor Units

Explosion-Proof Conduit Sealing Fitting, Turning Radius 6-5/16 Inch, Trade Size 5 Inch, Connection Type Male, Female, Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron, Mounting Position Horizontal/Vertical, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, Approval UL 886, CSA C22.2, Overall Length 13-9/16 Inch, Application Seal Conduits in Vertical or Horizontal, to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames from One Portion of the Electrical System to Another Through the Conduit, Constructional Feature Explosion-Proof

National Electric Code requires electrical distribution equipment to be rated as ôService Entranceö, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading.

AZCO 3" DB120 90X18"

Features high performance, this all-purpose sorbent is made to handle virtually any liquid (water, petroleum and chemical-based).3-ply construction; double-sided, low-linting coverstock and meltblown core; heavy weight perfed pads. Premium extra-tough universal sorbent for industrial maintenance and hazmat, abrasion resistant and non-abrasive performance, perfect for wipe down applications. Extra strength allows wringing and re-using of sorbents.

This Amprobe Thermometer is the professional choice for HVAC technicians, electricians, research, industrial process, and quality control, these thermometers offer dual inputs for easy super-heat and sub cool temperature measurements. To monitor and track temperatures, the multi-logging thermometers feature real-time clocks with calendar, user-selectable recording intervals, and easy data recall using up and down keys.

Explosion-Proof Conduit Sealing Fitting, Turning Radius 2-1/32 Inch, Trade Size 1-1/2 Inch, Connection Type Female, Female, Material Copper-Free Aluminum, Mounting Position Horizontal/Vertical, Enclosure Class I Div 1 and 2 Group C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, Approval UL 886, CSA C22.2, Overall Length 5 Inch, Application Seal Conduits in Vertical or Horizontal, to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames from One Portion of the Electrical System to Another Through the Conduit, Constructional Feature Explosion-Proof

Individual Switches: 15 Amp, 120 Volt/Device Total: 20 Amp, 120 Volt. Decora Three Rocker Combination Switch w/Grounding Lead Screw Terminals and Push-in Wiring. Light Almond.

Category: 15 Amp Decorator Combination Switches

7 Amp UL Fast-Acting Glass Fuse, 5mm x 20mm, 125V, North American Standard, Designed to U.L. 198G and CSA 22.2 N59, RoHS

Category: Electronic Fast Acting Fuses

1-1/4 Amp Time-Delay Midget Fuse, 13/32" x 1-1/2", 500V, TRON, 10,000A Interrupting Rating, Fibre Tube, Nickel Plated Brass Endcaps, For motor control transformers and other circuits with in-rush currents

Category: Time Delay Midget Fuses