"1 inch smurf tube"

Square Box, 30.3 Cubic Inches, 4 Inch Square x 2-1/8 Inch Deep, 1/2 Inch and 3/4 Inch Eccentric Knockouts, Pre-Galvanized Steel, Welded Construction, Metal Stud Bracket and 10-1/2 Inch #12 AWG Solid Ground Wire Pigtail, For use with Conduit

Category: 4" Square Metallic Box Mud Rings

5-In-1 Mini Impact Socket Features Three Square Socket Sizes: 3/4-Inch, 1-Inch And 1-1/8-Inch, And Small And Large Alignment Slots, Alignment Slot To Tighten And Loosen Most Pole Hardware: Pole Steps, Drive Hooks, Eye Bolts, J-Hooks, 13/16-Inch Diameter, 4-1/2-Inch (11.4 Cm) Compact, Hollow Shaft Assists Linemen For Pole Reach Arounds, 7/16-Inch Hex Quick-Change Adapter Included, Reduced Weight And Compact Design Ease Fatigue Among Utility Workers, Fine Tuned Ball Tip Provides Improved Retention, Minimizing Drops, Impact Rated, Color-Coded With Double Lines To Identify Slotted Feature And A Single Line For Socket Size, Replacement Adapter Is Available (Cat. No. Nrhda); Sold Separately

Category: Sockets & Socket Sets

4 Inch Square Box With Snap-On Brackets, 1-1/2 Inch, Sides (6)1/2 & (3) 3/4 Inch Knockouts, Bottom (3) 3/4 & (2) 3/4 Inch Knockouts, Steel, For 2-1/2 Inch & 3-5/8 Inch Studs

Category: 4" Square Metallic Boxes With Brackets

Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 1 Inch, Cable Range 0.590 Inch/15.0mm to 1.000 Inch/25.4mm, Hole Clearance 1.375 Inch/35.0mm, Thread Length 0.78 Inch/19.8mm, IP68 Rating, Nylon, Gray

Category: Straight Non-Metallic Cord Grips

Infrared Heater, Single-Element, 3000 Watt, 208 Volt, Painted Steel Enclosure, With Quartz Tube Element, Bronze Finish

Category: Infrared Heaters

Cast Device Box, Height 6.31 Inch, Width 2.81 Inch, Depth 2 Inch, Capacity 18 Cu Inch, Number of Gangs 1, Number of Hubs 1, Hub Location End, Hub Size 1 Inch, Material Zinc Electroplated/Dichromate/Epoxy Powder Coated Malleable Iron, Shape Shallow, Configuration Type FS, Mounting Hardware (2) Lugs, Approval UL 514A, CSA C22.2, Application Indoor/Outdoor

Category: 1-Gang Malleable Iron FS & FD Device Boxes

Octagon Concrete Box, 47 Cubic Inches, 4 Inch Diameter x 4 Inch Depth, 3/4 Inch and 1 Inch Knockouts, Pre-Galvanized Steel, Drawn Construction, For use with Conduit

Category: Concrete Rings

Standard Radius Elbow, 40 Mil PVC Coated, Pipe Size 3 Inch/78 Metric, Angle 22.5 Degrees, Radius 13 Inch/330.20 Millimeters, Offset 16-1/2 Inch/419.10 Millimeters, Straight End 3-1/2 Inch/88.90 Millimeters, Unbent Length 27.42 Inch/696.48 Millimeters, Hot-Dip Galvanized Rigid Steel, Gray

Category: PVC Coated Rigid Conduit Elbows

Shallow Strut, 12 Gauge, 1-5/8 Inch x 13/16 Inch, Length 10 Feet, Slotted Electro-Galvanized Steel w/ 7/16 Inch x 3 Inch Slots on 4 Inch Centers

Category: Steel Strut with Elongated Holes

4 Inch Octagon Box With 11-1/2 to 18-1/2 Inch Adjustable Stud Bar Hanger, 1-1/2 Inch Depth, Side Knockouts (4) 1/2 Inch, Bottom Knockouts (4) 1/2 Inch, Steel

Category: Octagon Metallic Ceiling Boxes With Hangers

4 Inch Square Box, Welded, Depth: 2-1/8 Inch, Side Knockouts: (4) Cable, (2) 1/2 Inch, (1) 1/2 & 3/4 Inch Eccentric Knockouts, Bottom Knockouts: (1) 1/2 Inch, Material: Steel, Includes VMS Bracket and Non-Metallic Cable Clamps

Category: 4" Square Metallic Box Extension Rings

Lineman's Insulating 4-in-1 Box Wrench, 1/2-Inch, 9/16-Inch, 5/8-Inch and 3/4-Inch Sizes In One Tool; 12 Point Sockets, 9-Inch Overall Length

Category: Ratcheting Box Wrenches

4 Inch Octagon Box, 3-1/2 Inch Deep, Side Knockouts: (2) 1/2 Inch, (2) 3/4 Inch, Cubic Inches: 43, Steel.

Category: Concrete Rings

Gang Box, 1-Gang, Depth: 3-3/16 Inch, Width: 3-19/32 Inch, Height: 2-1/4 Inch, Cubic Inches: 20.3, Non-Metallic, with Captive Nails.

Category: Non-Metallic New Work Switch / Outlet Boxes

Panelboard Enclosure, Galvanized Steel, 88.5 Inch x 20 Inch x 5.81 Inch, NEMA 1, For 85.5 Inch - 88.5 Inch Panels

Category: Panelboard Cans

Square Box, 21 Cubic Inches, 4 Inch Square x 1-1/2 Inch Deep, 1/2 Inch and 3/4 Inch Eccentric Knockouts, Pre-Galvanized Steel, with Armored Cable Clamp (C-3), For Use with Armored/Metal Clad Cable

Category: 4" Square Metallic Boxes

Flush Service Floor Box, 3-Gang, Cubic Inches: 111, Length 5-1/2 Inch, Width 10 Inch, Depth 3-5/8 Inch, 3/4 Inch Conduit Hubs, Cast Iron

Category: Square Recessed Floor Boxes

Device Ring, 1-Gang, 1/2 Inch Offset, Size: 4 Inch x 4 Inch, Depth: 5/8 Inch, Cubic Inches: 4.2, Plastic, For Use with Series 9339/9342/9343

Category: Non-Metallic Plaster Rings

Standard Coupling, Size 1-1/4 Inch, Length 2-1/8 Inches, Outer Diameter 1-63/64 Inch, Inner Diameter 1.535 Inches, Material PVC, Color Gray, For use with Schedule 40 and 80 Conduit

Category: PVC Couplings

Recip Saw Blade, 24 TPI, for 18 Gauge, 6-Inch, 6-Inches long, 3/4-Inch wide, 0.035-Inch thick, 24 teeth per inch

Category: Bi-Metal Reciprocating Saw Blades

Nylon Insulated Ring Terminal, Length 1.20 Inches, Width .53 Inches, Maximum Insulation .136, Bolt Hole 3/8 Inch, Wire Range #22-#16 AWG, Color Red, Tin Plated

Category: Nylon Insulated Ring Tongues

Connector, Straight Squeeze-Type, Size 2 Inches, Clamping Range 2.12 Inches - 2.47 Inches, Length 2.54 Inches, Die Cast Zinc

Category: Straight Squeeze Flex Connectors

Tray Cable Connector, Type Straight, Hub Size 3 Inch, Cable Type Tray Cable, Cable Size 2.13 to 2.44 Inch (No Insert), Diameter 3.82 Inch, Length 3.32 Inch, Constructional Feature Explosion-Proof, Material Electroless Nickel Plated Brass, Application Ordinary, Dry, Wet, Hazardous and Non-Hazardous Location, Approval UL 514B/2225, CSA C22.2, CAN, CSA, Enclosure Type Class I Div 2 Group A B C D, Class II Div 2 Group E F G, Class III Div 2, NEMA 4X, IP66/IP67/IP68, Continuous Operating Temperature -60 to 110 Deg C, Minimum Thread Length 1.63 Inch

Category: Cable Glands - Nickel Plated Brass

Identification Cable Tie - Quadruple Strap Configuration, Natural Polyamide (Nylon 6.6) for Temperatures up to 85 Degrees Celsius (185 F) for Indoor Applications, UL/EN/CSA62275 Type 2/21S Rated for AH-2 Plenum and as a Flexible Cable and Conduit Support, Length of 184.15mm (7.25 Inches), Width of 4.81mm (0.19 Inch), Thickness of 1.41mm (0.055 Inch), Tensile Strength Rating of 220 Newtons (50 Pounds), Marking Pad Size of 63mm (2.48 Inches) x 26.99mm (1.062 Inches), Bulk Package

Category: Cable Tie Marker & Flag Ties