"multiple 12thhncstrtanx2500"

1201 XHHW WHITE 12 AWG XHHW SOLID COPPER 500 FT WHITE

Category: 12 AWG Solid Copper XHHW

10XHHWCSTRGREX5000 10 XHHWC GRE X5000

Category: 10 AWG Stranded Copper XHHW

CONDUIT 3-RIDGID YARD ELBOW

CONDUIT 1-1/2-30DEG-ALUM ELBW

10 THHN/THWN-2 STR TRC GRN/YEL 500FT STRIPE X500'

Category: 10 AWG Stranded Copper THHN

14THHN/THWN-2 CU STRAND ORANGE WITH BROWN AND BLUE STRIPE

Category: 14 AWG Stranded Copper THHN

Decorator Dimmer, 600W, 120V, Multi-Location/Single-Pole, Electronic Low-Voltage, Gloss Finish, Brown.

Category: Low Voltage Decorator Dimmers

Insulated Terminal Blocks, 30 Amp, 12 Circuit

Category: Single Sided Entry Wire Connector Blocks

LEV OSSMD-MAT M/T SEN 2P LT A

Category: Dual Relay Occupancy Sensors

0.1 s to 12.7 m Time Delay & Timing Relays Coincounter

Category: DIN Rail Mount Timing Relays

6-Port Network Interface Unpopulated

Category: Connected Home Combo Phone / CATV Modules

Sheet Metal Screw, # 12 x 2", Pan Head, Phillips/Slotted Combo Drive, Zinc Plated Steel

Category: Slotted / Phillips Combo Pan Head Sheet Metal Screws

3 Inch PVC Conduit, 20 Foot Length, Schedule 80, Gray, Bell End

Category: Straight Schedule 80 Conduit

3 Inch PVC Utility Duct, 20 Foot Length, Type DB-120, Gray, Bell End

Category: Straight Type DB Conduit

2 AWG, THHN/THWN-2, Stranded Copper, 600V, Green, 2500 ft. Reel.

Category: 2 AWG Stranded Copper THHN

Maestro Dual Technology, Dual-Circuit Occupancy Sensor Switch, Applies Exclusive XCT Technology For Minor and Fine Motion Detection, Meets Title 24 Requirements, For Multi-Level Lighting, Color: Hot.

Category: Passive Infrared Wall Switches

M18™ Fuel 7-1/4” Dual Bevel Sliding Compound Miter Saw Kit, Includes: (1) M18™ Fuel 7-1/4” Dual Bevel Sliding Compound Miter Saw (Tool Only 2733-20), (1) M18™ Redlithium Xc5.0 Extended Capacity Battery Pack (48-11-1850), (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812), (1) Clamp, (1) Carbide Tipped Blade, (1) Blade Wrench

Category: Corded Miter Saws

M18 1/2" Brushless Hammer Drill Kit, Includes: (1) M18 1/2" Brushless Hammer Drill (Tool Only) (2902-20), (2) M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-1840), (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812), (1) Carrying Case, (1) Side Handle & (1) Belt Clip

Category: Cordless Heavy Duty Hammer Drills

RadioRA-2 Slide Dimmer, 600W, 120V, Multi-Location, Incandescent/Halogen, Magnetic/Electronic Low Voltage, Wireless, Neutral Wire, Color: Taupe

Category: RadioRA Lighting Controls

RadioRA-2 Slide Dimmer, 600W, 120V, Multi-Location, Incandescent/Halogen, Magnetic/Electronic Low Voltage, Wireless, Neutral Wire, Color: Brown

Category: RadioRA Lighting Controls

Ironworker Tool Belt Set With Quick Release Leather Belt, Bolt Bag, Spud Wrench Holder, Connecting Bar Holder, Multi-Functional Bull Pin Holder, Tension Straps, 3-Pocket Tool Holder, A Pro-Pad, Leather Belt With Side Sizing Adjustment Fits 28-Inch To 36-Inch (71 To 91 Cm) Waist Band, Crafted From Thick Full-Grain Leather And Reinforced With Heavy-Duty Rivets With Washer Backings, All Holders Are Built To Withstand The Toughest Of Job Site Conditions, Every Holder Features Tucked Tunnel Loops That Securely And Comfortably Hang Higher Up On Belts And Harnesses, All Leather Products Are Proudly Cut, Sewn, Riveted, And Packaged Here In The Usa, All Holders Ensure Easy Access To All Your Tools For Enhanced Efficiency And Productivity, Not An Occupational Protective Belt

Category: Tool Belts

Ironworker Tool Belt Set With Quick Release Leather Belt, Bolt Bag, Spud Wrench Holder, Connecting Bar Holder, Multi-Functional Bull Pin Holder, Tension Straps, 3-Pocket Tool Holder, A Pro-Pad, Leather Belt With Side Sizing Adjustment Fits 36-Inch To 44-Inch (91 To 112 Cm) Waist Band, Crafted From Thick Full-Grain Leather And Reinforced With Heavy-Duty Rivets With Washer Backings, All Holders Are Built To Withstand The Toughest Of Job Site Conditions, Every Holder Features Tucked Tunnel Loops That Securely And Comfortably Hang Higher Up On Belts And Harnesses, All Leather Products Are Proudly Cut, Sewn, Riveted, And Packaged Here In The Usa, All Holders Ensure Easy Access To All Your Tools For Enhanced Efficiency And Productivity, Not An Occupational Protective Belt

Category: Tool Belts

Hollow-Shaft Nut Driver With A Standard 5/16-Inch Hex Socket, Heavy-Duty Shaft And Handle To Withstand The Torque For Demanding Applications, Through-Handle, Full Hollow Shaft For Torquing Hex Nuts Onto Threaded Rod Of Any Length, Cold-Forged Steel Wrench-Assist Hex Shaft For Heavy-Duty Applications, Color-Coded And Dome-Stamped Handle For Easy Identification Of Different Sizes, Rare-Earth Magnet Protected By A Brass Inner Sleeve And Strike Plate To Prevent Damage To The Magnet, Cushion-Grip™ Handle For Greater Torque And Comfort, 6-Point Hex To Maximize Driving Contact Area On The Fastener

Category: Magnetic Tip Hollow Shaft Nut Drivers

Hollow-Shaft Nut Driver With A Standard 3/8-Inch Hex Socket, Heavy-Duty Shaft And Handle To Withstand The Torque For Demanding Applications, Through-Handle, Full Hollow Shaft For Torquing Hex Nuts Onto Threaded Rod Of Any Length, Cold-Forged Steel Wrench-Assist Hex Shaft For Heavy-Duty Applications, Color-Coded And Dome-Stamped Handle For Easy Identification Of Different Sizes, Rare-Earth Magnet Protected By A Brass Inner Sleeve And Strike Plate To Prevent Damage To The Magnet, Cushion-Grip™ Handle For Greater Torque And Comfort, 6-Point Hex To Maximize Driving Contact Area On The Fastener

Category: Magnetic Tip Hollow Shaft Nut Drivers