"ab-121212swg the austin co."

Afci /Gfci Outlet Tester Rt310 Detects The Most Common Wiring Faults In Standard, Afci, And Gfci Electrical Outlets Test Afci Devices By Simulating Arc Fault Conditions Test Gfci Devices By Simulating Ground Fault Conditions Capable Of Detecting A Dual-Open Wiring Fault With Simultaneous Open Neutral And Open Ground Wires (Patent Pending Technology) Tester Delivers Clear Visual Indication Of The Wiring Condition At The Electrical Outlet Designed To Test North American-Style Grounded Electrical Outlets In 120V Ac Circuits (Incorporates A Three-Pin Plug) Electrical Plug Is On A 10-Inch (254 Mm) Flexible Electrical Cord To Access Electrical Outlets In Difficult To Reach Locations Low Battery Indicator And Easily Accessible Battery Compartment; Uses 3 X 1.5V Aaa Alkaline Batteries (Included) Powers Off Automatically After Approximately 2 Minutes Of Non-Use To Conserve Battery Life Built To Withstand A 6.6-Foot (2 M) Drop Catiii 135V Safety Rating Measurement Category Iii Is Applicable To Test And Measuring Circuits Connected To The Distribution Part Of The Building’S Low-Voltage Mains Installation The Rt310 Features A Patent Pending Afci Test Method That Is Unique To Klein Tools

Category: Receptacle Testers

15 Amp, 120 Volt, Toggle Framed Single-Pole AC Quiet Switch, Residential Grade, Grounding, Quickwire Push-In & Side Wired, - Ivory

Category: 15 Amp Residential Grade Toggle Switches

Pilot Drill Bit Sizes: 1/4" - 2-1/4"

Category: Hole Saw Pilot Bits

LED Retrofit w/FlexColor for Shoebox/Wallpack: 80 Watt, 10600/10700/10800 Lumens, Color Selectable Temperature: 3000K/4000K/5000K, EX39 Base. Light panel can rotate once the base is tightened to direct light out of the fixture. Enclosed fixture safe and approved for damp locations. Lamps dim to 50% by selecting “LO” on the switch located on the top of the lamp. *DLC Code: PE1R64EU.

Category: Post Top / Site / Wall Pack LED Lamps

1-Gang Toggle Device Switch Wallplate, Standard Size, Material: 430 Stainless Steel, Device Mount - Color: Stainless Steel

Category: 1-Gang Toggle Switch Wallplates

Hex Driver Sizes Include: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, And 9/16-Inch, Impact-Rated Sockets For The Toughest Driving Applications, Flip Sockets Enable Quick Access And Convenience To Common Sizes, Color Coded Hex Sizes For Easy Identification, Store Sockets In Any Order And Orientation On The Shaft, Bit Holding Design Allows The 1/4-Inch Socket Size To Drive Hex Fasteners And Hold Screwdriver Bits, Flip Socket Set Can Quickly Attach To An Impact Driver Or Our 1/4-Inch Quick-Connect Driver Handles For Any Situation, Handle Not Included

Category: Sockets & Socket Sets

2-Gang, 1-Blank 1-Decora/GFCI Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Strap Mount - White.

Category: Blank/Decorator/GFCI Receptacle Plates

Wallplate, F-Connector, 1-Gang, 1-Port, Standard Video Wall Jack, Color: White.

Category: Coax / F-Connector Wallplates

Control Panel Mounting Platform for DG-1 VFD Allows Remote Mounting Of The Keypad On A Large Enclosure Or Remote Panel, The Kit Maintains UL Type 12 Integrity Of The Mounting Location, Adaptors, 3m (10ft) Cable And Mounting Hardware Are Included In This Kit, With This Mounting Arrangement, The Keypad Is Removable From The Panel In A Fashion Identical To A Drive-Mounted Keypad

Category: VFD Cabinet Panel Mounting Kits

SAWZALL® Demolition Blade Set - 5PC, Includes: (1) 6" 14 TPI Metal THE TORCH™ SAWZALL® Blade, (1) 6" 18 TPI Metal THE TORCH™ SAWZALL® Blade, (1) 9" 14 TPI Metal THE TORCH™ SAWZALL® Blade, (1) 9" 5 TPI Wood THE AX™ SAWZALL® Blade, (1) 9" 7/11 TPI Multi-Material THE WRECKER™ SAWZALL® Blade

Category: Heavy Duty Metal Cutting Reciprocating Saw Blades

2-Gang, 1-Toggle 1-Duplex Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: Toggle Switch / Duplex Receptacle Combination Wallplates

CO Contact Cleaner, Application: Cleans Sensitive Electrical/Electronic Equipment, Includes: (1) 14 oz Aerosol Spray Can

Category: Environmentally Friendly Cleaners

Slotted Screw Holding Driver Set Includes 2 Driver Sizes: 3/16-Inch, 1/4-Inch, Slotted Screw-Holding Feature Mechanically Holds Screws To Work Where Stainless Steel Is Required, Essential When Working With Non-Magnetic Screws And Installing Overhead Fixtures, Durable To Start And Drive Screws With 1 Tool, Engage The Screw Holding Feature With Just The Slide Of Your Thumb, Cushion-Grip™ Handle For Greater Torque And Comfort, Helps Prevent Dropping Slotted Screws On The Jobsite, Built To Handle The Tough Jobs With Ease

Category: Screw-Holding Screwdrivers

Carbide Tipped Hole Saw, Diameter: 1-1/8", Chuck Size: 3/8", Conduit Size: 3/4"

Category: Carbide Tipped Hole Saws

Modbox™ Components Easily Interconnect For A Customized Mobile Workstation, Easily Attach And Move The Cup Holder Onto Any System Side Rail With One-Handed Release For Added Convenience, Keep Your Favorite Drink Within Reach With The Klein Tools Modbox™ Cup Holder Rail Attachment, Cup Holder Swivels To Keep Your Drink Upright When The Modbox™ System Is Tilted And In Motion, Flexible Fingers Adjust To Secure Different Sizes Of Drink Containers, Store Beverage Holder Inside The Rolling Toolbox And Medium Toolbox (Cat. Nos. 54802Mb, 54803Mb) With The Internal Rail Accessory (Cat. No. 54818Mb), Sold Separately, Perfect Fit For The Tradesman Tumbler (Cat. No. 55580), Sold Separately

Category: Components Kits

Quad-12 Deep Well Heavy-Duty Impact Flip Sockets Contain 12 Hex Sizes Combined Into 3 Color-Coded Sockets, Spring-Loaded Action Allows For Hands-Free Access To Either Hex Size By Simply Applying Pressure To The Smaller Socket To Compress It Out Of The Way, Heavy-Duty Impact Sockets And Adapters Are Made Of Heat Treated Cold Forged Steel For Long-Lasting, High Torque Applications, Industry-Standard Color-Coded Painted Rings To Quickly Identify Hex Sizes, Deep Well Sockets Are Ideal For Managing Extended Threads, Recessed Bolts, And Confined Spaces, Offering Exceptional Reach And A Reliable Grip, Store The Small (1/4 To 7/16-Inch) And Medium (1/2 To 11/16-Inch) Quad-Sockets On The Long 1/4-Inch Shaft To Efficiently Swap Between Any Combination Of 8 Hex Sizes For Speed On The Job, Specialized Klein Knect™ (M) Square Drive Adapter For The Large Socket Is Compatible With Klein Tools Pass Through Socket Wrench, 3/8-Inch Square Drive Ratchets And Impact Drivers

Category: Sockets & Socket Sets

Carbide Tipped Hole Saw, Diameter: 7/8" (22 mm), Chuck Size: 3/8", Conduit Size: 1/2"

Category: Carbide Tipped Hole Saws

15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, CO/ALR Duplex Receptacle, Straight Blade, Residential Grade, Grounding, Side Wired, Steel Strap, - White

Category: 15 Amp Residential Grade Duplex Receptacles

Impact Duty Driver Bits Are Engineered To Be The Most Durable, Best Fitting Driver Bits On The Market. The Optimized Shockzone Geometry is Unique For Each Tip Type To Provide Up To 30x Longer Life And Absorbs 3x More Torque Vs. Other Impact Bits. The Precise Fit Custom Machined Tip Prevents Stripping And Reduces Wobble While The Custom Alloy76 Steel And Proprietary Heat Treat Process Maximizes Resistance To Wear And Shock. Shockwave Driver Bits Are Built To Deliver Extreme Durability For The Most Demanding Applications. Bullets:designed For Use With Milwaukee Shockwave Magnetic Bit Tip Holders; Precise Fit Custom Machined Tip Prevents Stripping And Reduces Wobble; Custom Alloy76 Steel Maximizes Resistance to Wear and Shock

Category: Square Head Insert / Power Bits

(3) 10 AWG Conductors and (1) 10 AWG Ground, NM-B, Pink (Some Remaining Orange Inventory), Solid Copper Conductor, 90°C Insulation, 600V, 250 ft. Package, Non-Metallic Sheathed Cable *** There is a current initiative among manufacturers for Purple to be the default color for 10/3 NM-B instead of the traditional Yellow. As inventories adjust, customers could receive either color. ***

Category: 10 AWG NM-B

Combo Drill/Tap Bit, Size: 1/4-20NC, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

1-Gang, (1) 1.406 Inch Hole Single Device Receptacle Wallplate, Standard Size, Material: 302 Stainless Steel, Device Mount - Color/Finish: Stainless Steel.

Category: 1-Gang Single Receptacle Wallplates

Conduit Strap, 1-Hole, 3/4 Inch Diameter, Malleable Iron With Hot Dipped Galvanized Finish, For Use With Rigid/IMC/EMT Conduit

Category: Malleable Iron 1-Hole Conduit Straps

Replacement Blades And Bit For The Adjustable Hole Saw With Auto-Set Arms (Cat. No. 53710), The Adjustable Hole Saw With Auto-Set Arms Provides Smooth Cuts From 2 To 7-Inches (5.1 To 17.8 Cm) In Drywall And Ceiling Tile, Features Integrated Gears For Easy Blade Adjustment And Centered Pilot Bit, Replacement Kit Comes With 2 Blades, 1 Pilot Bit, 2 Hex Keys, 4 Washers, 2 End Screws And 1 Set Screw, Using The Large Hex Key, Remove And Replace End Screw, Washers, And Blade, Using The Small Hex Key, Remove And Replace Pilot Bit Set Screw And Pilot Bit, After Replacing, Ensure All Screws Are Fully Seated And Snug-Tight Before Using The Adjustable Hole Saw With Auto-Set Arms To Cut Drywall Or Ceiling Tile

Category: Hole Saw Adapters