"in wall romex splice"

Easy-Twist Winged Twist-On Wire Connectors - Winged Red Large Jar 18-8 AWG APPLICATIONS: Easy-Twist Winged Twist-On Wire Connectors have deep surface ridges to provide better grip. Ergonomic, swept-back wing design provides handling comfort and increased torque ability. Flame retardant UL 94V-2 thermoplastic shell provides excellent electrical insulation. Fixed, precise square wire spring provides secure gripping of conductors. Deep skirt entry provides protection from flashover and shorts. Compact design ensures proper installation, especially in tight spaces. Threaded funnel entry guides the wires into the connector easily. Pre-twisting of wires is not necessary. Zinc-plated springs for low contact resistance. UL 486C Listed Wire Connector. For Copper Wire Only.

Category: Color Coded Twist On Wire Connectors

Vinyl Insulated Ring Terminal, 8 AWG, 5/16" Stud, 300 Volt, Red, 25 Per Pack

Category: Vinyl Insulated Ring Tongues

Compression Lug, Aluminum, 1 AWG, Standard Barrel, 1 Hole, 1/4" Bolt Size, 600 V, Gold Color Code

Category: 1-Hole Aluminum Compression Lugs

500 MCM Parallel "T" Tap Connector With Cover Excellent for tapping off main conductor without cutting due to lay-in feature. Perpendicular tap allows for parallel or "T" tap configuration. Flexible cover allows for either parallel or "T" tap wire entry. Secure snap cover eliminates need for taping. Electro-tin plated for low contact resistance. Rated 600V. Temperature rating 90 degrees C.

Category: Aluminum Tap Lugs

"250 Mcm Cu Compression Lug, 1/2 Bolt Size, Bell End"

Category: 2-Hole Long Barrel Copper Compression Lugs

NSI V1250-2 12" RED VELCRO CA

Category: Velcro Hook & Loop Ties

NSI 4180-SB 4" 18LB CABLE TIE

Category: Non-Releasable Cable Ties

NSI GLC-12HDB HEAVY DUTY DURE

Category: Bare Wire Ground Clamps

250 MCM - 1/0 AWG Main 250-6 Tap With Cover Excellent for tapping off main conductor without cutting due to lay-in feature. Perpendicular tap allows for parallel or "T" tap configuration. Flexible cover allows for either parallel or "T" tap wire entry. Secure snap cover eliminates need for taping. Electro-tin plated for low contact resistance. Rated 600V. Temperature rating 90 degrees C.

Category: Aluminum Tap Lugs

1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 4 AWG - 1/4" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

NSI 2-OT AL DBL LUG

Category: 2-Conductor Aluminum Mechanical Lugs

Jumper Grounding Strap with Single Flexible Braid 190 AMP - 18in. Flexible braid jumper grounding straps are recommended for motion due to expansion, contraction, vibration and operational movement of current carrying members. Manufactured from flat, extra-flexible tinned braid, they are available in a wide variety of sizes and amperages. The ferrules are made from pure electrolytic copper and are tin-plated. Standard mounting holes are 9/16" NEMA spaded holes.

Category: Metallic Grounding Braids

Heavy Duty Direct Burial Ground Clamps for Rebar for 2.5-4in. Pipe Heavy duty direct burial ground clamps for rebar are used to connect bare copper wire to copper water pipe, ground rods and rebar for bonding. Assembled with copper alloy screws and UL Listed for direct burial in earth and concrete. Can accommodate ground wires up to 2 AWG. cULus Listed 467 Grounding and Bonding.

Category: Bare Wire Ground Clamps

NSI GLC-12DB GROUND CLAMP #10

Category: Copper Lay-In Lugs

NSI SC-3/0B COPPER TIN PLATED

Long Barrel TinnedCopperSplice600 MCM Long Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Professional Vinyl Electrical Tape, 3/4 Inch x 66 Feet, Orange, Flame-Retardant, UV Resistant

Category: Color Coding Tape

Professional Vinyl Electrical Tape, 3/4 Inch x 66 Feet, Brown, Flame-Retardant, UV Resistant

Category: Color Coding Tape

Professional Vinyl Electrical Tape, 3/4 Inch x 66 Feet, Gray, Flame-Retardant, UV Resistant

Category: Color Coding Tape

500 Mcm - 4/0 Awg Copper Terminal Lug W/ (1) 1/2" Mtg Hole

Category: 3-Conductor Aluminum Mechanical Lugs

12-10 AWG Vinyl Insulated Ring Terminal 3/8" Stud Vinyl ring terminals are basic tongue ring terminals. Safe and reliable connections because it cannot be disconnected unless the screw is completely removed. Vinyl insulated ring terminals are made of tin-plated copper with brazed seam, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 10 Count WIRE SIZE: 12-10 AWG STUD SIZE: 3/8 " LENGTH: 1.326 WIDTH: 0.59 BRAND EQUIVALENT: Morris Products 01070 Ilsco 44224-B10 Panduit PV1038RL Penn Union R4C38

Category: Vinyl Insulated Ring Tongues

NSI IF16-250-3N-BULK 16-14 AW

Category: Wire Disconnect Adapters

NSI M16-250-3V-S 16-14 AWG MA

Category: Male Non-Insulated Wire Disconnects

Standard Duty Silicon Bronze Ground Rod Clamp for 5/8in. Rod - 25 Count Ground Rod Clamps are made from silicon bronze with 304 stainless steel screws for maximum strength. All standard duty and heavy duty ground clamps are UL Listed for direct burial in earth or concrete. cULus Listed 467 Grounding and Bonding.

Category: Ground Rod Ground Clamps