"lby75 oz-gedney co / neer"

4” Diameter E-Curb Round Kit, Gray. Kit contains 4 curbs, (1) ½ gallon pouch 1-Part Pourable Sealer (2) 10.1 oz cartridges of M-1 Adhesive/Sealant

Category: Adhesive Sealant

Oz-g Tb200 2-in Mall Tb Cond body

Category: Type TB Iron Conduit Bodies

Cold Water Ground Clamp, 1-1/4 Inch to 2 Inch Pipe, Malleable

Category: U-Bolt Ground Clamps

Reducing Bushing, Threaded, Malleable, 1-1/4'' to 1/2''

Category: Iron Alloy Reducing Bushings

Cord Connector W/ Locknut, 1/2 IN Trade, .19-.63 IN Openings, Malleable Iron, Zinc Electroplated

Category: Straight Squeeze Flex Connectors

Conduit Bushing, Insulating, 1 Inch, Threaded, Malleable Iron/Zinc, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

M12™ 20oz. Aluminum Barrel Sausage Style Caulk and Adhesive Gun Kit, Includes: (1) 12V 20 oz Aluminum Barrel Sausage Conversion Kit (48-08-0905), (1) M12™ Lithium-ion Battery Charger (48-59-2401) & (1) M12™ REDLITHIUM™ CP1.5 Battery Pack (48-11-2401), 10 oz. and Quart Adapters Sold Separately

Category: Caulking Guns

OZ GEDNEY FSK10-138 1" THUR WALL CONDUIT SEAL

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-1/8 IN Body Diameter X 3-5/16 IN Overall Length, 1-11/16 IN Turning Radius, 0.75 OZ Sealing Compound Requir

Category: Explosion-Proof Female Vertical Sealing Fittings

OZ-Gedney Clamp Back, Size: 3/4 IN, 1/4 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 2-1/2 IN Length X 1-1/8 IN Width, 3/8 IN Hole, Dimension E: 9/16 IN X 7/16 IN, Third Party Certification: CSA 009795, Applicable Third

Category: Clamp Backs - Iron

OZ-Gedney Type GH Swivel Ground Hub, Conductor Size: 4/0 AWG - 500 KCMIL, Length: 1-7/8 IN, Size: 1-1/4 IN, Malleable Iron, Screws: Steel, Finish: Hot Dip Galvanized, Screws: Zinc Electroplated, 2-11/16 IN Height, Dimension B: 2-1/2 IN, Dimension D: 3/8 IN, Third Party Certification: UL File Number E24264, Applicable Third Party Standards: UL 467, Federal Specification W-F-406E, For Use With Universal Ground Clamps To Connect Grounding Conductors Run Bare, In Armor Or In Conduit

Category: Ground Clamps With Hub

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight 45 DEG Connector With Lug, Size: 3 IN, Connection: Tapered MNPT Hub, Conductor Range: 1 - 4/0 AWG, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 5-5/16 IN Width, Dimension A: 6-1/2 IN, 3-1/16 IN Turning Radius Gland Nut, 1-1/8 IN Thread Length, Third Party Certification: UL File Number E-24264, CSA 9795, Hazardous Locations: Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type KC Center Stopped 4-Screw Clamp Connector, Size: 4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 4-1/16 - 4-7/16 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 4-15/16 IN Length X 7 IN Width, Third Party Certification: UL File Number E-11853, CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Interlocked Metal Clad Cables, Non-Metallic And Service Entrance Cable

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type FDR Deep Cast Device Box, Number Of Outlet: 2, Gray Iron, Size: 3/4 IN, Ridge Top Construction, Cable Entry: (2) 3/4 IN Hubs, 28 CU-IN Capacity, No, 2-15/16 IN Width, 3-1/16 IN Depth, 4-11/16 IN Height, Finish: Zinc Electroplated With Aluminum Enamel, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification A-A-50563, NEMA : FB-1, For Rigid Conduit And IMC

Category: 1-Gang Malleable Iron FS & FD Device Boxes

OZ-Gedney Type KC Center Stopped 4-Screw Clamp Connector, Size: 3-1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 3-23/32 - 4 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 4-13/16 IN Length X 6-1/2 IN Width, Third Party Certification: UL File Number E-11853, CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Interlocked Metal Clad Cables, Non-Metallic And Service Entrance Cable

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 13/32 IN Height, 5-1/4 IN Width, Size: 4 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Gasketed Conduit Locknuts

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3/4 IN, 1-3/4 IN Outside Diameter, Length: 1-5/8 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Pa

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Type AC 90 DEG Center Stopped Squeeze Connector, Size: 2-1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 2-3/4 - 3 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, 7/8 IN Thread Length, Dimension A: 6-1/4

Category: 90 Degree Two Screw Squeeze Flex Connectors

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 1-1/2 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 2-3/4 IN Width, 2 IN Height, Third Party Cer

Category: Malleable Iron Liquidtight Flex Connectors

GPS 8011 GP7500E DF CO 50ST/C

OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 1/2 IN, Conductor Range: 0.156 - 0.25 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Body

Category: Single / Double Weave Strain-Relief Grips

OZ-Gedney Type FS-1 Blank Flat Cast Device Box Cover, Gray Iron, Finish: Zinc Electroplated, Device Box, Screw Mounting, No, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 N

Category: Device Box Covers - Iron

OZ-Gedney BS-S Series Domed Top Design Cover, 3-1/2 - 4 IN Hub, Screw-In Mounting, Pre-Galvanized Stamped Steel, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Used To Cover Malleable Iron Conduit Body Opening

Category: Steel Conduit Body Covers

OZ-Gedney Ground-Tite Type 4Q-L Grounding Liquid Tight 90 DEG Connector With Lug, Size: 3/4 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 2-1/8 IN Width, Dimension A: 1-11/16 IN, Dimension C: 1-1/2 IN, 1-5/16 IN Turning Radius Gland Nut, 1/2 IN Thread Length, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Hazardous Locations: Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors