"gs-8"

Werner; Twin Stepladder; Series T400, Multi-use, Type Iaa, Duty Rating; Ladder Height: 4 Ft; Base Size: 21-1/4 In; Material: Aluminum; Load Capacity: 375 Lb; Spread Size: 36-1/4 In; Rail: 3-1/8 In Wide; Flange: 1-1/8 In Wide; Approx. Cu. Ft. Per Unit: 5; Top Of Section: 8-1/4 In X 14 In; Step Width: 3 In

Category: 300 Pound Rated Twin Stepladders

Keyed, Category 6A, RJ45, 10 Gb/s, 8-position, 8-wire universal module. Red.

Category: Snap-In Cat 6A Jack Inserts

Crimping Flip Top Tool Head, Jaw Opening: 2", Crimping Force: 15-Ton, Crimping Capacity : 8 AWG - 1500 KCMIL (MCM) Color Coded Copper Lugs and Splices, 8 AWG - 1250 KCMIL (MCM) Aluminum Lugs And Splices; Includes: 3/8" Male Screw-Type Coupler; Weight: 11.4 lbs.

Category: Hydraulic Crimping Tools & Cutting Heads

THB KN8-8R-D NYLON RING 8 AW

Category: Nylon Insulated Ring Tongues

Open-End Wrench Set, Includes: 1/4-Inch and 5/16-Inch, 3/8-Inch and 7/16-Inch, 1/2-Inch and 9/16-Inch, 9/16-Inch and 5/8-Inch, 11/16-Inch and 3/4-Inch, 13/16-Inch and 7/8-Inch, 15/16-Inch and 1-Inch,

Category: Combination Wrench Sets

BOLT,EYE,3/8-16 THREADERC SLEB375 BOLT,EYE,3/8-16 THREAD

Category: Eye Bolts

Eaton B-Line series beam clamps, 1850 lb, Used with 1 - 5/8" high channel, 1200 lb load capacity, Safety factor 5, 3/4" beam thickness, Aluminum

Category: Strut-to-Beam Clamps

Category 6A, RJ45, 10 Gb/s, 8-position, red, 8-wire universal shielded black module with integral shield.

Category: Snap-In Cat 6A Jack Inserts

Malleable Split Ring Hanger For Copper Tube, Outer Diameter: 7/8", Copper Tube Size: 3/4", Material: Cast Iron

Category: Conduit Support - Split Ring Type

M18™ 3/8" Impact Wrench with Friction Ring, Includes: (1) M18™ 3/8" Impact Wrench with Friction Ring (2658-20) & (1) Belt Clip ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Heavy Duty Impact Wrenches

Eaton B-Line series springless channel nut, 0.85" H x 1.3750" L x 1.23" W, Steel, Electro-plated, 5/8"-11 bolt size

Category: Strut Channel Spring Nuts

Loop Hanger, 1-1/4 Inch, Rod Size 3/8 Inch, Steel/Copper Plated, Recommended For The Suspension of Stationary Copper Pipe

Category: Strut Channel Clevis Hangers

OZ-Gedney Spec 5 Type X Conduit Body, 3/4 IN Hub, Length: 6-1/8 IN, 3-1/8 IN Width, 1-5/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, Third Party Certification: UL File Number E-18095, CSA LR-

Category: Type X Iron Conduit Bodies

Driving Stud for Sectional Ground Rods, 5/8", Steel, 1-3/4" Long

Category: Ground Rod Drive Studs

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-5/8 IN Body Diameter X 4-3/8 IN Overall Length, 2-7/16 IN Turning Radius, 3.75 OZ Sealing Compound Required, 1/8 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 3/8 IN (1/2 IN KO), Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 1-1/8 IN Width, 1-1/2 IN Height, Th

Category: Malleable Iron Liquidtight Flex Connectors

Control Center Mounting Hardware, Type Bolt, Hex Nut, Washer, Used On ACSEW Cast Control Center, Bolt Size 3/8 Inch-16 TPI x 1-1/4 Inch, Hex Nut Size 3/8 Inch-16 TPI, Washer Size 3/8 Inch

Category: Enclosure Mounting Bracket Kits

20V Cross line 2 Spot Combo Laser Bare Kit, Green Laser, Accurate Readings Within 1/8 in. At 30 ft., Includes: 2-Spot Green Line Laser, Drop Ceiling Bracket, Target Card & TSTAK® Case

Category: Laser Levels

Polypropylene-Insulated Ferrule, Total Length 1.063 Inches/27mm, Pin Length .708 Inches/18mm, Pin Diameter .181 Inches/4.6mm, Base Diameter .295 Inches/7.5mm, Wire Range 8 AWG/10.00mm2, Color Red, Copper, Tin Plated

Category: Single Insulated Ferrules

APP KPCHL1010J548 LTG HID ENC

Category: Marine/Wet Location Fixtures

CHANNEL 1 5/8-IN. X 1 5/8-IN. 9/16-IN. X 7/8-IN. SLOTTED HOLES 14 GA. 240-IN

GEE PXCYL/8/SM/LES/90/35/KDIM

Grounding Bushing, 2-1/2 Inch, Threaded, Insulated, 1/0 to 8 AWG, Rated 105° Celsius, Malleable Iron, Aluminum Lug, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Box Support. Type: Adjustable Far Side (Lock On), For use with 2-1/2", 3-1/2" & 4" Studs

Category: Metallic Box Supports