"twhs-312-6 industries, llc"

NSI IPLD600-16 600 MCM - 6 AW

6 AWG Bare Ring 1/2" Stud - 15 Per Pack

NSI IPLDS350-12 350 MCM - 6 A

NSI IPL3/0-4C 3/0-6 AWG POLAR

NSI R6-50N-BULK 6 AWG NYLON I

NSI WW-716-6 7MIL TAPE BLUE

Nsi Gp-350wc 350-4/0 Main tap 350-6

Category: Aluminum Tap Lugs

NSI 5300MH 6" MTG. BLACK CABL

Category: Non-Releasable Cable Ties

Professional Vinyl Electrical Tape, 3/4 Inch x 66 Feet, Blue, Flame-Retardant, UV Resistant

Category: Color Coding Tape

Winged Wire Connector, Red, Easy Twist (N-Type), 22-6 AWG, Bulk Box of 10,000

Category: Color Coded Twist On Wire Connectors

NSI HN-6 BRONZE NUT 3/8

NSI SSBW-6 STAINLESS STEEL BE

NSI ISE64 "6 STR- 4 SOL INSUL

NSI ISE63 6 STR - 4 SOL INSUL

insulation Piercing Connector 4/0-2 Main, 2/0-6 Tap

Category: Splices - Insulation Piercing

NSI 530MH 6" MTG. NAT. CABLE

Category: Non-Releasable Cable Ties

2Wire Polaris Grey Insulated Connector for6-14 AWG Fine-Stranded Flexible Copper Conductors, Dual Sided Entry Polaris GreyInsul-Tap Connectors are suitable for connectingtwo wires, designed for use with fine-stranded flexible copper conductors.Excellent for use in motor connect/disconnect applications. Abrasion and chemical resistant. Will not support combustion. Cold temperature rated to -45 degrees Celsius, rated 600 volts.

Category: Single Sided Entry Wire Connector Blocks

NSI SLW-6 BRONZE LOCKWASHER 3

NSI IPLMD2505 NSIIPLMD2505

Category: Dual Sided Entry Wire Connector Blocks

10 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

Service Post Connector - One Wire Type 6 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

Category: 2-Wire Service Post Connectors

Vinyl Insulated Locking Spade, 12-10 AWG, #6 Terminal Size, 300 Volt, Yellow, 500 per Pack

Category: Vinyl Insulated Standard Fork Terminals

Nylon Insulated Ring Terminal, 22-18 AWG, #6 Stud, 600 Volt, Red, 100 per Pack

Category: Nylon Insulated Ring Tongues

8 Wire Polaris 250 MCM-6 AWG Uninsulated Multi-Cable Connector Polaris Uninsulated Multi-Cable Connectors are made from 6061-T6 aluminum alloy and are plated for corrosion resistance. They are stacked in one hole increments, up to 14 holes and are suitable for use on wire from #4 AWG to 750 MCM. UL Listed 486B Wire Connector. AL9CU. Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Non-Insulated Multi-Tap Connectors