"354801-GY"

GFCI Duplex Receptacle, Tamper Resistant, 15 Amp, 125 Volt, Self-Test, 14 - 10 AWG, Back and Side Wired, NEMA Configuration 5-15R, Two Pole, Three Wire, Gray Polycarbonate

Category: 15 Amp Specification Grade GFCI

15A Hospital Grade Duplex Receptacle, 5-15R, Gray

Category: 15 Amp Hospital Grade Duplex Receptacles

Rhino-Hide 49 Series Single Pole Female Receptacle (Color Coded Metal Housing, Contact, & Dust Cap), Double Hole Bus Bar, Industrial Grade, 313MCM-777MCM Cable, 1000 Volt, 1135 Amp Max - GRAY

Category: Female Panel Mount Receptacles

Eaton ArrowLink hospital grade receptacle, Modular receptacle, 20 A, 125V, Extra heavy-duty hospital grade, Modular connector, Flush{Z38305}, Two-pole, Duplex, Nylon, Gray{B44104}, 5-20R, Receptacle{E1412}, 3{Z522}, Duplex{M9318}

Category: 20 Amp Hospital Grade Duplex Receptacles

Http://www.wattstopper.com/products/details.html?id=240&category=37&type=commercial

Category: Passive Infrared Wall Switches

GRAY TERM BLCK END CVR

Category: Terminal Block End Sections

25AMP 600V FDTHRU TERM BLCK

Category: 5.2mm Feed Through & Ground Terminal Blocks

GFCI Receptacle, Self-Test, 20 Amp, 125V AC, 2-Pole, 3-Wire, NEMA Configuration: 5-20R, Flush Face, Back & Side Wired, Color: Gray, Commercial Standard

Category: 20 Amp Commercial Grade GFCI Receptacles

Flush with floor, cast aluminum cover assembly available in brushed aluminum (AL), black (BK), and gray (GY). Maximum load capacity 3,000 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Black

Category: Square / Rectangle Recessed Box Covers

Duplex Receptacle, 15 Amps, 125 Volts, 2-Pole 3-Wire Grounding, Gray, Industrial Grade

Category: 15 Amp Heavy Duty Specification Duplex Receptacles

20A Commercial Grade Duplex Receptacle, 5-20R, Gray

Category: 20 Amp Commercial Grade Duplex Receptacles

Hubbell Wiring Device Kellems, Straight Blade Devices, Receptacles, single, Industrial Grade, 2-pole 3-wire Grounding, 20a 125v, 5-20r,gray, Single Pack

Category: 20 Amp Straight Blade Receptacles

BUSS FUSEBLOCK

Category: Class CC Fuse Blocks

35AMP 600V FDTHRU TERM BLCK

Category: 6mm Feed Through & Ground Terminal Blocks

For use with 10" [254mm] diameter hole. Cover and stem are pre-assembled together. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB)

Category: Recessed Floor Box Service Fittings

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Black

Category: Square / Rectangle Recessed Box Covers

For closing open end of DS4000B Raceway Base. Has two 3/4" and 1" trade size KOs. Designer Gray

Category: Large 2-Piece Metallic Raceway End Fittings

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

Halogen Lampholder, Compatible with GX-5.3 & GY-6.35 Base.

Category: Miniature Base Bi-Pin Incandescent & HID Lampholders

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Anodized Aluminum

Category: Square / Rectangle Recessed Box Covers

Eaton lighting color change kit, Accell hour timer (1, 3, 6, 9, 12), Gray