Search results

Spiral wrap, offers abrasion protection for wires, cables, hoses and tubing, .19" (4.8mm) x 100', weather resistant polyethylene, black.

Category: Spiral Wrap - White

Conductor identification label, 0.79" (20mm) marker diameter, Earth (ground) symbol, polyester adhesive, black/white, 10 labels/card, 10 cards/package.

Category: Conductor Identification Labels

Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Green, 14m.

Category: Category 6 Patch Cords

Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Off White, 33ft.

Category: Category 6 Patch Cords

Shielded copper cable, category 6A F/UTP, plenum (CMP), 4-pair, conductors are 23 AWG with PE insulation, twisted in pairs, separated by an integrated pair separator, all four pairs surrounded by an overall metallic foil shield and protected by a plenum j

Category: Category 6A Plenum Cable

Category 6A Performance, 28AWG, F/UTP Patch Cord, CM/LSZH, Blue, 11m.

Category: Category 6 Patch Cords

Dot Matrix, Self-Lam Label, Vinyl free, 2.00" W x 2.44" H, 0.75" POA, White

Category: Self-Laminating Labels

Category 6A, 10 Gb/s S/FTP patch cord with TX6A™ 10Gig™ Modular Plugs on each end. Red, 15 ft.

Category: Category 6 Patch Cords

Category 6A Performance, 28AWG, F/UTP Patch Cord, CM/LSZH, Orange, 7m.

Category: Category 6 Patch Cords

Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Red, 17ft.

Category: Category 6 Patch Cords

Compression Lug, Copper, 1-Hole, Standard Barrel with Window, Narrow Tongue, 300 kcmil Cable, 3/8 Inch Stud Hole

Category: 1-Hole Copper Compression Lugs

Category 5e performance, 28 AWG UTP patch cord with Pan-Plug™ Modular Plugs on each end. Black. 6 ft.

Category: Category 5e Patch Cords

Push-Barb Cable Tie Mount, Maximum Panel Thickness of 0.13” (3.2mm) and a Panel Hole of 0.25” (6.4mm), Heat Resistant Nylon 6.6, Black, Package of 1000

Category: Non-Releasable Cable Ties

Pan-Ty® locking clamp tie, intermediate cross section, #8 (M4) screw, 6.1 (155mm) length, weather resistant nylon 6.6, black, standard package.

Category: Screw Mount Cable Ties

Inside corner fitting for use with LDPH3 and LDS3 raceway, White, ABS, Length 1.83 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Compression Lug, Copper, 1-Hole, Flex, Long Barrel, #8 AWG, 1/4 Inch Stud Hole

Category: 1-Hole Long Barrel Copper Compression Lugs

Wire Marker Card, Vinyl Cloth, Half, '3'

Category: Wire Marker Cards

Wire Marker Card, Vinyl Cloth, '1-10'

Category: Wire Marker Cards

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Nylon 6.6 material, it's ideal f

Category: Non-Releasable Cable Ties

Corrugated loom tubing slit wall, .75" (19.1mm) x 100' (30.5m), polyethylene, yellow.

Category: Split Wall Loom Tubing

1/3 insert with one 15-pin DB connector mounted to a printed circuit board, terminates on site, SVGA capable, international gray.

Category: Multimedia Outlet System Wallplate Inserts

Cable management double waterfall base. Used to maintain 1.75" (101.6mm) bend radius control vertically when transferring cable off either side of ladder rack rung. Mounts to ladder rack rung with standard cross section cable ties (included).

Category: Rack Cable Management Devices

Replacement labels for Mini-Com® M6 Style Modular Faceplate Patch Panels with label/label covers (CPPL24M6BLY) and NetKey™ Molded Patch Panels. Labels are pre-printed1 -24 on one side and write-on area on reverse side.

Category: Permanent Labels

2 fiber OS2 patch cord, LC push pull to LC push pull, low smoke zero halogen (LSZH) rated, 16mm jacket, Standard IL 27 meters

Category: Fiber Optic Patch Cords