Search results

Cable Tray Clamp, For Rigid, IMC & EMT, 1-1/2", Malleable Iron, Tray Bond, Conduit at Right Angle to Tray

Category: Conduit To Cable Tray Adapters

Conduit Body, Type TB, 1 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type TB Iron Conduit Bodies

Conduit Body, Type LL, 1 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LL Iron Conduit Bodies

Grounding Bushing, 4 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 6 AWG - 250 MCM, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

3-1/2" Pull Box Fittings, Weatherproof, Malleable Iron End Units, Includes: Copper Ground, Pressure Ring, and Type A Insulating Bushing. For Use with Rigid/IMC Conduit.

Category: Iron Rigid Conduit Pull Box Fittings

Grounding Bushing, Insulated, Threaded, 1 Inch, Set-Screw Connection Type, Rated 150° Celsius, Malleable Iron/Zinc Bushing, Copper Lay-In Lug 14 - 4 AWG, Phenolic Insulator, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Grounding Bushing, Insulated, Threaded, Size: 2-1/2 Inch, Cable Range: 8 - 2/0 AWG, Aluminum

Category: Threaded Ground Bushings

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 2 IN, 3-3/8 IN Outside Diameter, Length: 2-7/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Pa

Category: Iron Rigid Conduit Three Piece Couplings

Oz-g 108 3-in Mall Grnd Lknut

Category: Grounding Conduit Locknuts

Oz-gedney T100a Type T Conduit Body, 1 In Hub, Length: 6-3/4 In, 2 In Height, Die-cast Copper-free Aluminum, Finish: Aluminum Enamel,

Category: Type T Aluminum Conduit Bodies

Conduit Body, Type: T, Size: 3/4 Inch, Form 85, Aluminum, For Use With Rigid/IMC Conduit

Category: Type T Aluminum Conduit Bodies

Conduit Clamp, 1 Inch, Type: UPC-G, Parallel, Malleable Iron, For Use With Rigid/EMT/IMC Conduit

Category: Malleable Iron EMT Parallel Type K-Clamps

OZ-Gedney BS-A Series Domed Top Design Cover, 1/2 IN Hub, Screw-In Mounting, Stamped Copper-Free Aluminum, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 5

Category: Aluminum Conduit Body Covers

OZ-Gedney Type EFL Concrete Slab Electroform 90 DEG Conduit Insert, Size: 1 IN, Malleable Iron, Finish: Zinc Plated, Dimensions: 2-1/2 IN Base Diameter X 2-15/16 IN Base To Conduit Center X 3-11/16 IN Height, 3-13/16 IN Turning Radius, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA: C22.2 No.18, Federal Specification W-F-408E, For Concrete Slabs 6 IN Thickness And Up, Threaded Rigid Conduit And IMC

Category: Iron Rigid Conduit Elbows

OZ-Gedney Type BLG Insulated Grounding Bushing, Size: 3 IN, Malleable Iron Body, Stainless Steel Screws, Finish: Zinc Plated, Connection: Set-Screw, 150 DEG C, 4 IN Outside Diameter, 1 IN Width, 14 - 4 AWG Grounding Wire, 2-1/2 IN Turning Radius

Category: Threaded Ground Bushings

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 5/16 IN Height, 2-3/8 IN Width, Size: 1-1/2 IN, 11-1/2 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Pa

Category: Gasketed Conduit Locknuts

OZ-Gedney Type EYD Vertical Drain/Sealing Fitting, Size: 1 IN, Malleable Iron Body, Seal Cover And Filler Plug, Stainless Steel Drain/Breather, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-3/4 IN Body Diameter X 4-3/8 IN Ove

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight 45 DEG Connector With Lug, Size: 1/2 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 1-7/8 IN Width, Dimension A: 1-3/4 IN, 1-3/16 IN Turning Radius Gland Nut, 9/16 IN Thread Length, Third Party Certification: UL File Number E-24264, CSA 9795, Hazardous Locations: Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 2-1/2 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 4-1/8 IN Width, 3 IN Height, Third Party Certification: UL

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type DUX Duct Sealing Compound, Size: 1 LB, Gray, Third Party Certification: UL R-15320

Category: Adhesive Sealant

OZ GEDNEY FSK10-138 1" THUR WALL CONDUIT SEAL

Features: Physical Dimension 1 3/4 In Width X 1 7/8 In Height, Standard: Ul 514b, Csa C22.2, NEMA: Fb-1, Federal Spec: W-f-406e, Size: 1in, Material: Malleableiron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated

Category: Malleable Iron Liquidtight Flex Connectors

Grounding Bushing, 1-1/4 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Thermoplastic Insulator Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Grounding Bushing, Insulated, Size: 1 1/2 Inch, Material: Malleable Iron, Lug: Aluminum, Threaded, Maximum Temperature Rating: 150° Celsius, For Use With Rigid/IMC Conduit, With Aluminum Lug, Outside Diameter: 2 5/16 Inch, Width: 11/16 Inch, Grounding Wire Size Minimum: 14 Wag

Category: Threaded Ground Bushings