Distribution & Terminal Blocks

ILS PDC-11-2/0-2 AL MEC 2/0-1

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

ILS PBTS-6-1/0-F INS 1/0-14 1

Category: Single Sided Entry Wire Connector Blocks

Primary device for easy assembly between a wide range of conductors to perform electrical power distribution. Single Pole Dist. Block UDF9C1000AL, Aluminum.

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Power Distribution Block, Dual Rated, Line Conductor Range 2/0-14, Load Range 2/0-14, 2 Ports Per Pole Line Side, 2 Ports Per Pole Load Side, 3 Pole, UL, CSA

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

Insulated Multi-Cable Stacked Connector Block, Wire Entry Either Side, 600V, Number of Ports: 4, Wire Range: 3/0 AWG - 6 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Compact 4-Pole connecting device with an ergonomic design for maximum power in minimum space. Four Pole Distribution Block TDL-400A.

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 6, Wire Range: 600 MCM - 6 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

NSI IPL3/0-3B 3/0-6 AWG POLAR

Category: Single Sided Entry Wire Connector Blocks

Nimbus Insulated Aluminum Multi-Tap Connector, Conductor Range 750-250, 8 Ports, Dual Sided Entry, Tin Plated, UL, CSA

Category: Dual Sided Entry Wire Connector Blocks

Power Distribution Blocks, Connector Blocks Series, Line Side (2) 2/0 - 14 AWG, Load Side (6) 2 - 14 AWG, 350 Amps Per Pole

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

8-Port Insulated Multi-Tap Connector, Dual Sided Entry, Transparent Cover, Conductor Range: 350 kcmil-6 AWG, L: 9.404", W: 2.578", H: 2.396"

Category: Dual Sided Entry Wire Connector Blocks

5-Port Insulated Multi-Tap Connector, Single Sided Entry, Transparent Cover, Conductor Range: 600kcmil-4, L: 6.44", W: 2.28", H: 3.04"

Category: Single Sided Entry Wire Connector Blocks

Power Distribution Block, Dual Rated, Line Conductor Range 500-4, Load Range 2-14, 1 Port Per Pole Line Side, 6 Ports Per Pole Load Side, 3 Pole, UL, CSA

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Aluminum Multi-Tap Connector, Dual Rated, Conductor Range 4/0-6, 8 Ports, UL

Category: Non-Insulated Multi-Tap Connectors

6 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7U and Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

Ideal; Terminal Strip; Wire Size: 22 - 6 Awg; Spacing: 0.625 In; Amperage Rating: 60 Amp; Voltage Rating: 600 V; Material: Nickle-plated Brass; Number Of Circuits: 12; Torque Rating: 20 In-lb; Terminal Screw Size: 12

Category: Terminal Strips

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 3, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

NSI IPLG3/0-4 3/0-6 MULTI TAP

Category: Single Sided Entry Wire Connector Blocks

10 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Multi-Tap Connector, Insulated, Clear, 2-Port, 10 AWG - 350 MCM, 1-Side Entry, Aluminum Body

Category: Single Sided Entry Wire Connector Blocks

NSI IPLD500-4B 500 MCM - 4 AW

Category: Dual Sided Entry Wire Connector Blocks

2-Port Insulated Multi-Tap Connector, Dual Sided Entry, Transparent Cover, Conductor Range: 250kcmil-6, L: 2.17", W: 2.13", H: 2.17"

Category: Dual Sided Entry Wire Connector Blocks

ILS PBTS-6-250-F INS 250-6 4/

Category: Single Sided Entry Wire Connector Blocks

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 10, Wire Range: 350 MCM - 6 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks