"dcbl770b black"

The right angle base in black accepts a flat cable width of 1.0" (25.4 mm) and is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor environments and comes in packages of 100.

Category: Cable Tie Bases

The masonry push barb cable tie mount in black requires a 0.19" (4.8 mm) hole. It is made of impact-modified weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for outdoor environments

Category: Cable Tie Bases

The CLT harness cable tie mount in black is applied with a push barb and is 0.47" (11.7 mm) in height. It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in indoor and high-temperature env

Category: Cable Tie Bases

Masonry push barb cable tie mount, standard, .25" (6.4mm) hole, black, standard package.

Category: Cable Tie Bases

Cable Tie Mounting Base, 4-Way, Self-Adhesive/Threaded Mount, .19 IN W Tie, Nylon/Polyamide 6.6, Black

Category: Cable Tie Bases

The adhesive mount in black is mounted with acrylic adhesive tape and measures 1.12" x 1.12" (28.5 mm x 28.5 mm). It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for o

Category: Cable Tie Bases

The cable tie mount is black and is applied with a #6 (M3) screw. It is 0.51" (13.0 mm) long and made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with Super-Grip® miniature adhes

Category: Cable Tie Bases

The cable tie mount in black is installed onto a 0.75" (19.1mm) stud. It is made of impact-modified weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of

Category: Cable Tie Bases

LOC10-14XECMOCF90 UV UVR5 BK 1000/BOX

Category: Cable Tie Bases

The CLT harness cable tie mount in black is applied with a push barb and is 0.54" (13.7 mm) in height. It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in indoor and high-temperature env

Category: Cable Tie Bases

Flat cable mounting system, FCPI plate, 1" (25.4mm) cable width, black, standard package.

Category: Cable Tie Bases

Cable Tie Fir Tree Push Mounts Panel Hole Diameter of 0.25 to 0.28" (6.3 to 7.1 mm), Made of Heat-Stabilized Nylon 6.6, For Use In Indoor Environments and With Miniature, Intermediate and Standard Cable Ties, Package of 500

Category: Cable Tie Bases

Cable Tie Fir Tree Push Mounts Panel Hole Diameter of 0.34" to 0.36" (8.8 to 9.3 mm), Made of Heat-Stabilized Nylon 6.6, For Use In Indoor Environments and With Miniature, Intermediate and Standard Cable Ties, Package of 200

Category: Cable Tie Bases

The cable tie mount in black is applied with a #6 (M3) screw and is 0.43" (10.9 mm) wide. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages

Category: Cable Tie Bases

The cable tie mount in black is applied with a #8 (M4) screw and is 0.61" (15.5 mm) wide. It is made of weather-resistant polypropylene for outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases

The 4-way adhesive backed cable tie mount in black is mounted with rubber adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of ABS plastic. It is used with miniature, intermediate, and standard cable ties. It is designed for indoor environm

Category: Cable Tie Bases

The 4-way adhesive backed cable tie mount in black is mounted with acrylic adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of weather-resistant ABS plastic. It is used with miniature, intermediate, and standard cable ties. It is designed

Category: Cable Tie Bases

The screw applied mount for Tak-Ty hook and loop cable ties in black uses #6 (M3) screw. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with HL

Category: Cable Tie Bases

The extra heavy cable tie mount in black is applied with a 1/4" (M6) screw. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 10.

Category: Cable Tie Bases

Cable Tie Fir Tree Push Mounts Panel Hole Diameter of 0.34 to 0.36" (8.8 to 9.3 mm), Made of Heat-Stabilized Nylon 6.6, For Use In Outdoor Environments and With Miniature, Intermediate and Standard Cable Ties, Package of 1000

Category: Cable Tie Bases

The extra heavy cable tie mount in black is applied with a #8 (M4) screw. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 10.

Category: Cable Tie Bases

The cable tie mount in black is installed onto a .25" (6.4mm) stud. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases

The fir tree push mount assembly is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 1

Category: Cable Tie Bases

The lashing tie mounting clip in black is made of weather-resistant nylon 6.6. It is 1.38" long x 0.67 wide (35 x 17 mm). It is applied with a 1/4" (M6) screw and is designed for indoor and outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases