"w1b50-3-wh westgate mfg inc"

Non-Metallic, 1-1/4" Bend Radius Flat Elbow, 2900 Series. Size: 3-1/2" Length. PVC, Fog White.

Category: 1-Piece Non-Metallic Raceway Elbows

Non-Metallic, Reducing Connector, 2800 & 2700 Series. Size: 3/4" Width. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

For transitioning from MXN2A08 Corner Drop to a horizontal run of 5400TB Series Raceway to the left. Ivory

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

For dropping cables from ceiling into the raceway. Has 1/2" and 3/4" concentric trade size KOs. Includes PN153R Reducer Adapter for use with PN03 Series Raceway.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Tee Cover, 1" Bend Radius, PVC, Ivory

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Non-Metallic Surface Raceway, One-Piece, Hinged, Electric Ivory, Type LD3, .77 Inch Wide x .46 Inch High x 6 Foot Long

Category: 1-Piece Non-Metallic Raceway

Entrance end fitting. Conduit breakouts of 1/2", 3/4", 1", and 1 1/4" which allows entry from ceiling or wall. Electric Ivory.

Category: 1-Piece Non-Metallic Raceway End Fittings

WMD 2900L8-FW

Category: 1-Piece Non-Metallic Raceway

2900 Series Radiused Interior Elbow. Makes right angle turns around internal corners of 2900 Series Raceway running at right angles. Maintains 1 1/4" (32mm) bend radius when installing UTP and fiber optic cable. Finish - Ivory

Category: 1-Piece Non-Metallic Raceway Elbows

LD Low Voltage Single Channel Surface Raceway, One-Piece, Hinged, Electric Ivory, Type LD3, .77 Inch Wide x .46 Inch High x 8 Foot Long

Category: 1-Piece Non-Metallic Raceway

One Piece Surface Raceway, 1-1/4", 8.0 ft Long, PVC, Ivory, 160ft/Carton

Category: 1-Piece Non-Metallic Raceway

Makes right angle turns in 2900 Series Raceway on same surface.

Category: 1-Piece Non-Metallic Raceway Elbows

PN 3 Series External Elbow. For right angle turns around external corners. Finish - Fog White

Category: 1-Piece Non-Metallic Raceway Elbows

Pre-assembled 4in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Orange, 1 piece.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Optional split cover for the horizontal right angle fitting FRRA4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 1-Piece Non-Metallic Raceway Elbows

Used to limit the bend radius of the cable to 2 (50.8mm) when exiting from 4x4 FiberRunner®Channel or a 4x4 FiberRunner®Horizontal Tee.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Optional split cover for the horizontal tee fitting FRT4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Transition fitting from TG to T-45. Provides a tee transition from TG raceway to T-45 and LD series size 5 and 10. Use with RF5X3 reducer fitting to transition to LD series size 3.

Category: 1-Piece Non-Metallic Raceway Tee Fittings