"ab-6624st the austin co."

Made of B-500 repositionable vinyl cloth material, our WM series wire markers are able to withstand moderate heat, oil and dirt. Labels hold tightly to the wire due to their high adhesion properties and can be re-used with ease if repositioning is required. Available in black on matte white background. Card-mounted wire markers are sold as individual characters or as consecutive numbers and letters.

Category: Wire Marker Cards

Installation tool for use with 0.38"(9.5mm), 0.50"(12.7mm), and 0.63"(15.9mm) widths of Panduit® Pan-Steel® Strapping.Tensions, cuts strapping, and secures the buckle tab. Lever cut off.

Category: Cable Tie Tools

Traditional Floor Cover For Use With Leviton 5" Poke Through Floor Box (PT500) Only, Accommodates All Standard Decora Receptacles, The Flip Lids Are A Double-Hinge Design That Can Open 180 Degrees And Lay Flat, Also Includes Metal Subplate And Pre-Assembled Gasket And Mounting Screws, And Cover Mounting Screws, Gray

Category: Round Recessed Box Covers

Relay Sockets & Hardware Mounting Bracket Aluminum 15/16

Category: Current Sensor / Switch DIN Rail Mounting Adapters

Replace The Numbers, Letters And Characters You Need In Your Porta-pack Books With Our Convenient Ten Pack Refills. Made Of Durable B-500 Vinyl Cloth Materialand Available In Over 250 Different Refill Packs. Each Refill Pack Contains 10pages.

Category: Wire Marker Cards

ONE-KEY™ Bluetooth Tracking Tag, Tracked by ONE-KEY™, The Industry’s Largest Tracking Network, Glue, Screw, Rivet, Or Zip Tie To Any Valuable Tool Or Piece Of Equipment, Built-In Speaker Helps You Identify And Find Equipment Within 50 Feet, Even If It Cannot Be Seen, Up to 300 Ft Bluetooth Range, Built-In 3 Year Battery, Weather, Dust, & Impact-Resistant, Pack of 10 Tags

Category: Cordless Tool Equipment Trackers

Heavy Duty Flex Work Pants, Lightweight, Broken-In Fabric Provides Instant Comfort Off-The-Shelf, Built-In Stretch Allows Fabric To Move With You, (6) Total Pockets: (2) Wide Front Pockets, (2) Wide Rear Pockets, (1) Right Leg Tool Pocket, (1) Utility Pocket Inside Front-Right Pocket, Size: 40W/32L, Gray

Category: Work Pants

Made Of B-500 Repositionable Vinyl Cloth Material, Our Cpcwm Series Combinationpack Wire Markers Are Able To Withstand Moderate Heat, Oil And Dirt. Labels Hold Tightly To The Wire Due To Their High Adhesion Properties And Can Be Re-used With Ease If Rep

Category: Repositionable Labels

Masonry Box, 3-1/2 Inch Depth, 3-11/16 Inch x 2-1/8 Inch, Knockouts: 1/2 inch & 3/4 inch Concentric, Welded, Cubic Inches: 24, Steel

Category: Gangable Masonry Boxes

National Electrical Manufacturers Association (NEMA) Recommends Use Of Mr. Ouchlabels On Transformers Located In Public Areas. Our Transformer Markers Meet The NEMA Standard As Well As Underwriters Laboratory Performance Standard #969. Markers Are Made

Category: Shock Hazard Labels

Wire Mesh Strain Relief, Trade Size: 1-1/4 IN, Material: Stainless Steel, Finish: Stainless Steel, Connection: Female Threaded X Mesh, Standard: UL 514B, UL File Number E14814, CSA Number C22.2 18, CSA 065178, Class I, Division 2, For

Category: Straight Non-Metallic Liquidtight Flex Connectors

Replace The Numbers, Letters And Characters You Need In Your Porta-pack Books With Our Convenient Ten Pack Refills. Made Of Durable B-500 Vinyl Cloth Materialand Available In Over 250 Different Refill Packs. Each Refill Pack Contains 10pages.

Category: Wire Marker Cards

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Industrical Control Transformer, 3PH 225KVA 480-240 provides a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids, timers or other loads requiring above average voltage regulation when actuated.

Category: 225 - 300 KVA Dry Type Transformers

B100 Series, NEMA 1 Enclosed, Pushbutton Operator, Manual Motor Starter. Provides Manual Control and Overload Protection, Includes a 3-Pole BiMetallic Overload Relay, Field Mounted Auxiliary Contacts, Lockout Device Standard, 3-Pole, Frame Size M-1. 2 Hp @ 120V AC 1-Phase, 3 Hp @ 240V AC 1-Phase. 7.5 Hp @ 230V AC 3-Phase, 10 Hp @ 575V AC 3-Phase. Heater Unit Not Included; uses the FH Series.

Category: Enclosed Manual Starters / Switches

4" LED Lighted Finish Pack, CFM: 70, Sones: 1.5, Energy Star Qualified, Series: InVent. For Use With Broan A000HL Fan/Light Housing Packs To Complete The Installation. Includes: Fan Motor and White Grille. Housing L x W x D: 9-1/4" x 10" x 5-3/4". Grille Size: 11-3/4"L X 12-1/2"W.

Category: Fan Housing / Finish Packs

Sealing Gasket, Trade Size: 3-1/2 Inch, Material: Steel Backed Neoprene, Standard: Csa C22.2 No. 18.3, Csa 065178, Nema Fb-1, For Liquidtight Flexible Metal Conduit

Category: Liquidtight Connectors - Accessories

Battery Module, SDU Series, Chassis Mount, NEMA 1, HxWxD: 11.5: x 5.57" x 4.57". Includes: 6 ft Battery Cable. Up to (4) of these Battery Modules can be used with the SDU Series DC Voltage UPS.

Category: Uninterruptable Power Supply Batteries

Rotary Operator, Vari Depth Kit - 6" Shaft /Black, J250 Frame, Molded Case Circuit Breaker

Category: Molded Case Circuit Breaker Operating Mechanisms

Power Distribution Box, NEMA 3R Enclosure, Sled Base. Includes: (1) California Style Twist-Lock 50A 125/250V Power Inlet, (1) California Style Twist-Lock 50A 125/250V Power Outlet, (1) 30A 250V L6-30R Power Outlet and (6) 20A 125V L5-20R Power Outlets.

Category: Temporary Power Distribution Boxes

50 Amp, 125/250 Volt, NEMA 14-50R, 3P, 4W, Flush Mount Receptacle, Straight Blade, Industrial Grade, Grounding, Side Wired, Steel Strap - Black, 2.10" Diameter

Category: 50 Amp Straight Blade Receptacles

H412 3/4-AS/FS-GW Small Hydronic Heater uses the energy from a building’s hot water source. In-wall, Fan-Driven, Zone-Controlled Heat

Category: All Area Fan Forced Heaters

1024X1-12 SPANNER TAMPER PROO F MACHINE SCREW

Category: Spanner Tamper Proof Machine Screws

Spud Wrench Holder With Two Separate Loops For Carrying Multiple Spud Wrenches At A Time, Tucked Tunnel Loop Design Keeps Tools Tight To Belt And Accommodates Up To 3-Inch (7.6 Cm) Wide Belts, Durable, Full-Grain Russet Leather, Compatible With Klein Tools Tension Straps (Cat No. 5890) To Secure Spud Wrench Holder In Place On Tool Belt, Made In The Usa With Global Components, Brass Rivets With Washer Backing For Extreme Durability, Heavy-Duty Leather For Long Life

Category: Tool Holders