"mecr-750-b"

Conduit Bushing, Insulating, 4 Inch, Threaded, Impact Resistant, Plastic, For Use with Rigid/IMC Conduit

Category: Rigid & IMC Bushings

1/2 Inch Pipe Strap, Steel for Use with Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Conduit Hanger with Bolt, Diameter 1-1/2 Inch, Steel, For Use With Rigid/IMC/EMT to Threaded Rod

Category: Conduit Clamps

4 Inch Square, Exposed Work Cover, Type: (1) Toggle Switch, 1/2 Inch Raised, Drawn, Metallic, Cubic Inches: 5.0

Category: 4" Square Metallic Box Covers

Reducing Bushing, Threaded, 3 Inch x 2-1/2 Inch, Malleable Iron/Zinc Plated, For Use With Rigid/IMC Conduit.

Category: Iron Alloy Reducing Bushings

Ring Terminal, Expanded Vinyl Insulated, 18 to 14 AWG, 3/8 Inch Stud Size, 600 Volt, Blue, Package of 100 EA

Category: Vinyl Insulated Ring Tongues

4 Inch Square Box, Drawn, Metallic, Depth: 1-1/2 Inch, Side Knockouts: (2) 1/2 Inch, (1) 3/4 Inch, Bottom Knockouts: (3) 1/2 Inch, (2) 3/4 Inch, End Knockouts: (2) 1/2 Inch, (1) 3/4 Inch, Cubic Inches: 21.0

Category: 4" Square Metallic Boxes

Intermediate Cable Tie, Non-Releasable, Standard Cross Section, Weather Resistant. Length: 7" (177.8 mm). Width: 0.187" (4.75 mm). Color: Black. Package Quantity: 1000.

Category: Non-Releasable Cable Ties

Switch Box, 1 Gang, Non-Gangable, 3 x 2 Inch, Plaster Ears, Old Work, Welded, Metallic, Depth: 2-1/2 Inch, Bottom Knockouts: (2) 1/2 Inch, Side Knockouts: (1) 1/2 Inch, End Knockouts: (1) 1/2 Inch, Cubic Inches: 12.5

Category: Metallic Switch / Outlet Boxes

In-Use Cover, 1-Gang, Non-Metallic with Clear Cover, Depth: 2-7/8 Inch, For Use with Duplex, GFI, Switch and Single Receptacles

Category: 1-Gang Weatherproof In-Use Box Covers

Non-Metallic Sheathed Cable and Service Entrance Cable Connector, 3/4", Cable Range 0.44 - 0.74 Inch, Malleable Iron

Category: Iron NM Cable Connectors

Conductive Anti-Corrosion Joint Compound, Lubricating Sealant, 16 OZ Brush Cap Can, Gel

Category: Non-Shielded Resin Splices

Cable Tie, Miniature, UV Black Nylon, 4" Long, 1000/PK, 18 lb Tensile Strength, 5/8" Max Bundle Diameter

Category: Miniature Cable Ties

Conduit Bushing, Threaded, Diameter 2 Inch, Malleable Iron

Category: Rigid & IMC Bushings

Lug Kit, 6 AWG - 300 MCM, For use with S611 Series Frame B, 99 - 125 Amp Softstarters. Includes: 3 Lugs that can be used on the Line Side or Load Side.

Category: Softstarter Lug Kits

Reducing Bushing, 2 x 1-1/2 Inch, Threaded, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

Female Disconnect, Nylon Fully Insulated, 16-14 AWG, .25"x.032" Tab, Blue

Category: Female Nylon Insulated Wire Disconnects

Our Warning Stripe & Check Tapes Meet Osha Specification 1910.144(a) For Safetycolor Codes For Marking Physical Hazards. Made Of B-950 Vinyl With Permanent Adhesive To Hold On Almost Any Clean, Dry Surface. Colors Are Sealed Beneath Protective Layer Of

Category: Barricade Tape

Conduit Blanks, Snap-In Type, 1-1/4", Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Knockout Seals

1 IN Threaded Die Cast Aluminum Conduit Body, Back Opening, Use With Rigid/IMC Conduit, Aluminum Die Cast

Category: Type LB Aluminum Conduit Bodies

30 Amp, 120/208 Volt 3PY, NEMA L21-30R, 4P, 5W, Locking Connector, Industrial Grade, Grounding, Corrosion Resistant, Wetguard - BLACK

Category: 30 Amp NEMA Twist Lock Connectors

NM Cable Connector for Oval Cable, 1-1/4 Inch, 2-Screw Clamp, Zinc Die Cast

Category: Zinc Die Cast NM Cable Connectors

NW Series Ring Terminal, 12-10 AWG, .66 IN, Brazed Seam Barrel, Nickel Alloy, Metallic

Category: Non-Insulated Ring Tongues

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Copper, Tin Plated, For Code, AN Aircraft or Flexible Copper Cables, 2 AWG, 5/16 In Bolt Hole, Inspection Hole, Packed 10 per Box

Category: Non-Insulated Ring Tongues