"76701 mulberry metal products"

Assembled unit. Prewired 20A duplex receptacle can be wired as a standard duplex receptacle or isolated ground. Flange available in painted gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Slide covers match the painted flange colors: gray, black, and ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes two Ortronics TracJack adapters and two Ortronics Series II adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

Drill Bit, Black Oxide, Size: 1/16", Length: 1-7/8", Flute Length: 7/8", Shank: Round, 135° Split Point Tip, Application: Metal/Wood/Plastic

Category: Standard General Purpose Drill Bits

Reciprocating Saw Blade, Tuff Tooth, 18 TPI, Length: 6".

Category: Bi-Metal Reciprocating Saw Blades

ATA PFL2GH20L45K LED FLOOD

Bullet Camera, High Impact, 1/3" CCD, Resolution: 560 TVL, Min. Illumination: 0.1 Lux, Lens: 12 mm Lens, Power: 12VDC, Housing: IP68 Heavy Gauge Die-Cast Metal Alloy, All weather, Includes: Power Supply.

Category: CCTV & Video Surveillance Analog Bullet Cameras

Bronze Parallel Vise Connectors, Conductor Range: #6 - #2 - 5/8 Ground Rod

Category: Vise Connectors

Aluminum Clamshell Stirrups, Cable Range: Aac: 4-2/0 (.232" - .414") Acsr: 6-2/0 (.198" - .447")

Category: Clamshell Stirrup Connectors

Dead-End Insulator, Material: Silicone, Size: 11.5" Length, 5" Dia Weathersheds. Number of Weathersheds: 5. Leakage Distance: 22". Critical Impulse: 189 kV. 60 Hertz Flashover: 116 kV Dry, 92 kV Wet.

Category: Dead End Insulators

Quadrant Strain Clamp Clamping Range: .16 To .46, U-Bolt Number: 1, Ultimate Strength: 5000Lbs

Category: Guy Wire Clamps

Quadrant Strain Clamp Clamping Range: .20 To .84, U-Bolt Number: 4, Ultimate Strength: 30000Lbs

Category: Guy Wire Clamps

65mm Gator® Guillotine Remote Cable Cutter, 12V Charger, Cutting Range: Max. Dia With Insulation = 2.55" (65 mm), Jaw Size: Max. Dia With Insulation = 2.55" (65 mm), Can Be Used In Either Hand Held Or Remote Configuration, Tool Comes Standard With Remote Control (BTC3GL), Rigging Harness (BTC3-LH), 12V Makita Charger And Two 4.0Ah Batteries, Hard Side Metal Case

Category: Cordless Cable Cutters

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron Body with Aluminum Cover, Unilet, GRCA Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18 Cubic Inches and (3) 1/2 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof C Conduit Outlet Boxes

Neoprene High Performance Contact Adhesive, Gray-Green, 1-Quart, Adheres Sheet Metals, Such as Stainless Steel, Aluminum, Cold Rolled Steel and Many Plastics to Numerous Other Substrates

Category: Epoxy Adhesive

Squeeze Connector, 2-Screw, Straight, 1 1/4 Inch, Die Cast Zinc, For Use With Flexible Metal Conduit, With Insulated Throat

Category: Straight Squeeze Flex Connectors

Liquidtight Stain Relief Cord Connector, 45°, 1 Inch, Cord Range: .750 to .875 Inch, Malleable Iron, For Use With Liquidtight Flexible Metal Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

SuperDeep Strut Half Slotted Metal Channel, 9/16 x 1-1/8 IN Slots, 2 IN Spacing, 12 ga THK, 10 ft L

Category: Steel Strut with Elongated Holes

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRX Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 4.88 Inch Opening, 72 Cubic Inches and (4) 1-1/2 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof X Conduit Outlet Boxes

Liquidtight Connector, 3 inch, 45°, Insulated Throat, Zinc Electroplated Steel

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

EMT Combination Coupling, 1/2 Inch, EMT to Flexible Metal Conduit, Material: Malleable Iron

Category: Malleable Iron EMT To Flex Combination Couplings

Liquidtight Connector, Straight, 1-1/2 Inch, Insulated, Steel, For Use With Liquidtight Flexible Non-Metallic Conduit

Category: Straight Steel Liquidtight Flex Connectors

Squeeze Connector, 2-Screw, Straight, 1 1/2 Inch, Die Cast Zinc, For Use With Flexible Metal Conduit, With Insulated Throat

Category: Straight Squeeze Flex Connectors

Stainless Steel Cable Tie Mounts, 1-Hole, #10 Screw, .90" Long x .40" Wide

Category: Cable Tie Bases

Replacement Die, Round Knockout, Size: 1/2"

Category: Metal Stud Punches

AC/Flex Connectorector, 90°, Squeeze, 1-1/2 Inch, Malleable

Category: 90 Degree Two Screw Squeeze Flex Connectors