Search results

WMD AV3CTCBS AV3 COVER BS FLA

Category: Poke-Through Cover Assemblies

Multi-Service Poke-Thru, Finish Flange & Slide Holder Assembly, RC3 Series, Color: Black. Diameter: 7-1/2". Includes: 2 Ortronics TracJack mounting Bezels, and 2 Ortonics Series II bezels.

Category: Assembled Poke-Through Units

WMD AV9004BK BLANK

Category: Poke-Through Mounting Plates

Receptacle opening 1 3/8" (35mm). For 8" poke-thru units only.

Category: Poke-Through Mounting Plates

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Material/Finish: Die-Cast Aluminum/Bronze Powder-Coat.

Category: Poke-Through Cover Assemblies

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. No device plates are included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors.

Category: Assembled Poke-Through Units

A/V FL POKE-THRU ASSY/20A/AB/TC

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Finish Flange and Slide Holder Assembly, Non-Metallic Cover, Color: Gray. Diameter: 7". Depth: 16-1/2". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Cat 6 TechChoice Discrete Keystone Connectors and Ortronics TracJack Bezels. For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Prewired 15A quad receptacle can be wired as standard quad receptacle or isolated ground. Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). RC9 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC9 Assembled Unit-Brass Flange and Black Slide Holder, 15A Quad Receptacle Standard or IG Finish - Brass

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Aluminum. Diameter: 7 Inch. Depth: 10 Inch, Includes: Bezels to Accept 4 Ortronics TracJack Modular Jacks and (2) Ortronics Series II Modular Jacks

Category: Assembled Poke-Through Units

WLK RC4KTCBK SCRUB WATER RETR

Category: Assembled Poke-Through Units

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

For furniture feed applications. Includes two 1/2"" and one 3/4"" trade size conduit connectors. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Finish - Brass

Category: Assembled Poke-Through Units

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.Microphone connections are now available with Switchcraft

Category: Poke-Through Mounting Plates

Furniture feed insert with one 1 1/4" and one 1/2" trade size conduit to feed power and communication services. Use with RC9CFFTC Series Covers to form a complete poke-thru assembly. NOTE: RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

WIREMOLD AV7004BK

Category: Poke-Through Mounting Plates

Poke-Thru Device Assembly, 1-1/4" and 2" Conduit Openings and Closure Plugs, Color/Finish: Brass

Category: Assembled Poke-Through Units

COMM UFD FLUSH FTG BLACK

Category: Assembled Poke-Through Units

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

Used to upgrade existing installations of RC7 Poke-Thru Devices on carpet floors to meet scrub water requirements. Includes 20A duplex receptacle that can be wired as a standard duplex or isolated ground, and two Category 6 TechChoice discrete keystone connectors. Also includes scrub water finish flange and slide holder assembly. Flange available in painted black (BK), gray (GY), and brushed metal finishes in aluminum (AL), and brass (BS). Kit also includes duplex receptacle barrier. Old barrier

Category: Assembled Poke-Through Units

Poke-Thru, Tamper-Resistant, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Gray

Category: Poke-Through Cover Assemblies

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Surface, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

Available in black (BK), gray (GY), ivory (VY), nonmetallic brass (BS), and nonmetallic aluminum (AA).

Category: Poke-Through Cover Assemblies