Floor Box - Accessories

Cover Kit 6" Round Nickel-plated w/2 Flip Lids (fits FLBC4500LR)

Category: Recessed Floor Box Service Fittings

WMD 4DIV 4IN DIVIDER

Category: Recessed Floor Box Service Dividers

Device Plate, Galvanized Steel, Duplex Receptacle, For use with Two Gang Recessed Service Floor Box, 90 Cubic Inches, Length 10-1/4 Inches, Width 4-11/16 Inches, Depth 3-3/4 Inches, 3/4 Inch and 1 Inch Conduit Hubs, Cast Iron, Delivers Power, Communications and Data from Standard Conduit with No Exposed Service Fittings and Two Gang Recessed Service Floor Box, 90 Cubic Inches, Length 9-15/16 Inches, Width 5-3/32 Inches, Depth 3-3/4 Inches, 3/4 Inch and 1 Inch Conduit Hubs, Cast Iron, Delivers Power, Communications and Data from Standard Conduit with No Exposed Service Fittings

Category: Recessed Floor Box Service Fittings

W-mold 1230al Alum Abandon plate

Category: Recessed Floor Box Plate Plugs

Brass blanking plate with threaded base for 2" (51mm) IPS.

Category: Recessed Floor Box Plate Plugs

<p>Single duplex opening faceplate.</p>

Category: Recessed Floor Box Service Fittings

Round Cover Kit, 6 Inch Diameter, (2) Flip Lids, Brass, Hole Pattern Fits FLBC4500LR.

Category: Recessed Floor Box Service Fittings

Single-service fitting includes housing, base, two mounting frames, and mounting hardware. For use on 2" (51mm) IPS or PK Preset Systems. For PK activation, use in conjunction with FloorPort Partition Feed and PK Kit. Has 1/2" and 3/4" trade size conduit knockouts on each end. 53.3 cu. in. (906cm3) capacity.

Category: Recessed Floor Box Service Fittings

Module Assembly, 10 Gang

Category: Recessed Floor Box Service Fittings

Data Plate for 665 Series Floor Boxes, Galvanized Steel, Accepts 6 Keystone Jacks

Category: Recessed Floor Box Service Fittings

2" IPS to 3/4" Afterset Insert Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with a disposable construction cover. Unit works with 10" Evolution cover assemblies (10CTC). All cover assemblies are sold separately and are available in the following finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

Nonmetallic sleeve attaches to structural decking and maintains 6" - 6 1/8" diameter cast in hole. Unit includes three (3) attachment legs, two (2) end caps and three (3) thumb screws.

Category: Recessed Floor Box Tools

WIREMOLD CAF3-DP1 DUPLEX PWR

Category: Recessed Floor Box Service Fittings

Sc 665-gp Floor Box Receptacl

Category: Recessed Floor Box Service Fittings

RFB6 DEVICE PLATE W/ EXTRON AAP

Category: Recessed Floor Box Service Fittings

1" (25mm) I.D. grommeted opening. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

2" IPS Afterset insert - 2 7/8" Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Recessed Service Device Plate, Type: Blank, Steel/Galvanized, For Use With 665 Series Floor Boxes

Category: Recessed Floor Box Service Fittings

Accepts one CM2 Series communication connectivity and three Legrand AVIP or Extron Electronics MAAP Series Devices.

Category: Recessed Floor Box Service Fittings

Conduit Housing Assembly, 1-1/2", Use On 8AT, 8ATC, and 8STC Series Devices.

Category: Recessed Floor Box Service Fittings

20 AMP DEVICE PLATE W/RECEP TR DEC

Category: Recessed Floor Box Service Dividers

Accepts standard 15A and 20A duplex receptacles. NOTE: Standard size for device plates for Plate Location 1 is 6 11/32" (161mm) x 2 3/4" (62mm).

Category: Recessed Floor Box Service Fittings

Material: Brass, Size: 1.50in

Category: Recessed Floor Box Plate Plugs