Search results

2-Gang, Cover Plate Flange, Non-Metallic, Color: Brown. WxL: 8-7/8" x 5-3/4". For use with: 829PFLRT, 829PFL Covers and Accepts MAB6TJ, MAB3S2, CM-MAB and CM Series Inserts in Carpet and Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

Sheet metal adapter plate that accepts two (2) Extron Electronics MAAP style device plates (sold separately). For use with 828GFITC or 828GFITCAL Cover Plates (sold separately).

Category: Recessed Box Adapters

Locking Nipple. Length: 1". For use with: 1" IPS Openings.

Category: Recessed Floor Box Service Fittings

Floor Box Cover, 1-Gang, Communication Cover Plate, Cover Type: Single Service (2-5/8 Inch or 1 Inch Opening), Device Type: Communication Cable, Brass

Category: Square / Rectangle Recessed Box Covers

Brushed aluminum GFI receptacle cover plate, 5 1/2" (140mm) for carpet. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service.

Category: Round Recessed Box Covers

1IN CENTER COMP CON FEED FOR EVO PT

Category: Recessed Floor Box Service Fittings

Provides separation of services. Includes one (1) divider plate. Evolution 8 and 10-Gang Floor Box Divider

Category: Recessed Floor Box Service Fittings

Floor Box Cover, 1-Gang, Non-Metallic, Cover Type: Non-Metallic GFI. Device Type: Decorator/GFCI Receptacle. brown.

Category: Square / Rectangle Recessed Box Covers

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black. Diameter: 8-1/4 Inch. Depth: 9-1/16 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (1) Ortronics TracJack Mounting Bezel & (1) Ortronics Series I

Category: Poke-Through Cover Assemblies

One and a half-gang 2" trade size conduit housing assembly. Recommended for use with furniture feed devices (6ATCFF). Covers the center compartment and one of the side compartments.

Category: Poke-Through Mounting Plates

<p>Combination device plate that will accept up to three (3) Extron Electronics MAAP style plates, and up to two (2) ports of communication devices. For use in the center compartment only. Devices supplied by others.</p>

Category: Poke-Through Mounting Plates

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Black

Category: Round Recessed Box Covers

Closes off unused gangs. NOTE: For RFB2 Series Floor Boxes only.

Category: Recessed Floor Box Service Fittings

Single-gang device plate that will accept up to six (6) ports of communication devices. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Flangeless Cut-Out Cover Assembly, For Use In Tile Applications, Material: Die Cast Aluminum, Color: Black

Category: Square / Rectangle Recessed Box Covers

Device plate for 8in and 10in poke thru units that will accept either decorator, GFCI, 106 style devices for power and audio/video applications. Finish - Designer Ivory

Category: Square / Rectangle Recessed Box Flanges

4-1/4" Round Cover, Metallic, Cover Type: Brass or Aluminum cover plate (1/2" Opening). Device Type: Communications or Power Cover Plate. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

2-Gang, Cover Plate Flange, Metallic, Color: Brass. WxL: 7.624" x 4.524". For use on: 880S2, 880M2, 880CS2-1, 880CM2-1 Floor Boxes in Tile Applications

Category: Square / Rectangle Recessed Box Flanges

Duplex Bracket, Internal, Accomodates 15/20A Duplex Receptacles, For Use With RFB4 Series Floor Boxes

Category: Recessed Floor Box Service Fittings

Multi-Service Assembled Poke-Thru Device Communication Adapter, For (2) 3/4 Inch Conduit Connectors, Non-Metallic

Category: Poke-Through Mounting Plates

5-1/2" Round Cover, Non-Metallic, Cover Type: Two Door/Dual Service. Device Type: Duplex Receptacle. Color: Aluminum.

Category: Round Recessed Box Covers

Poke-Thru Device, Recessed, Assembled Unit, Metallic Cover, Color: Black (Die Cast). Recessed: 3-1/4". Diameter: 8". Depth: 16-3/4". Includes: (2) Duplex Receptacles (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade). For use with Carpet & Tile Applications

Category: Assembled Poke-Through Units

5-1/2" Round Cover, Metallic, Diameter: 5-1/2 Inch, (2) 1-1/2 Inch Screw Plugs, Furnished With Gaskets and (3) Screws, Brass

Category: Round Recessed Box Covers

2" IPS Afterset insert - 2 3/8" Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings