"efb6s-og co"

Floor Box, 6-Gang, Includes: (2) Removable Modules, (2) Cable Management Guides, (2) Leveling Support Legs.

Category: Square Recessed Floor Boxes

Hub allows 2" conduit to be fed into the back of EFB6S and EFB6S-OG Floor Boxes. Maximum of six (6) hubs per box.

Floor Box, 6 Gang, Evolution Series, 4.130 x 13.750 x 16.130 Inch, 915.980 Cubic Inches, Aluminum With Black Finish

Category: Square Recessed Floor Boxes

WM EFB10S-OG 10-GANG FLOOR BO

Category: Square Recessed Floor Boxes

Floor Box, 8-Gang, Dimensions: Height: 11-3/16 Inch, Width: 15-1/8 Inch, Depth: 6 Inch, Material/Finish: Steel, Cubic Inches: 246

Category: Square Recessed Floor Boxes

For carpet, tile and wood covered floors. For use in on-grade and above grade concrete floor applications. Box is provided with a protective, disposable cover that allows the box to be installed at any point in the construction process. Box is available with an epoxy

Category: Square Recessed Floor Boxes

WMDEFB45SOG ** this does include support legs**

Category: Square Recessed Floor Boxes

WMD EFB6S-FC2222 6GANG FC FLO

WMD EFB6S-FC1122 6GANG FC FLO

WMD EFB6S-1032-HWB EVOLUTION

Designed to be installed in above grade concrete floors while maintaining the fire classification of the floor. This box is classified to be used in 2-hour fire rated floors. Designed to accept standard size wall plates. Box comes complete with all components needed for initial installation. Included components are: protective/disposable cover, tunnel system for connecting the two modules of compartments, fire classified pan, two (2) removable modules, four (4) 1 1/4 intumescent conduit feeds and two (2) cable management guides. Items not included with the box and sold separately are: receptacles, communication jacks, and A/V devices and device plates. NOTE: For use on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.) Designed for new construction applications. Consult structural engineer before making cuts into decking. Add additional supports as instructed by the structural engineer.

Floor Box, Rectangular, Dual Service, Depth: 4", Metallic

Category: Recessed Adjustable Floor Boxes

Floor Box, 2 Gang, On Grade Type, 3 Inch Depth, (14) Knockouts 1, 3/4, and 1-1/4 Inch, Steel

Category: Square Recessed Floor Boxes

WMDCCBBS-OG

Category: Recessed Adjustable Floor Boxes

Barrier Kit, Used To Separate Power and Communication Wires in Partition Feed Covers, Supplied With Base and Three Extensions To Adjust To Cover Height. For Use With RFB2, RFB2-OG, RFB2-SS, RFB4 and RFB4-SS Floor Boxes.

Category: Recessed Floor Box Service Dividers

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately. Black

Category: Round Recessed Box Covers

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

For use in concrete floors. For use with round Evolution Series cover. Fully adjustable with tunnel compartments. Supplied with two (2) duplex mounting plates. Other plates sold separately.

Category: Square Recessed Floor Boxes

WIREMOLD RFB11-OG LRG CAPACITY ONGRADE FLOOR BOX 6IN

Category: 1-Gang Raceway Device Brackets & Plates

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

Co-extruded design, smooth plastic finish with adhesive backing. Available in 6' (1.8m) lengths, packed 120' (36.6m) per carton. 2900 Series. Ivory Finish - White

Category: 1-Piece Non-Metallic Raceway

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

WMD WMPAC526CVR-KIT PAC526 CO

WMD WMPAC525CVRWKIT PAC525 CO