"kg5295-l"

Eaton B-Line series pre-assembled corner plate, 3.5" H x 3.5" L x 1.62" W, Steel, Electro-plated, 1/4" Gauge

Category: Flat Plate Strut Channel Connectors

Eaton B-Line series corner plate, 7.62" H x 7.62" L x 1.62" W, Steel, DURA GREEN, 1/4" Gauge

Category: Flat Plate Strut Channel Connectors

Eaton corrosion resistant locking receptacle, #14-10 AWG, 20A, Industrial, 125V, Back and side wiring, Yellow, Single, Corrosion resistant, L5-20, Two-pole, Three-wire, Thermoplastic

Category: 20 Amp NEMA Twist Lock Single Receptacles

EZL Wire Marker Label for Wire Range 4-6, Heat-Shrink White Polyolefin, 1/2 inch, 5 feet length

Category: Heat Shrink Wire Marker Labels

Eaton B-Line series end cap, 0.82" H x 1.62" L x 1.62" W, Steel, Electro-plated, 12 Gauge, Fits channel type B52

Category: Strut Channel Safety End Caps

Eaton corrosion resistant locking plug, #14-10 AWG, 30A, Industrial, 125V, Back wiring, Yellow, Safety grip, Corrosion resistant, L5-30, Two-pole, Three-wire, Thermoplastic, 0.38 to 1 in

Category: 30 Amp NEMA Twist Lock Plugs

THB 54880BEPH CU TP 2HL LUG L

Category: 2-Hole Long Barrel Copper Compression Lugs

Abb Ehdb280c-1l 3p Drive Cont contr.280a 120/60 L/t

Category: Variable Frequency Drive Replacement Parts

C-h 578d461g01 L-63 3 P Contact Block

Category: Starter & Contactor Auxiliary Contacts

Two Gang Square Device Cover, 9 Cubic Inches, 4 Inch Square x 3/4 Inch Raised, Pre-Galvanized Steel

Category: 4" Square Metallic Box Mud Rings

AMF STR250B2-1/2" LT STR CON INSUL THROAT

Category: Straight Steel Liquidtight Flex Connectors

Non Insulated Parallel Splice Connector, 22 To 16 AWG, .129 IN OD Barrel, .314 IN L, Copper

Category: Parallel Splices

Wide Slot Wire Duct. W x D x L: 3" x 3" x 6'. Color: Gray. Material: PVC, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT ***Item Does Not Include Cover***

Category: High Density Wire Duct

2-Piece Cable Tie/Fir Tree Mount, 15.0"L, .38"–.39" Mounting Hole, 50lb, PA66HIRHS, Black

Category: Screw Mount Cable Ties

BRA B30C-500-595-BL

Category: Labeling Tape

Fire Barrier Pass-Through Device, Square Device, 4 Inch Wide x 4 Inch Height x 10 Inch Length, Device Only, No Mounting Flanges

Category: Fire Barrier Pathways

Reinforced Concrete Lid, W x L x D: 11" x 15" x 1-3/4", Lid Marked: "No Mark", Limited to Stock On Hand, ***T-Series no longer available - use item 097068***

Category: Non-Metallic Underground Pull Box Covers

Ladder Cable Tray, 2 Inch High x 12 Inch Wide x 10 Feet Long, Type 304 Stainless Steel

Category: Straight Wire Basket

Rhino-Hide 15 Series Female Panel Receptacle, Cam-Type, 3/4"L Threaded Stud, #8 - #2 AWG

Category: Taper Nose Panel Receptacle Cam Connectors

Dual High-Fidelity Sensonic Speakers With Bluetooth Wireless Technology. Works With Most Broan and NuTone QT-Series Fans and Fan/Lights. Dimensions L x W x H: 10-1/4" x 2-3/4" x 3-1/8".

Category: Fan Audio Accessories

Cable Gland, Type Straight, Thread Size 2 Inch NPT, Constructional Feature Flameproof, Explosion-Proof, Cable Type Unarmored, Tray, Shipboard, SO Cable, Cable Outer Diameter 1.4 to 1.74 Inch, Material Nickel Plated Brass, Length 3.76 Inch, Enclosure NEMA 4X, IP66/IP67/IP68, Operating Temperature -60 to 85 Deg C, Approval UL 2225/E161256, CSA C22.2, Seal Material Low Smoke Fumes Thermoplastic Elastomer, Epoxy Putty, Thread Size 15 MM L x 1.5 MM Pitch, Maximum Number of Cores 3.5 Inch, Weight 0.62 Kg

Category: Cable Glands - Nickel Plated Brass

Heat Shrink, Thin Wall, Cross-Linked Polyolefin Tubing, Color: Black, Conductor Range: 22 AWG - 18 AWG, Shrink Ratio: 2:1, Nominal Diameter: 3/64", Tube Length: 48". Provides: Flame, Moisture, and Abrasion Protection in Stain Relief and Wire Bundling Applications.

Category: Thin Wall Heat Shrink

Single Ended Size C Cordset, Straight Male x Pigtail Connector, 12 ft L Cable, 12 Poles, Single Keyway

Category: 12-Pin Cordsets

Ironworker Tool Belt Set With Quick Release Leather Belt, Bolt Bag, Spud Wrench Holder, Connecting Bar Holder, Multi-Functional Bull Pin Holder, Tension Straps, 3-Pocket Tool Holder, A Pro-Pad, Leather Belt With Side Sizing Adjustment Fits 32-Inch To 40-Inch (81 To 102 Cm) Waist Band, Crafted From Thick Full-Grain Leather And Reinforced With Heavy-Duty Rivets With Washer Backings, All Holders Are Built To Withstand The Toughest Of Job Site Conditions, Every Holder Features Tucked Tunnel Loops That Securely And Comfortably Hang Higher Up On Belts And Harnesses, All Leather Products Are Proudly Cut, Sewn, Riveted, And Packaged Here In The Usa, All Holders Ensure Easy Access To All Your Tools For Enhanced Efficiency And Productivity, Not An Occupational Protective Belt

Category: Tool Belts