"ab-10104sb the austin co."

Constructed Of Durable Polyester, Our Lockout Tags Exceed Osha's 50 Lb Pull Requirement For Tagout Devices. Rigid Polyester Surface Is Easy To Write On And Stays Legible Longer Than Cardstock. The 3/8 Diameter Brass Eyelet Accepts Most Padlock Shackles.

Category: Lockout Tags

Hard Hat Top Pad Made With Durable, Flame-Resistant Material, Tested To Astm F1506-20 And Astm F2621/F2621M-22 (Flame Resistance And Arc Flash Exposure), Padded To Prevent Straps From Digging Into Head Large Diameter Helps Reduce Hair Tangles, Sweat-Wicking And Odor Control Properties To Stay Cool And Fresh All Day Long, Machine Washable To Allow For Reuse Multiple Times, Easy, Hook And Loop Attachment Method To The Klein Tools Hard Hat Suspension, Fits On Klein Tools Safety Helmets, Full-Brim And Cap-Style Hard Hats (Sold Separately), Sold In A 3-Pack

Category: Hard Hat Liners

Hard Hat Sweatband Made With Durable, Flame-Resistant Material, Tested To Astm F1506-20 And Astm F2621/F2621M-22 (Flame Resistance And Arc Flash Exposure), Padded To Prevent Straps From Digging Into Head, Large Diameter Helps Reduce Hair Tangles, Sweat-Wicking And Odor Control Properties To Stay Cool And Fresh All Day Long, Machine Washable To Allow For Reuse Multiple Times, Easy, Hook And Loop Attachment Method To The Klein Tools Hard Hat Suspension, Fits On Klein Tools Safety Helmets, Full-Brim And Cap-Style Hard Hats (Sold Separately), Sold In A Pack Of 3

Category: Hard Hat Liners

3M™ 8560 3 Way Cold Shrink Cable Breakout Boot is made of a dark gray silicone rubber and protects the phase leg breakout of 3 way medium voltage power cables. It shields power cables from moisture, contamination, corrosion, ozone, UV radiation, physical contact and other hazards in associated environments. It allows quick installation while accommodating a wide range of cables.

Category: Breakout Boots

The 4/4X Filter Fan Shroud extends electronics life by mitigating dust and water ingress. This Filter Fan Shroud Type 4/4X HH13, HH13MS61004 item colored Gray with a material of Steel.

Category: Enclosure Cooling Fan Shroud Kits

Opti-Core® Fiber Optic Pigtail, OM3, 1 fiber, 900µm buffered fiber, LC to pigtail multimode simplex pigtail,(one LC connector on one end and open on the other end) 1 meter

Category: Fiber Optic Patch Cords

<p>Brass GFI receptacle cover plate, 4 1/4'' (108mm) for tile. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service.</p>

Category: Round Recessed Box Covers

Right Angle Beam Clamp, 1/2 Inch Diameter, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Right Angle Type K-Clamps

Indoor/Outdoor vinyl labels for the Label Cartridge for BMP21 Series, ID PAL, LabPal Printers. White ribbon on purple tape.

Category: Permanent Tapes

2-Pack Of Tubing Cutter Replacement Blades, Durable Blade For Long-Lasting Cutting Performance, Easily Replaceable Blade; Use Push Pin Or Standard Screwdriver, For Use With All Klein Tools Tubing Cutters (Cat. Nos. 50046, 50047, 50048, 50049, 50055, 50056, 50057, 50061), 9Crsi Cut Rating To Stand Up To The Demands Of Your Jobsite, Cuts Copper And Aluminum Tubing

Category: Tube Cutters

The SL Series Surface Mount Wall Heater, 250, 500, 750, 1000, 1250, 1500 Watts, 2.1-12.6 Amps, Color: White

Category: All Area Fan Forced Heaters

Cable Stripper, Capacity: 1/0 AWG-1000 MCM, Adjustable 4" Depth Guage, for End and Mid-Span Terminations,Replaceable Precision Razor Sharp Safely Enclosed Within the Tool

Category: Wire Strippers

Tradesman Pro™ Tool Station Tool Bag Backpack, 21 Pockets, 17.25-Inch, 21 Pockets & Large Interior For Maximum Tool Storage, Front Of Backpack Unzips Halfway For Quick Tool Access Or Fully Extends For Workstation Access, Made Of Water Resistant 1680d Ballistic Weave Material For Durability, Elastic Loop Holds Work Light (Cat. No. 56028 Sold Separately) For Hands-Free Illumination Of Backpack Interior When Working In Low Light Areas, Orange Interior For Easy Tool Visibility, Extra Padding On The Shoulder Straps & Back For Carrying Comfort, Adjustable Chest & Lower Straps For A Customized Fit, Front Zipper Pocket For Small Item

Category: Backpacks

Module Kit 3-wire For The C30 Mechanically Held Lighting Contactor, 30 Amp, 24vdc

Category: Lighting Contactor Mechanical Hold Kits

Right Angle Beam Clamp, 1 Inch Diameter, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Right Angle Type K-Clamps

RAC 5839-6WRTR 1G WP BOX / CO

The Orléans convector boasts the fastest temperature rise on the market. Its optional built-in thermostat is equipped with the Zigbee protocol. Its standard, high and low models offer greater installation flexibility, regardless of the available wall space. Energy efficiency, connectivity, a slim profile and a variety of sizes are what make it the industry benchmark.

The Orléans convector boasts the fastest temperature rise on the market. Its optional built-in thermostat is equipped with the Zigbee protocol. Its standard, high and low models offer greater installation flexibility, regardless of the available wall space. Energy efficiency, connectivity, a slim profile and a variety of sizes are what make it the industry benchmark.

WiFi Adapter (USB Connection) For The nLight ECLYPSE (nECY) System Controller

Category: WiFi Area Lighting Controllers

Compact enclosures WM, for isolator door locking, material: Door: Sheet steel, 2.0 mm, all-round foamed-in PU seal, Enclosure: Sheet steel, Mounting plate: Sheet steel, zinc-plated, surface: dipcoat-primed and powder-coated, textured paint, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, Gland door with universal cut-out for disconnectable circuit, description: These flange mount disconnect wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

30 Amp Plug Fuse, Time-Delay, 125 Volt, Tron, Size Rejecting, No-interghangeability prevents installing a higher amp fuse than the circuit was designed for; Has ability to withstand typical motor starting surges; Use in residential or light-duty motor circuits; Threades into SA adaptors.

Category: Plug Fuses

Side panels, screw-fastened, sheet steel, for TS, TS IT, material: Sheet steel, 1.5 mm, surface: dipcoat-primed, powder-coated on the outside, color: RAL 7035, supply includes: Assembly parts, description: Side panels, screw-fastened, sheet steel, for TS. Packaging Unit: 2 pc(s).

Category: Side Mount Enclosure Panels

Mounting bars, for TS, SE, CM, TP, For the inner mounting level and for mounting on doors, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: For attaching cable ducts, cable conduit holders, contact hazard protections, door installations, cable clamping and attachment, etc. Packaging Unit: 20 pc(s).

Category: Rack Mounting Kits & Hardware

LEDBarKit-Internal Driver (PRO Series) Light Bar: Length: 43.3", Specialty LED fixture with LED diodes which make the bar shine Violet (VLT).

Category: LED - Strip Fixtures