"ab-886ws the austin co."

Battery Module, SDU Series, Chassis Mount, NEMA 1, HxWxD: 11.5: x 5.57" x 4.57". Includes: 6 ft Battery Cable. Up to (4) of these Battery Modules can be used with the SDU Series DC Voltage UPS.

Category: Uninterruptable Power Supply Batteries

National Electrical Manufacturers Association (NEMA) Recommends Use Of Mr. Ouchlabels On Transformers Located In Public Areas. Our Transformer Markers Meet The NEMA Standard As Well As Underwriters Laboratory Performance Standard #969. Markers Are Made

Category: Shock Hazard Labels

Meter Socket, Residential Type Cover, 200A, Overhead/Underground, 3-5/16 Inch Hub, 3/8 Inch Stud, 4-Jaw, 1-Phase, 3-Wire, Ringless, 600 Volt AC, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

C-H 1MP6206RRL GROUP METERING, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Meter Packs

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

A rigid steel pedestal with die-cast legs and mounting holes for bolting to the floor or casters. This Pedestal with Legs, AP36L44LG item measures 36.00x4.00x4.00 inches with a material of Steel colored Lt Gray.

Category: Industrial Consolet Pedestals

Power Distribution Box, NEMA 3R Enclosure, Sled Base. Includes: (1) California Style Twist-Lock 50A 125/250V Power Inlet, (1) California Style Twist-Lock 50A 125/250V Power Outlet, (1) 30A 250V L6-30R Power Outlet and (6) 20A 125V L5-20R Power Outlets.

Category: Temporary Power Distribution Boxes

4" LED Lighted Finish Pack, CFM: 70, Sones: 1.5, Energy Star Qualified, Series: InVent. For Use With Broan A000HL Fan/Light Housing Packs To Complete The Installation. Includes: Fan Motor and White Grille. Housing L x W x D: 9-1/4" x 10" x 5-3/4". Grille Size: 11-3/4"L X 12-1/2"W.

Category: Fan Housing / Finish Packs

LEV 1N480-1D S1K 2P3W 100:01A, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Submeters

1/4" Bit Ratchet, Tough-Absorbing Bits, Rapidaptor Holder, Adaptor And 1/4" Sockets, Ideal For Working In Confined Spaces, Tough Viscous Bits For Universal Use, Use Of 1/4" Sockets Also Possible With The Wera Adaptor 870/1, Take It Easy Tool Finder: Colour Coding According To Profile And Size

Category: Combination Screwdriver/Nutdrivers

Nlight Commissioning Kit, The nCom Kit Contains: Ethernet Crossover Cable (10 ft) USB Cable (36 in) USB type A male to USB Type B Male USB Serial Converter: (USB B Female to DB-9 Female) Serial to Ethernet Converter (DB-9 Male to RJ45 Female) CAT 6 M/F Crossover Coupler Ethernet "Dongler", (10 in) One RJ45M to two RJ45 Female

Category: VFD Configuration Software & Cables

LED Highbay Retrofit Lamp: Type B - bypass the ballast; 38W (85w Equiv.), 120V, Bulb: T120, Base: E26, Lumens: 3800, CRI: 82, Color Temperature: 5000K, Rated Life: 25,000 Hrs. CC# 541960, 12NC 929001990104, CAT# 38HB/LED/850/ND FB 6/1.

Category: High Bay LED Lamps

Penetrate Into Wall Cavities And The Inside Face Of Exterior Walls To Measure Insulation Moisture Levels.

Category: Moisture Meters

N3R BUSWAY 1200A 4 BUS 65K 6FT, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

Support Channel Kit (Rod Not Supplied), For Use to Prevent Bending of the Operating Handle Mounting Surface

Category: Circuit Breaker Mounting Kits

Range Taking Ground Rod Clamp for 3/8-3/4in. Rod This heavy duty ground rod clamp replaces all existing ground rod clamps, eliminating the need to stock several different sizes and types. UL Listed for direct burial in earth and concrete, heavy duty construction enables it to handle large ground wires up to 1/0 AWG- much larger than a standard ground rod clamp. Suitable for 3/8", 1/2", 5/8", 3/4" ground rods.

Category: Ground Rod Ground Clamps

Bussed Gutter, NEMA 3R, 400 Amp, 10K, 6 Feet, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

App Stb9038l 3/8 Ins L/t 90d conn

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

800A MCB METERING MAIN, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

250A MCB METERING MAIN, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

APP STN38SR 3/8" LFMC HUB ADA

Category: Liquidtight Strain-Relief Grips with Mesh

C-H 3MM412R12RLB 3MM-THREE-PH, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Residential Meter Stacks

Self-Adjusting Wire and Cable Cutting and Stripping tool. Strips and cuts #32 AWG – 5 AWG (0.03 – 16mm²) wire, with adjustable stripping length from 3.0-21mm. The tool is designed to prevent damage or fanning of conductors, and features an ergonomic light

Category: Combination Wire Stripper / Cutter Tools

Concrete mounting template required for precise positioning of conduits and bolt locations when installing the Power Block 1000 with a bottom cable entry in poured concrete applications. Contains one template.

Category: EV Charger Mounting Mechanisms