"ab-6648st the austin co."

App 4125us 1-1/4" Emt Stl Ss connector Made In The Usa

Category: Steel EMT Set Screw Connectors

Screwdriver Set, 3/16-Inch Cabinet tip, 6-Inch round shank (Cat. No. 601-6), and #2 Phillips, 7-Inch round shank (Cat. No. 603-7), Precision Machined Tips Provide A More Consistent Geometric Symmetry To Accurately Fit And Torque Without Slippage, Tip-Ident® Quickly Identifies The Screwdriver Type And Tip Orientation, Cushion-Grip

Category: Screwdriver Sets

Eaton house panel, 400A, Aluminum, No bypass, NEMA 3R, Underground, 22 kAIC, Lug landings for compression, lugs not included, DK2400, Surface mounting, Sockets:1, None, Ring, Type BR breakers, 120/240V, 4306, Single-phase, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: House Panels

Pliers, Long Nose Side-Cutters, Hi-Viz, 8-Inch, Glow in the dark grips to easily locate your tool in dark or low lit areas

Category: Long Nose Pliers

Standard Meter Center, All-in-one, 3/4-inch (19.1 Mm) Ch Type- Euserc, 150 Amp,22 Kaic, 8 Distribution, 4 Jaws, Main Breaker Included Csr2150, Ring Security, Ug/oh Service, Feed Through Lugs, NEMA 3r - Rainproof Enclosure, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Braided Expandable Sleeving, 0.75" diameter (19.1mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Flame Retardant, Polyethylene Terephthalate, 100 ft. per reel

Category: Braided Expandable Sleeving

Padlocking Wing Knob provides the ability to lock a cabinet while maintaining a higher UL rating. This Padlocking Wing Knob, PTWPSS item measures 1.97x1.30x1.00 inches with a material of SS316 finish Brushed.

Category: Heater Replacement Knobs

19-inch Rack-Mountable Tray enhances the natural convection airflow within a cabinet. This 19-inch Rack-Mountable Tray 1Ux7.60, A19FT3B item colored Black with a material of Steel.

Category: Enclosure Cooling Fan & Exhaust Packages

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a red, nylon housing. It has a tab size of 0.187 x 0.032" (4.8 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.78" (19.8 mm) lon

Category: Female Nylon Insulated Wire Disconnects

Disconnect Operating System. Includes: Black Rotary Lever, Shaft Support & 24" Rigid Shaft. For NEMA 3R Applications. Used with F-Frame Breakers.

Category: Molded Case Circuit Breaker Operating Mechanisms

Closure Plate used to close the end of a CleanTray wireway run. This Closure Plate CleanTray, CT22CPSS item measures 2.00x2.00in with a material of SS304 finish Brushed.

Category: Wireway Closure Plates

Vertical Pole-Mount Channel facilitates pole-mounting on the ComLine product. This ComLine Vertical Pole-Mount Channel, EPMC6 item fits 600mm with a material of Aluminum colored Black.

Category: Enclosure Mounting Bracket Kits

Closure Plate used to close the end of a CleanTray wireway run. This Closure Plate CleanTray Sloped Top, CTS66CPLSS item measures 6.00x6.00in with a material of SS304 finish Brushed.

Category: Wireway Closure Plates

Cable Runway Retaining Post Kit mounts to the rack side stringer providing extra ladder rack capacity. This Retaining Post Kit, LRP item finish Plated with a material of Steel.

Category: Cable Tray Mounting Hardware

A stainless steel pedestal with legs and mounting holes for bolting to the floor. This Pedestal with Leg, AP36SS item measures 36.00x8.00x8.00 inches with a material of SS Type 304.

Category: Industrial Consolet Pedestals

Extra deep pre-cut pushbutton enclosures give the most room for deep contact blocks and wiring. This Extra-Deep Pushbutton Enclosure Type 12, E10PBX item measures 10PBx30.5mm with a material of Steel colored Gray.

Category: Steel Pilot Device Enclosures

Closure Plate used to close the end of a CleanTray wireway run. This Closure Plate CleanTray, CT44CPSS item measures 4.00x4.00in with a material of SS304 finish Brushed.

Category: Cable Tray Ends

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Brass

Category: Round Recessed Box Covers

National Electric Code requires electrical distribution equipment to be rated as ôService Entranceö, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

A rigid steel pedestal with die-cast aluminum base and mounting holes for bolting to the floor. This Bolt-Down Pedestal, AP33B44LG item measures 33.00x4.00x4.00 inches with a material of Steel color Lt Gray.

Category: Industrial Consolet Pedestals

ProTek Rack Angles support 19in rack equipment in the single and double-hinged ProTek product. This ProTek Rack Angles Square, PTRA48S item measures 45.50 26U with a material of Steel finish Plated.

Category: NEMA 4 Wall Mount Enclosures

Replacement Contact Kit For The Advantage Starter , NEMA Size 4, 3-pole

Category: Starter & Contactors - Replacement Contact Kits

3M™ Scotchlok™ 40000 1 Hole Compression Lug is suitable for use on copper or aluminum conductors. The lug has a standard barrel that ensures a secure fit. Aluminum construction offers high conductivity and an electro tin plated finish resists corrosion. It is rated for 35 kV voltage applications.

Category: 1-Hole Aluminum Compression Lugs

Multiple Meter Socket, Ringless, No Bypass, 2-position, 4 Terminals, 100 Amp, 600 Vac, Oh/ug Service, Hub Provision Only, Service Ground Lug #14-2 Cu/al, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass