"ab-1010uc the austin co."

Closure Plate used to close the end of a CleanTray wireway run. This Closure Plate CleanTray, CT22CPSS item measures 2.00x2.00in with a material of SS304 finish Brushed.

Category: Wireway Closure Plates

Vertical Pole-Mount Channel facilitates pole-mounting on the ComLine product. This ComLine Vertical Pole-Mount Channel, EPMC6 item fits 600mm with a material of Aluminum colored Black.

Category: Enclosure Mounting Bracket Kits

Closure Plate used to close the end of a CleanTray wireway run. This Closure Plate CleanTray Sloped Top, CTS66CPLSS item measures 6.00x6.00in with a material of SS304 finish Brushed.

Category: Wireway Closure Plates

Cable Runway Retaining Post Kit mounts to the rack side stringer providing extra ladder rack capacity. This Retaining Post Kit, LRP item finish Plated with a material of Steel.

Category: Cable Tray Mounting Hardware

A stainless steel pedestal with legs and mounting holes for bolting to the floor. This Pedestal with Leg, AP36SS item measures 36.00x8.00x8.00 inches with a material of SS Type 304.

Category: Industrial Consolet Pedestals

Extra deep pre-cut pushbutton enclosures give the most room for deep contact blocks and wiring. This Extra-Deep Pushbutton Enclosure Type 12, E10PBX item measures 10PBx30.5mm with a material of Steel colored Gray.

Category: Steel Pilot Device Enclosures

Closure Plate used to close the end of a CleanTray wireway run. This Closure Plate CleanTray, CT44CPSS item measures 4.00x4.00in with a material of SS304 finish Brushed.

Category: Cable Tray Ends

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Brass

Category: Round Recessed Box Covers

National Electric Code requires electrical distribution equipment to be rated as ôService Entranceö, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

A rigid steel pedestal with die-cast aluminum base and mounting holes for bolting to the floor. This Bolt-Down Pedestal, AP33B44LG item measures 33.00x4.00x4.00 inches with a material of Steel color Lt Gray.

Category: Industrial Consolet Pedestals

ProTek Rack Angles support 19in rack equipment in the single and double-hinged ProTek product. This ProTek Rack Angles Square, PTRA48S item measures 45.50 26U with a material of Steel finish Plated.

Category: NEMA 4 Wall Mount Enclosures

Replacement Contact Kit For The Advantage Starter , NEMA Size 4, 3-pole

Category: Starter & Contactors - Replacement Contact Kits

3M™ Scotchlok™ 40000 1 Hole Compression Lug is suitable for use on copper or aluminum conductors. The lug has a standard barrel that ensures a secure fit. Aluminum construction offers high conductivity and an electro tin plated finish resists corrosion. It is rated for 35 kV voltage applications.

Category: 1-Hole Aluminum Compression Lugs

Multiple Meter Socket, Ringless, No Bypass, 2-position, 4 Terminals, 100 Amp, 600 Vac, Oh/ug Service, Hub Provision Only, Service Ground Lug #14-2 Cu/al, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

NLB 200A 4J OH, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Type CH EUCERC Retrofit Meter Breaker, Retrofit solutions, CSR2125BM main breaker, 125A, Single-phase, 120/240V, Ring, 2 spaces, 4 circuits, 35 kAIC, Surface mounting, NEMA 3R enclosure, Aluminum bus, Overhead feed, Four-jaws, 1 socket, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - Solar Ready

C-H 37MM240R1240 COMMERCIAL S, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Commercial Meter Stacks

Single Meter Socket, Ringless, Lever Bypass, 4 Jaws, 320 Amp, 600 Vac, Oh/ug Service, Hub Closure Plate, Service Ground Lug #14-2 Cu/al, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

Eaton 55 Series Photoelectric Sensor, Photoelectric, Right Angle, Sensor distance: Depends on the detector used, Body: Noryl, Lens: Nylon enclosure, 6.6 Ft. ( 2m ) Cable, 90-132 Vac input, Thu-Beam, 6 Ft. ( 1.8m )

Category: High Performance Photoelectric Thru-Beam Sources

Residential Meter Stack Module, Ringless Style Covers With Horn Bypass, 3-phase,4 Meter Sockets, 125 Amp Socket Rating, 800 Amp Bus Rating, Aluminum Bus, Requires Plug-on Type Main Tenant Breaker, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Residential Meter Stacks

MTR/PO 240V W/TB 100A 7 PT, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

Circ-a-w U404430mcc 400a Mete r Cb Ctr, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Made Of B-500 Repositionable Vinyl Cloth Material, Our Wm Series Wire Markers Are Able To Withstand Moderate Heat, Oil And Dirt. Labels Hold Tightly To The Wire Due To Their High Adhesion Properties And Can Be Re-used With Ease If Repositioning Is Requir

Category: Wire Marker Cards

30 Amp, 2-Pole, Compact Definite Purpose Contactor, 600V Rated, Binding Head Screw Terminals, 277V AC Coil. ***No Replacement Coils Available for the Compact Series***

Category: 2-Pole Definite Purpose Contactors