"pib300 american fittings corporation"

Chase Nipple, 1 Inch Diameter, Steel Alloy With ZInc Chromate Finish

Category: Steel Chase Nipples

Male connector with 3/4 inch trade size conduit opening for connecting raceway to conduit boxes or panel boxes that have KOs for conduit. Can also be used with conduit type fittings. When used with 700 Series Raceway, break out crescent twistout in connector.

Category: Metallic Raceway Connectors & Adapters

Liquidtight Connector, 45 Degree, 1 Inch Diameter, Steel With Zinc Finish, Includes Sealing Washer

Category: 45 Degree Steel Liquidtight Flex Connectors

Closes off the open end of 2000 Series Raceway. Gray

Category: Small 2-Piece Metallic Raceway End Fittings

Liquidtight Connector, 90 Degree, 1-1/2 Inch Diameter, Steel With Zinc Finish, Includes Sealing Washer

Category: 90 Degree Steel Liquidtight Flex Connectors

EMT Compression Coupling, 1 Inch Diameter, Rain Tight, Steel With Zinc Chromate Finish

Category: Steel Raintight EMT Compression Couplings

EMT Set Screw Coupling, 1/2 Inch Diameter, Steel With Zinc Finish, For Use With Rigid and IMC Conduit

Category: Steel EMT Set Screw Couplings

(2) 14 AWG Conductors and (1) 14 AWG Ground, NM-B, Solid Copper Conductor, PVC Jacket, 90°C Insulation, 600V, White, 250 ft. Package, Non-Metallic Sheathed Cable

Category: 14 AWG NM-B

EMT Compression Connector, 1-1/4 Inch Diameter, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Chase Nipple, 3/4 Inch Diameter, Steel Alloy With ZInc Chromate Finish

Category: Steel Chase Nipples

Liquidtight to EMT Adapter, 1/2 Inch Diameter, Steel With Zinc Finish, For Use Converting Liquidtight Conduit to EMT Conduit

Category: Steel Liquidtight To EMT Combination Couplings

EMT Compression Connector, 1 Inch Diameter, Insulated, Rain Tight, Steel With Zinc Chromate Finish

Category: Steel Raintight EMT Compression Connectors

Liquidtight Connector, 90 Degree, 2 Inch Diameter, Steel with Zinc Chromate Finish, Includes Sealing Washer

Category: 90 Degree Steel Liquidtight Flex Connectors

Armored Cable Strap, 3/8 Inch Diameter, 1 Hole, Steel/Zinc

Category: Steel 1-Hole Conduit Straps

One Piece Strut Clamp, With Back Plate. 3-1/2" EMT; 3-1/2" Rigid. Static Load Limit: 350 lbs. Standard Packaging Quantity: 10.

Category: Strut Channel One Piece Pipe Clamps

J-Hook with Multi-Function Clip, Diameter 2", Rod Size 1/4", Wire Size: #12 - #8, 50 Pack.

Category: J-Hook From Wire/Rod & Beam

Reducing Bushing, 1 x 3/4 Inch, Steel With Zinc Finish, For Use With Rigid/IMC Conduit in Ordinary Locations

Category: Steel Reducing Bushings

EMT Set Screw Connector, 1-1/4 Inch Diameter, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel EMT Set Screw Connectors

J-Hook, Diameter: 2", Steel, 50 Pack

Category: J-Hook - Screw-On

Rigid Compression Connector, 1 Inch Diameter, Steel With Zinc Finish, Concrete Tight, For Use With Rigid/IMC Conduit

Category: Steel Rigid Conduit Compression Connectors

1/2 Inch EMT Conduit, Steel, 10 Foot Length

Category: Straight Steel EMT Conduit

EMT Set Screw Connector, Insulated, 3/4 Inch Diameter, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel EMT Set Screw Connectors

Multimeter With Non-Contact Voltage, Maximum Rating 600 Volt, Features: True RMS, Voltage, Amperage, Continuity, Ohms, Diode Test, Capacitance & Surge Protection, Test Leads & User Manual

Category: Multimeters

Strain Relief Connector, Liquid-Tight, Type: SL/SLR, PG Thread: PG11, Diameter: 0.157 -0.394 Inch, Material: Non-Metallic, Light Gray

Category: Cable Glands - Non-Metallic