"connector waterproof"

Easy-Splice Heat Shrinkable End Cap 4/0 AWG - 750 MCM These caps replace greases, tapes, epoxy, encapsulation, or dips. In most sizes, installation may be accomplished in less than one minute. Heat-shrinkable end caps provide for efficient and positive cable end sealing. Made of thermally stabilized polyolefin, the interior of the HSC is coated with a meltable sealant to assure a watertight seal, complete insulation, abrasion and corrosion resistance. Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit. HSC end sealing caps are qualified to ANSI C119.1-1986 and rated to ICEA electrical withstand test for 1,000 volts. HSC end sealing caps can be used as a live seal for cables carrying up to 1,000 volts. They can also be used as end seals for storing and pulling de-energized cable.

Category: Heavy Wall Heat Shrink

(1) 500-6 Primary (12) 4-14 Secondary, Power Distribution Block

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

NSI 800T-2 STEP PANEL LUG (2)

Category: 2-Conductor Aluminum Mechanical Lugs

NSI 6-350LL8 LUG 350 MCM-6 AW

Category: 4-Conductor Aluminum Mechanical Lugs

Vinyl Insulated Spade, 12-10 AWG, 300 Volt, #6 Stud, Yellow, Pack Of 15

Category: Vinyl Insulated Standard Fork Terminals

NSI AL2-38 2 AWG ALUM COMPRES

Category: 1-Hole Aluminum Compression Lugs

NSI GL338 3 AWG CU COMPRESSIO

Category: 1-Hole Copper Compression Lugs

2X500-6 LINE 2X500-6 LOAD

Category: 2-Hole Aluminum Compression Lugs

6 Awg Cu Compression Lug, 3/8" Bolt Size

Category: 1-Hole Copper Compression Lugs

1 Hole Long Barrel Copper Compression Lug 4 AWG - 1/4" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .

Category: 1-Hole Long Barrel Copper Compression Lugs

ALUM COMPRESSION LUG NARROW TANG 500 MCM

Category: 2-Hole Long Barrel Aluminum Compression Lugs

NSI L156 1 AWG CU COMPRESSION

Category: 1-Hole Long Barrel Aluminum Compression Lugs

NSI L314 3 AWG CU COMPRESSION

Category: 1-Hole Long Barrel Copper Compression Lugs

NSI ASC2/0T 2/0 AWG ALUM COMP

Category: Standard Barrel Aluminum Compression Sleeves

Nylon Insulated Ring Terminal, 4 AWG, 5/16? Stud, 15 per Pack

Category: Nylon Insulated Ring Tongues

8 AWG Nylon Insulated Ring #10 Stud, 25 Per Pack

Category: Nylon Insulated Ring Tongues

Vinyl Insulated Ring Terminal, 22-18 AWG, #6 Stud, 300 Volt, Red, 1000 per Pack

Category: Nylon Insulated Ring Tongues

Vinyl Insulated Ring Terminal, 12-10 AWG, #8 Stud, 300 Volt, Yellow, 500 Per Pack

Category: Nylon Insulated Ring Tongues

Nylon Insulated Ring Terminal, 12-10 AWG, #6 Stud, 600 Volt, Yellow, 50 per Pack

Category: Nylon Insulated Ring Tongues

Nylon Insulated Ring Terminal, 12-10 AWG, #8 Stud, 600 Volt, Yellow, 50 per Pack

Category: Nylon Insulated Ring Tongues

NSI R6-10 # 6 TERMINAL

Category: Nylon Insulated Ring Tongues

Nylon Insulated Ring Terminal, 12-10 AWG, 5/16" Stud, 600 Volt, Yellow, 40 Per Pack

Category: Nylon Insulated Ring Tongues

Ring Terminal, Nylon Insulated, 16 - 14 AWG, Stud Size: #10, Color: Blue, Package of 100 Each.

Category: Nylon Insulated Ring Tongues

Copper Compression Lug, Conductor Size: 1/0 AWG, 2-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 2-Hole Long Barrel Copper Compression Lugs