"1/4" beam clamps"

Conduit Clamp, 3/4 Inch, B422 Series, Right Angle, Steel, Hot Dipped Galvanized, For Use With 3/4 Inch Conduit or Pipe

Category: Malleable Iron EMT Right Angle Type K-Clamps

4" Grounding Wedge, Bronze with Tin Plating. For use with Rigid/IMC Conduit.

Category: Ground Wedges

4 Amp, 250V, 217 Series, Glass Cartridge Body, Fast-Acting Fuse

Category: Electronic Fast Acting Fuses

Rigid Strut Strap, 3/4 Inch Diameter, Aluminum With Stainless Steel 316 Hardware, For Use With Rigid/IMC Conduit

Category: Conduit Strut Strap - Aluminum

Ground Rod Clamp, 3/4 Inch Rod, 10 to 2 AWG, Bronze

Category: Ground Rod Ground Clamps

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 2 Inch, 4 AWG to 2/0 AWG, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

ARL 726 1-1/4-2 SND/CST FL

Category: Bare Wire Ground Clamps

4 Inch Square Box, Welded, 1-1/2 Inch, NL Flush Bracket, Sides (2) 1/2 & (1) Eccentric Knockouts, End (4) 21/32 Inch Knockouts, Bottom (1) 1/2 Inch, Steel, For Use With Armored Cable/Metal Clad Cable and Flexible Metal Conduit Clamps.

Category: 4" Square Metallic Boxes With Brackets

Permaground Bronze Ground Clamp, Conductor Range 4-8, Pipe Sizes 1/2 to 1in

Category: Armored Cable Ground Clamps

Foam Carrier, Diameter: 1-1/4 inch, Includes: 3/Bag

Category: Conduit Pistons

HD Telescoping Bracket, Between Stud Assembly, 4" Box, 1 Gang Adjustable Mud Ring, Steel

Category: Prefab Assemblies

Floor Box Assembly, 2-1/4" Round, Drop-In, Non-Metallic, Cover Type: Screw Plug. Device Type: Single Receptacle, Data Port or Blank. Color: Aluminum. Cubic Inches: 11.8". (1) Single Grounded Receptacle, ***Hole Saw is not included***

Category: Assembled Recessed Round Boxes

Eaton B-Line series adjustable beam clamp, 1.5" H x 9" L x 3.7190" W, Steel, 700 Lbs load cap, 1/2"-13 thread/rod size

FBC nVent ERIFLEX Flexibar/Cable to Busbar Clamp, 0.2" Busbar Thickness, 1 mm² Stranded-4 mm² Stranded

Clamp Back, Size: 3/4 Inch, Material: Zinc Die Cast

Category: Clamp Backs - Iron

Snap-On End Section. Type: FEM6D. Color: Gray. Thickness: 1 mm. Used with Terminal Block Type: MA 2,5/5.D, M 4/6.D, M 4/6.D2.H, M 1,5/6.D2.HH and M 4/6.D2.M.

Category: Terminal Block End Sections

Photoelectric Sensor, Comet Series, Thru-beam, Source, 20 Foot (6 M) Sensing Range, Infrared Beam, 20-264 Vac, 15-30 Vdc, Connector

Category: Normal Duty Photoelectric Thru-Beam Sources

EMT Rigid/IMC Set Screw Coupling, 4 inch, Material: Steel

Category: Steel EMT Set Screw Couplings

Support, Pipe, Outer Diameter of Conduit or Pipe .840, Nominal Conduit Size 1/2 Inch, Malleable Iron, For Mounting Pipe or Conduit Verticall Across Beam

Category: Malleable Iron EMT Edge Type K-Clamps

OCA PAR21/2-G 2 1/2 OCAL PAR

Category: PVC Coated Parallel Beam Clamps

NEMA Type 4 two door enclosure on floorstands with clamps for wet, non-corrosive environments. This Two-Door with Floorstand Type 4, A74H72JULP item measures 74.06x72.06x24.06 inches with a material of Steel colored Gray.

Category: NEMA 4 Floor Mount Enclosures

Cast Bronze Ground Clamp, Cable to Water Pipe or Copper Tube, 10 - 2 AWG, 4-1/2" - 6" Water Pipe.

Category: Bare Wire Ground Clamps

Ground Clamp, Cable to Water Pipe, Rebar, or Ground Rod, 8 to 4/0 AWG, 1/2 Inch to 1 Inch Water Pipe, Rebar #4 - #6, Ground Rod 3/8 Inch to 1 Inch

Category: Ground Clamps With Hub

Eaton Crouse-Hinds series Square Outlet Box, (1) 1/2", 4", F, 4, AC/MC clamps, Welded, 1-1/2", Steel, (2) 1/2", (1) 1/2", (1) 3/4" E, 22.0 cubic inch capacity

Category: 4" Square Metallic Box Extension Rings