"22218-500"

Machine Screw, Slotted Flat Head, Size: 3/4" x 3/4". Zinc Plated Steel. Package Quantity: 100.

Category: Slotted Flat Head Machine Screws

10-24 X 1-1/2 Flat Head Square/Phillips Machine Zinc

Category: Slotted Pan Head Machine Screws

Inline Splice for Joining Tape Shield, Wire Shield, UniShield® and LC Power Cables, 0.84 to 1.38-in O.D. Insulation

Category: Medium Voltage Cold Shrink Splice Kits

Inline splice for joining JCN and flat strap neutral power cables, 1.08 to 1.7-in O.D. Insulation

Category: Medium Voltage Cold Shrink Splice Kits

Inline Splice for Joining Tape Shield, Wire Shield, UniShield® and LC Power Cables, 1.24 to 2.07-in O.D. Insulation

Category: Medium Voltage Cold Shrink Splice Kits

Armored Cable Grounding Kit, #6 AWG Jumper, 24 Inch Length, 2-Hole Compression Lug, Grounding Terminal, #12-24 and M6 Thread-Forming Screws, Black Polypropylene Terminal Cover

Category: Bonding Jumpers

DOTTIE 36P214 3/16 X 2-1/4 P

Category: Concrete Screw Anchors

8-32 X 3/8 Round Head Square/slotted Machine Zinc

Category: Square Drive / Slotted Combo Round Head Machine Screws

5/8 X 6 Hex Head Tap Bolts Zinc Plated

Category: Hex Head Bolts

10-32 X 1/2 Round Head Square/slotted Machine Zinc

Category: Square Drive / Slotted Combo Round Head Machine Screws

Stainless steel hex head cap screws are used in non-critical application with nuts and washers. Length is determined from the base of the fastener head. 18-8 Stainless steel is used where corrosion resistance is required. 18% chromium, 8% nickel.

Category: Hex Head Bolts

Product Type (NB, WB) : Wire Wheel Diameter : 6" Arbor Hole : 5/8" - 11 Maximum Speed (RPM) : 8,500 Wire Material : Carbon Steel Wire Type : Knot Cable Twist Wire Diameter : .02" Face Width : 1/4" Wire Length : 1-3/8" Application (wire brushes) : Cleaning Welds Package Quantity : 1

Category: Welding Cleaning Brushes

Dimensions 99.74 ft L Width 0.50 in Length 99.74 ft Label/Tape Size 0.5 in W x 100 ft L Ribbon Size 100 ft L Roll Length 100 ft Roll Width 0.5 in Thickness 0.004 in Material Number B-595 (View Technical Data Sheet) Material Vinyl Label Properties Aggressive Adhesive, Harsh Environment, Permanent Adhesive Adhesive Type Permanent Acrylic Finish Gloss Color Clear Resistance Properties Abrasion-Resistant, Chemical-Resistant Indoor or Outdoor Use Outdoor Use Service Temperature Range °F -40 °F - 180 °F Minimum Service Temperature °F -40 °F Maximum Service Temperature °F 180 °F Minimum Application Temperature °F 0 °F Compatible Surface Types General

Category: Labeling Tape

500MCM 2H COP LUG

Category: 2-Hole Long Barrel Copper Compression Lugs

PERMASLEEVE HEAT-SHRINK LABELS 0.5 IN DIA YELLOW 1 IN RL/100

Category: Heat Shrink Wire Marker Labels

Wraparound Cable Repair Sleeve, 3/0 AWG - 400 MCM, 19.7" Sleeve Length

Category: Heat Shrink Repair Kits

Hex Nut, Stainless Steel, 3/4"

Category: Stainless Steel Hex Nuts

Broan® Wall Heater, High Capacity, 2,000-Watt heater at 240-Volts can be converted to produce 750-Watt at 208 VAC, 1,000-Watt at 240 VAC or 1,500-Watts at 208 VAC. With thermostat. White grill.

Category: All Area Fan Forced Heaters

PermaSleeve Heat Shrink Wire and Cable Labels for M6 M7 Printers - 0.5" Diameter x 1", Polyolefin, White

Category: Heat Shrink Wire Marker Labels

10 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

The 4-Post rack combines the stability of a cabinet with the accessibility of an open rack to deliver maximum flexibility. The 45 RU rack is 23 inches wide overall (with 19 inch standard EIA mount) and 30 inches deep, with adjustable mounting rails that have cage nut EIA universal mounting hole spacing, and printed numbering. A range of cable managers and accessories work with the rack. The rack is UL listed for 2,500 pounds and is made of welded steel. The rack is black.

Category: Floor Mount Racks

Wire Marker Label, Dimensions: 1/2" x 12.5', Material: Flexible Nylon, Color: White

Category: Permanent Labels

12A, 600VAC, 300VDC, Industrial & Electrical Fuses UL Class RK1 Duel Element Time Lag (Slo-Blow)

Category: Class RK1 Power Fuses

BRACKET CURVED WALL MOUNT 12 Inch X 13 Inch

Category: Mounting Accessories