"rfn-250 industries, llc"

NSI GP-250-0 250 MCM - 1/0 AW

Category: Aluminum Tap Lugs

NSI P16-250-3N-BULK 16-14 AWG

8 Wire Polaris 250 MCM-6 AWG Uninsulated Multi-Cable Connector Polaris Uninsulated Multi-Cable Connectors are made from 6061-T6 aluminum alloy and are plated for corrosion resistance. They are stacked in one hole increments, up to 14 holes and are suitable for use on wire from #4 AWG to 750 MCM. UL Listed 486B Wire Connector. AL9CU. Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Non-Insulated Multi-Tap Connectors

Easy-Splice Direct Burial Roll-On Splice Sleeve for 250 - 600 MCM

Category: Low Voltage Direct Burial Splice Kits

NSI TL250-L2 250 MCM - 1/0 AW

Category: 2-Conductor Copper Mechanical Lugs

NSI F12-250-3V-P 12-10 AWG VI

Category: Female Vinyl Insulated Wire Disconnects

3 Port Panelboard Lug 250 MCM - 6 AWG Panelboard style for multi-conductor with NEMA mounting hole spacing for turn prevent and secureness. Made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with copper or aluminum conductors. Rated 600 volts (2000V max per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C. All hole spacing is NEMA standard of 1.750".

Category: 3-Conductor Aluminum Mechanical Lugs

NSI IPLD250-3B 250 MCM - 6 AW

Category: Dual Sided Entry Wire Connector Blocks

Polaris™ Insulated Multi-Tap Connector, 6 Port (Dual Sided Entry), 750 - 250 MCM, 600 Volt, Black, Plastisol

Category: Dual Sided Entry Wire Connector Blocks

Insulated Multi-Cable Stacked Connector Block, Wire Entry Either Side, 600V, Number of Ports: 10, Wire Range: 6 AWG - 250 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

NSI IPL250-4B 250 MCM - 6 AWG

Category: Single Sided Entry Wire Connector Blocks

4 Wire Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Blocks Polaris Insul-Tap Connectors are suitable for connecting four wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Category: Single Sided Entry Wire Connector Blocks

1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 250 MCM - 1/2" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

8 Port Aluminum Dual Rated Transformer Connector 250 MCM - 6 AWG Transformer Connectors are made from 6061T-6 aluminum alloy. They are electro-tin plated for low contact resistance. Two NEMA 1/2" holes for easy attachment. Rated 600 volts.

Category: Transformer Lug Kits

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 5, Wire Range: 250 MCM - 750 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

NSI HTF16-250-3 USED AS 86539

NSI F12-250-3N-BULK 12-10 AWG

Mechanical Single-Indent Heavy Duty Lug Crimpers APPLICATIONS: Crimper is a manually operated single-indent compressor tool. It has a wire range of CU-250 MCM to 8 AWG AL-4/0 AWG to 8 AWG. It requires no dies.

NSI F16-250-3-P 16-14 AWG BAR

NSI P16-250-3 16-14 AWG BARE

NSI FCT12-250-3-S COMPRESSOR

NSI HWHS250-1000-9 250-1000 M

Category: Heavy Wall Heat Shrink

NSI HWHS250-1000-48 250-1000

Category: Heavy Wall Heat Shrink

NSI HWHS250-1000-12 250-1000

Category: Heavy Wall Heat Shrink