"pts4/0 industries, llc"

NSI KC12-1/0 U-TYPE DIE #1/0

Category: Wire Crimping Dies, Adapters, & Blades

NSI IPLD3/0-4B 3/0-6 AWG POLA

Category: Dual Sided Entry Wire Connector Blocks

NSI IPL3/0-4B 3/0-6 AWG POLAR

Category: Single Sided Entry Wire Connector Blocks

NSI KA12-3/0 U-TYPE DIE #3/0

Category: Wire Crimping Dies, Adapters, & Blades

NSI SP1/0 1/0 AWG SET SCREW P

Category: Single Sided Entry Wire Connector Blocks

NSI IPLG3/0-3B 3/0-4 AWG ( BC

Category: Single Sided Entry Wire Connector Blocks

1 Hole Long Barrel Copper Compression Lug 3&frasl-0 AWG - 3/8" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .

Category: 1-Hole Long Barrel Copper Compression Lugs

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 8, Wire Range: 14 AWG - 1/0 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

NSI KC12-2/0 U-TYPE DIE #2/0

Category: Wire Crimping Dies, Adapters, & Blades

NSI IPLD3/0-3B 3/0-6 AWG POLA

Category: Dual Sided Entry Wire Connector Blocks

NSI KC12-3/0 U-TYPE DIE #3/0

Category: Wire Crimping Dies, Adapters, & Blades

Easy-Splice In-Line Gel Splice Kit with Connector, 2 - 4/0 AWG, Black, 1000 Volt

Category: Low Voltage Gel Filled Splice Kits

Dual Rated Turn Prevent Lug 2/0-14 AWG Dual Rated Turn Prevent Lugs are made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with both copper and aluminum conductors. Rated 600V (2000V max. per UL486B). UL 486A/B Listed. Temperature Rating 90 degrees C.

Category: 1-Conductor Aluminum Mechanical Lugs

Offset Pin Terminal 2/0 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

Category: Aluminum Pigtail Adapters

Nsi Bs400t2 Dual Range Lug two 250 Mcm- 1/0 Or Four 250 Mcm- 1/0

Category: 1-Conductor Aluminum Mechanical Lugs

NSI NCH-250-0 .250 NYLON CABL

Category: Cable Straps

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 8, Wire Range: 6 AWG - 3/0 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Dual Range Lug One 600 MCM - 4 AWG, Two 250 MCM - 1/0 AWG - 1 Count Dual Range Lugs are set screw connectors that will accept either one or two wires. Made of 6061T-6 aluminum alloy. Electro-pin plated for low contact resistance. For use with copper or aluminum conductors. Rated 600 Volts (2000V max. per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C.

Category: 1-Conductor Aluminum Mechanical Lugs

Pre-Insulated Service Entry Sleeves 3/0 - 1/0 AWG Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Category: Standard Barrel Aluminum Compression Sleeves

Easy-Splice Direct Burial Splice Kit with Rubber Cover 14 - 2/0 AWG Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Low Voltage Direct Burial Splice Kits

Aluminum Multiple Connector 2/0-14 AWG 8 Holes Multiple connectors are made from eithercopper or aluminum bar and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper or aluminum conductors.

Category: Load Center Neutral & Ground Bars

Cable Connector Block Replacement Sleeves for ITOG-3/0

Category: Copper Crimp Connectors

NSI NPDB-26-2/0-1 PDB 1 POLE,

Ground Clamp HD with Adapter, Silicon Bronze, 1/2"-1" Water Pipe, 10 SOL-2/0 STR, Length: 2.2"

Category: Ground Clamps With Hub